论文信息 - On 3-D inelastic analysis methods for hot section components (base program)

On 3-D inelastic analysis methods for hot section components (base program)

A 3-D inelastic analysis methods program consists of a series of computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of combustor liners, turbine blades, and turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain) and global (dynamics, buckling) structural behavior of the three selected components. These models are used to solve 3-D inelastic problems using linear approximations in the sense that stresses/strains and temperatures in generic modeling regions are linear functions of the spatial coordinates, and solution increments for load, temperature and/or time are extrapolated linearly from previous information. Three linear formulation computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (MARC-Hot Section Technology), and BEST (Boundary Element Stress Technology), were developed and are described.

R. B. Wilson | P. K. Banerjee | M. J. Bak | S. Nakazawa

[1] T. Belytschko,et al. A stabilization procedure for the quadrilateral plate element with one-point quadrature , 1983 .

[2] Leonard R. Herrmann,et al. Finite-Element Bending Analysis for Plates , 1967 .

[3] J. Nagtegaal,et al. Some computational aspects of elastic-plastic large strain analysis , 1981 .

[4] STABILITY AND CONVERGENCE OF UNDERINTEGRATED FINITE ELEMENT APPROXIMATIONS. , 1984 .

[5] David M. Barnett,et al. The precise evaluation of derivatives of the anisotropic elastic Green's functions , 1972 .

[6] J. C. Simo,et al. On the Variational Foundations of Assumed Strain Methods , 1986 .

[7] W. Sharpe,et al. Benchmark notch test for life prediction , 1982 .

[8] O. C. Zienkiewicz,et al. On variational formulation and its modifications for numerical solution , 1984 .

[9] Y. P. Chiu,et al. On the Stress Field Due to Initial Strains in a Cuboid Surrounded by an Infinite Elastic Space , 1977 .

[10] M. A. Crisfield,et al. An iterative improvement for non‐conforming bending elements , 1975 .

[11] J. N. Reddy,et al. Note on an approximate method for computing consistent conjugate stresses in elastic finite elements , 1973 .

[12] Ivo Babuška,et al. The post-processing approach in the finite element method—part 1: Calculation of displacements, stresses and other higher derivatives of the displacements , 1984 .

[13] L. E. Malvern. Introduction to the mechanics of a continuous medium , 1969 .