Anatase mesoporous TiO2 nanofibers with high surface area for solid-state dye-sensitized solar cells.

Mesoporous nanofibers (NFs) with a high surface area of 112 m(2)/g have been prepared by electrospinning technique. The structures of mesoporous NFs and regular NFs are characterized and compared through scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and selected area electron diffraction (SAED) studies. Using mesoporous TiO(2) NFs as the photoelectrode, solid-state dye-sensitized solar cells (SDSCs) have been fabricated employing D131 as the sensitizer and P3HT as the hole transporting material to yield an energy conversion efficiency (η) of 1.82%. A J(sc) of 3.979 mA cm(-2) is obtained for mesoporous NF-based devices, which is 3-fold higher than that (0.973 mA cm(-2)) for regular NF-based devices fabricated under the same condition (η = 0.42%). Incident photon-to-current conversion efficiency (IPCE) and dye-desorption test demonstrate that the increase in J(sc) is mainly due to greatly improved dye adsorption for mesoporous NFs as compared to that for regular NFs. In addition, intensity modulated photocurrent spectroscopy (IMPS) and intensity modulated photovoltage spectroscopy (IMVS) measurements indicate that the mesopores on NF surface have very minor effects on charge transport and collection. Initial aging test proves good stability of the fabricated devices, which indicates the promise of mesoporous NFs as photoelectrode for low-cost SDSCs.

[1]  Mingfei Xu,et al.  Efficient and stable solid-state dye-sensitized solar cells based on a high-molar-extinction-coefficient sensitizer. , 2010, Small.

[2]  W. Sim,et al.  Direct Spectroscopic Evidence for a Photodoping Mechanism in Polythiophene and Poly(bithiophene‐alt‐thienothiophene) Organic Semiconductor Thin Films Involving Oxygen and Sorbed Moisture , 2009 .

[3]  Dong Young Kim,et al.  Charge Transport Characteristics of High Efficiency Dye-Sensitized Solar Cells Based on Electrospun TiO2 Nanorod Photoelectrodes , 2009 .

[4]  Craig A Grimes,et al.  Visible to near-infrared light harvesting in TiO2 nanotube array-P3HT based heterojunction solar cells. , 2009, Nano letters.

[5]  Michael Grätzel,et al.  Recent advances in sensitized mesoscopic solar cells. , 2009, Accounts of chemical research.

[6]  Seth B Darling,et al.  Improved hybrid solar cells via in situ UV polymerization. , 2009, Small.

[7]  Bin Liu,et al.  Highly Efficient Nanoporous TiO2‐Polythiophene Hybrid Solar Cells Based on Interfacial Modification Using a Metal‐Free Organic Dye , 2009 .

[8]  A. Walker,et al.  Dye-sensitized solar cells based on oriented TiO2 nanotube arrays: transport, trapping, and transfer of electrons. , 2008, Journal of the American Chemical Society.

[9]  Bin Liu,et al.  Improved adhesion of interconnected TiO2 nanofiber network on conductive substrate and its application in polymer photovoltaic devices , 2008 .

[10]  Niyazi Serdar Sariciftci,et al.  Hybrid solar cells , 2008 .

[11]  Taeghwan Hyeon,et al.  Nanorod‐Based Dye‐Sensitized Solar Cells with Improved Charge Collection Efficiency , 2008 .

[12]  F. Claeyssens,et al.  Characterization of solid-state dye-sensitized solar cells utilizing high absorption coefficient metal-free organic dyes. , 2008, Journal of the American Chemical Society.

[13]  S. Ramakrishna,et al.  Structural and Optical Properties of Electrospun TiO2 Nanofibers , 2007 .

[14]  A. J. Frank,et al.  Removing structural disorder from oriented TiO2 nanotube arrays: reducing the dimensionality of transport and recombination in dye-sensitized solar cells. , 2007, Nano letters.

[15]  Michael Grätzel,et al.  Electron and Hole Transport through Mesoporous TiO2 Infiltrated with Spiro‐MeOTAD , 2007 .

[16]  Craig A Grimes,et al.  Self-assembled hybrid polymer-TiO2 nanotube array heterojunction solar cells. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[17]  Laurence M. Peter,et al.  A Reappraisal of the Electron Diffusion Length in Solid-State Dye-Sensitized Solar Cells , 2007 .

