Ultraviolet-assisted gas sensing: A potential formaldehyde detection approach at room temperature based on zinc oxide nanorods

Zinc oxide nanorods were synthesized using a simple hydrothermal method. Formaldehyde-sensing characteristics were investigated without and with ultraviolet (UV) light irradiation. The gas response of nanorods to 110 ppm formaldehyde with UV light irradiation was about 120 times higher than that without UV light irradiation. The detection limit was as low as 1.8 ppm at room temperature. This high gas response under the UV light is attributed to photocatalytic oxidation. Furthermore, the significant improvements of the selectivity and recovery time were obtained after irradiating the nanorods with UV light. Our results demonstrated that applying UV light irradiation on the zinc oxide nanorods is an effective approach to achieve higher response and excellent selectivity to formaldehyde at room temperature.

[1]  Zhijun Zhang,et al.  A study of the photocatalytic oxidation of formaldehyde on Pt/Fe2O3/TiO2☆ , 2000 .

[2]  Elisabetta Comini,et al.  UV light activation of tin oxide thin films for NO2 sensing at low temperatures , 2001 .

[3]  Y. G. Wang,et al.  Adsorption and desorption of oxygen probed from ZnO nanowire films by photocurrent measurements , 2005 .

[4]  C. N. R. Rao,et al.  Ammonia sensors based on metal oxide nanostructures , 2007 .

[5]  Guangzhao Zhang,et al.  In2O3 hollow microspheres: synthesis from designed In(OH)3 precursors and applications in gas sensors and photocatalysis. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[6]  Hong-Ming Lin,et al.  UV enhancement of the gas sensing properties of nano-TiO2 , 2003 .

[7]  C. Ao,et al.  Photodegradation of formaldehyde by photocatalyst TiO2 : effects on the presences of NO, SO2 and VOCs , 2004 .

[8]  Peidong Yang,et al.  Photochemical sensing of NO(2) with SnO(2) nanoribbon nanosensors at room temperature. , 2002, Angewandte Chemie.

[9]  Liang Peng,et al.  Light induced enhancing gas sensitivity of copper-doped zinc oxide at room temperature , 2008 .

[10]  Liang Peng,et al.  Fabrication and photoelectric oxygen sensing characteristics of electrospun Co doped ZnO nanofibres , 2007 .

[11]  Peidong Yang,et al.  Nanowire ultraviolet photodetectors and optical switches , 2002 .

[12]  Hiroyuki Kudo,et al.  A bio-sniffer stick with FALDH (formaldehyde dehydrogenase) for convenient analysis of gaseous formaldehyde , 2008 .

[13]  Peng Song,et al.  Formaldehyde-sensing characteristics of perovskite La0.68Pb0.32FeO3 nano-materials , 2005 .

[14]  Ulrich Simon,et al.  Metal and metal oxide nanoparticles in chemiresistors: does the nanoscale matter? , 2006, Small.

[15]  D. Zhang.  Adsorption and photodesorption of oxygen on the surface and crystallite interfaces of sputtered ZnO films , 1996 .

[16]  A. Fujishima,et al.  Autoxidation of Acetaldehyde Initiated by TiO2 Photocatalysis under Weak UV Illumination , 1998 .

[17]  A. Hagfeldt,et al.  Purpose-Built Anisotropic Metal Oxide Material: 3D Highly Oriented Microrod Array of ZnO , 2001 .

[18]  Chen-Sheng Yeh,et al.  Hydrothermal Synthesis of SnO2 Nanoparticles and Their Gas-Sensing of Alcohol , 2007 .

[19]  S. Lenaerts,et al.  FT-IR characterization of tin dioxide gas sensor materials under working conditions , 1995 .

[20]  Che-Hsin Lin,et al.  MEMS-based formaldehyde gas sensor integrated with a micro-hotplate , 2006 .

[21]  Frank E Osterloh,et al.  Chemical sensing with LiMo3Se3 nanowire films. , 2005, Journal of the American Chemical Society.

[22]  J. Yates,et al.  Light-induced charge separation in anatase TiO2 particles. , 2005, The journal of physical chemistry. B.

[23]  Michael S Strano,et al.  Understanding the dynamics of signal transduction for adsorption of gases and vapors on carbon nanotube sensors. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[24]  T. Tachikawa,et al.  Mechanistic Insight into the TiO2 Photocatalytic Reactions: Design of New Photocatalysts , 2007 .

[25]  P. Werle,et al.  Spectroscopic gas analyzers based on indium-phosphide, antimonide and lead-salt diode-lasers. , 2002, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[26]  N. Bârsan,et al.  Conduction Model of Metal Oxide Gas Sensors , 2001 .

[27]  A. Fujishima,et al.  KINETICS OF PHOTOCATALYTIC REACTIONS UNDER EXTREMELY LOW-INTENSITY UV ILLUMINATION ON TITANIUM DIOXIDE THIN FILMS , 1997 .

[28]  Jenshan Lin,et al.  Hydrogen-selective sensing at room temperature with ZnO nanorods , 2005 .

[29]  Liang Peng,et al.  Surface photocurrent gas sensor with properties dependent on Ru(dcbpy)2(NCS)2-sensitized ZnO nanoparticles , 2006 .

[30]  The characteristic of photoelectric gas sensing to oxygen and water based on ZnO nanoribbons at room temperature , 2008 .

[31]  Zhi-xuan Cheng,et al.  A new route for preparing corundum-type In2O3 nanorods used as gas-sensing materials , 2007 .

[32]  M. Hein,et al.  Changes of the DC resistivity and the broadband IR reflectivity of thin metal films due to coverage , 1995 .

[33]  Nan Zhang,et al.  On-line monitoring of formaldehyde in air by cataluminescence-based gas sensor , 2006 .

[34]  Patrick L. Feng,et al.  Achieving fast oxygen response in individual β-Ga2O3 nanowires by ultraviolet illumination , 2006 .

[35]  M. Meyyappan,et al.  Carbon Nanotube Sensors for Gas and Organic Vapor Detection , 2003 .