Design and dynamics of a 3-DOF flexure-based parallel mechanism for micro/nano manipulation

[1]  J. Paros.  How to design flexure hinges , 1965 .

[2]  John J. Craig,et al.  Introduction to Robotics Mechanics and Control , 1986 .

[3]  D. K. Bowen,et al.  Design and assessment of monolithic high precision translation mechanisms , 1987 .

[4]  Mitsuo Goto,et al.  A laser tracking robot‐performance calibration system using ball‐seated bearing mechanisms and a spherically shaped cat’s‐eye retroreflector , 1994 .

[5]  Bijan Shirinzadeh.  CAD-based design and analysis system for reconfigurable fixtures in robotic assembly , 1994 .

[6]  Bijan Shirinzadeh.  Flexible and automated workholding systems , 1995 .

[7]  Bijan Shirinzadeh,et al.  A CAD-Based hierarchical approach to interference detection among fixture modules in a reconfigurable fixturing system , 1996 .

[8]  Robert J. Hocken,et al.  X-ray calibrated tunneling system utilizing a dimensionally stable nanometer positioner , 1996 .

[9]  Kee S. Moon,et al.  Optimal design of a flexure hinge based XYφ wafer stage , 1997 .

[10]  Stuart T. Smith,et al.  ELLIPTICAL FLEXURE HINGES , 1997 .

[11]  Bijan Shirinzadeh.  Laser‐interferometry‐based tracking for dynamic measurements , 1998 .

[12]  P. Gao,et al.  A six-degree-of-freedom micro-manipulator based on piezoelectric translators , 1999 .

[13]  David L. Trumper,et al.  Design of a rotary fast tool servo for ophthalmic lens fabrication , 1999 .

[14]  Michael Goldfarb,et al.  A compliant-mechanism-based three degree-of-freedom manipulator for small-scale manipulation , 2000, Robotica.

[15]  Yongling Shen,et al.  Dynamic analysis of reconfigurable fixture construction by a manipulator , 2001 .

[16]  Yongsheng Gao,et al.  Dynamic Modeling of a Novel Workpiece Table for Active Surface Grinding Control , 2001 .

[17]  Nicolae Lobontiu,et al.  Design of Circular Cross-Section Corner-Filleted Flexure Hinges for Three-Dimensional Compliant Mechanisms , 2002 .

[18]  Nicolae Lobontiu,et al.  Parabolic and hyperbolic flexure hinges: flexibility, motion precision and stress characterization based on compliance closed-form equations , 2002 .

[19]  Y. Tseytlin.  Notch flexure hinges: An effective theory , 2002 .

[20]  Wei Zhao,et al.  The constant-Jacobian method for kinematics of a three-DOF planar micro-motion stage , 2002, J. Field Robotics.

[21]  Bijan Shirinzadeh,et al.  The measurement uncertainties in the laser interferometry-based sensing and tracking technique , 2002 .

[22]  V. Altuzar,et al.  Atmospheric pollution profiles in Mexico City in two different seasons , 2003 .

[23]  Il Hong Suh,et al.  Design and experiment of a 3-DOF parallel micromechanism utilizing flexure hinges , 2002, IEEE Trans. Robotics Autom..

[24]  Martin L. Culpepper,et al.  Design of a low-cost nano-manipulator which utilizes a monolithic, spatial compliant mechanism , 2004 .

[25]  Tien-Fu Lu,et al.  A three-DOF compliant micromotion stage with flexure hinges , 2004, Ind. Robot.

[26]  Rong-Fong Fung,et al.  Precision position control using combined piezo-VCM actuators , 2005 .

[27]  Bijan Shirinzadeh,et al.  Enhanced stiffness modeling, identification and characterization for robot manipulators , 2005, IEEE Transactions on Robotics.

[28]  Jae Jong Lee,et al.  Passive compliant wafer stage for single-step nano-imprint lithography , 2005 .

[29]  Shuichi Dejima,et al.  Dynamic modeling, controller design and experimental validation of a planar motion stage for precision positioning , 2005 .

[30]  Gary M. Bone,et al.  Design and control of a dual-stage feed drive , 2005 .

[31]  Bijan Shirinzadeh,et al.  A systematic technique to estimate positioning errors for robot accuracy improvement using laser interferometry based sensing , 2005 .

[32]  A.M. Dollar,et al.  A robust compliant grasper via shape deposition manufacturing , 2006, IEEE/ASME Transactions on Mechatronics.

[33]  Yanling Tian,et al.  Investigation of a 3-DOF micro-positioning table for surface grinding , 2006 .

[34]  Bijan Shirinzadeh,et al.  Enhanced sliding mode motion tracking control of piezoelectric actuators , 2007 .

[35]  Martin L. Culpepper,et al.  A dual-purpose positioner-fixture for precision six-axis positioning and precision fixturing: Part I. Modeling and design , 2007 .

[36]  Martin L. Culpepper,et al.  A dual-purpose positioner-fixture for precision six-axis positioning and precision fixturing: Part II. Characterization and calibration , 2007 .

[37]  Placid Mathew Ferreira,et al.  Design analysis, fabrication and testing of a parallel-kinematic micropositioning XY stage , 2007 .

[38]  Bijan Shirinzadeh,et al.  Robust generalised impedance control of piezo-actuated flexure-based four-bar mechanisms for micro/nano manipulation , 2008 .

[39]  Bijan Shirinzadeh,et al.  Robust motion tracking control of piezo-driven flexure-based four-bar mechanism for micro/nano manipulation , 2008 .

[40]  Wen-Yuh Jywe,et al.  Precision tracking control of a piezoelectric-actuated system , 2008 .

[41]  Bijan Shirinzadeh,et al.  Enhanced adaptive motion tracking control of piezo-actuated flexure-based four-bar mechanisms for micro/nano manipulation , 2008 .

[42]  Yanling Tian,et al.  Dynamic modelling of the fidelity of random surface measurement by the stylus method , 2009 .

[43]  Bijan Shirinzadeh,et al.  Development of a high precision flexure-based microgripper , 2009 .

[44]  Gursel Alici,et al.  Development and dynamic modelling of a flexure-based Scott-Russell mechanism for nano-manipulation , 2009 .

[45]  Yanling Tian,et al.  A flexure-based mechanism and control methodology for ultra-precision turning operation , 2009 .