Evaluation of 3d-Printed Magnetic Materials for Additively-Manufactured Electrical Machines

[1]  P. Sergeant,et al.  Metal Additive Manufacturing for Electrical Machines: Technology Review and Latest Advancements , 2022, Energies.

[2]  P. Folgarait,et al.  Properties of Additively Manufactured Electric Steel Powder Cores with Increased Si Content , 2021, Materials.

[3]  Gurminder Singh,et al.  Copper extrusion 3D printing using metal injection moulding feedstock: Analysis of process parameters for green density and surface roughness optimization , 2020 .

[4]  J. Keller,et al.  Additive manufacturing of soft magnets for electrical machines—a review , 2020 .

[5]  Ants Kallaste,et al.  Robust Design Optimization and Emerging Technologies for Electrical Machines: Challenges and Open Problems , 2020, Applied Sciences.

[6]  Ahmed Selema.  Development of a Three-Phase Dual-Rotor Magnetless Flux Switching Generator for Low Power Wind Turbines , 2020, IEEE Transactions on Energy Conversion.

[7]  V. Rallabandi,et al.  Evaluating the Effects of Electric and Magnetic Loading on the Performance of Single- and Double-Rotor Axial-Flux PM Machines , 2020, IEEE Transactions on Industry Applications.

[8]  J. Kruth,et al.  Influence of selective laser melting process parameters on texture evolution in pure copper , 2019, Journal of Materials Processing Technology.

[9]  Peter Sergeant,et al.  Multiphysics Analysis of a Stator Construction Method in Yokeless and Segmented Armature Axial Flux PM Machines , 2019, IEEE Transactions on Energy Conversion.

[10]  Abdalla Hussein Mohamed,et al.  A 3D Dynamic Lumped Parameter Thermal Network of Air-Cooled YASA Axial Flux Permanent Magnet Synchronous Machine , 2018 .

[11]  A. Tünnermann,et al.  Selective laser melting of copper using ultrashort laser pulses , 2017 .

[12]  Hajime Igarashi,et al.  Topology Optimization Method Based on On–Off Method and Level Set Approach , 2014, IEEE Transactions on Magnetics.

[13]  P. Sergeant,et al.  Evaluation of a Simple Lamination Stacking Method for the Teeth of an Axial Flux Permanent-Magnet Synchronous Machine With Concentrated Stator Windings , 2012, IEEE Transactions on Magnetics.

[14]  S. Zurek,et al.  A Method for Defining the Mean Path Length of the Epstein Frame , 2007, IEEE Transactions on Magnetics.

[15]  P. Sergeant,et al.  Additively-Manufactured Ultra-Light Shaped-Profile Windings for HF Electrical Machines and Weight-Sensitive Applications , 2022, IEEE Transactions on Transportation Electrification.

[16]  S. Khalilpourazary.  The effect of the ECAP process on the copper micro gears produced by the forward micro-extrusion process , 2021 .

[17]  D. Goll,et al.  Additive manufacturing of soft and hard magnetic materials , 2020 .