[18]  C. Grimes,et al.  High efficiency double heterojunction polymer photovoltaic cells using highly ordered TiO2 nanotube arrays , 2007 .

[19]  Klaus Meerholz,et al.  Efficiency enhancements in solid-state hybrid solar cells via reduced charge recombination and increased light capture. , 2007, Nano letters.

[20]  Seeram Ramakrishna,et al.  Spray deposition of electrospun TiO2 nanorods for dye-sensitized solar cell , 2007 .

[21]  Jae Kwan Lee,et al.  Molecular engineering of organic sensitizers for solar cell applications. , 2006, Journal of the American Chemical Society.

[22]  S. Yoshikawa,et al.  Synthesis, characterization, photocatalytic activity and dye-sensitized solar cell performance of nanorods/nanoparticles TiO2 with mesoporous structure , 2006 .

[23]  Bing Tan,et al.  Dye-sensitized solar cells based on anatase TiO2 nanoparticle/nanowire composites. , 2006, The journal of physical chemistry. B.

[24]  Younan Xia,et al.  Electrospinning: A Simple and Versatile Technique for Producing Ceramic Nanofibers and Nanotubes , 2006 .

[25]  Haoshen Zhou,et al.  Highly efficient dye-sensitized solar cells composed of mesoporous titanium dioxide , 2006 .

[26]  Guido Viscardi,et al.  Combined experimental and DFT-TDDFT computational study of photoelectrochemical cell ruthenium sensitizers. , 2005, Journal of the American Chemical Society.

[27]  Ladislav Kavan,et al.  Organized mesoporous TiO2 films exhibiting greatly enhanced performance in dye-sensitized solar cells. , 2005, Nano letters.

[28]  Hidetoshi Miura,et al.  Organic Dye for Highly Efficient Solid‐State Dye‐Sensitized Solar Cells , 2005 .

[29]  A. Walker,et al.  Grain morphology and trapping effects on electron transport in dye-sensitized nanocrystalline solar cells. , 2005, The journal of physical chemistry. B.

[30]  Michael Grätzel,et al.  Efficiency improvement in solid-state-dye-sensitized photovoltaics with an amphiphilic Ruthenium-dye , 2005 .

[31]  Kurt D. Benkstein,et al.  Influence of the percolation network geometry on electron transport in dye-sensitized titanium dioxide solar cells , 2003 .

[32]  Michael Grätzel,et al.  Charge transport and back reaction in solid-state dye-sensitized solar cells: A study using intensity-modulated photovoltage and photocurrent spectroscopy , 2003 .

[33]  Yunzhi Liu,et al.  Infiltrating Semiconducting Polymers into Self‐Assembled Mesoporous Titania Films for Photovoltaic Applications , 2003 .

[34]  Younan Xia,et al.  Fabrication of Titania Nanofibers by Electrospinning , 2003 .

[35]  Yude Wang,et al.  Neutral templating route to mesoporous structured TiO2 , 2002 .

[36]  Kurt D. Benkstein,et al.  Relation between Particle Coordination Number and Porosity in Nanoparticle Films: Implications to Dye-Sensitized Solar Cells , 2001 .

[37]  Arthur J. Frank,et al.  Nonthermalized Electron Transport in Dye-Sensitized Nanocrystalline TiO2 Films: Transient Photocurrent and Random-Walk Modeling Studies , 2001 .

[38]  Bradley F. Chmelka,et al.  Block Copolymer Templating Syntheses of Mesoporous Metal Oxides with Large Ordering Lengths and Semicrystalline Framework , 1999 .

[39]  Yunfeng Lu,et al.  Evaporation-Induced Self-Assembly: Nanostructures Made Easy** , 1999 .

[40]  Josef Salbeck,et al.  Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies , 1998, Nature.

[41]  Ladislav Kavan,et al.  Highly efficient semiconducting TiO2 photoelectrodes prepared by aerosol pyrolysis , 1995 .

[42]  Y. Yue,et al.  Synthesis of mesoporous TiO2 with a crystalline framework , 2000 .