Correlation between proton dynamics and line edge roughness in chemically amplified resist for post-optical lithography

In chemically amplified (CA) resists for electron beam (EB) and extreme ultraviolet (EUV) lithographies, acids (a pair of proton and counteranion) generated upon exposure are utilized for resist pattern formation. As protons and counteranions are separately generated during the exposure, they initially have different spatial distributions. In this work, the authors investigated the effects of proton dynamics during the recombination between protons and counteranions and subsequent acid diffusion during postexposure bake on the line edge roughness (LER) formation of the latent image. The proton dynamics and acid diffusion were simulated by a Monte Carlo technique based on diffusion under Coulomb potential induced by many-body charged species. Based on the results shown here, the correlation between the linewidth and LER as a function of exposure dose and the concentration of base additives are discussed in terms of proton and acid trajectories. The obtained aspects not only provide detailed insight into th...

[1]  Shigeru Moriya,et al.  Study of the acid-diffusion effect on line edge roughness using the edge roughness evaluation method , 2002 .

[2]  Hiroki Yamamoto,et al.  Proton Dynamics in Chemically Amplified Electron Beam Resists , 2004 .

[3]  Hiroki Yamamoto,et al.  Proton and anion distribution and line edge roughness of chemically amplified electron beam resist , 2005 .

[4]  Hiroki Yamamoto,et al.  Study on acid generation from polymer , 2005 .

[5]  Evangelos Gogolides,et al.  Effects of Photoresist Polymer Molecular Weight and Acid-Diffusion on Line-Edge Roughness , 2005 .

[6]  Study on radiation-induced reaction in microscopic region for basic understanding of electron beam patterning in lithographic process (II) relation between resist space resolution and space distribution of ionic species , 2001, Digest of Papers. Microprocesses and Nanotechnology 2001. 2001 International Microprocesses and Nanotechnology Conference (IEEE Cat. No.01EX468).

[7]  Bryan J. Rice,et al.  Sources of line-width roughness for EUV resists , 2004, SPIE Advanced Lithography.

[8]  Takahiro Kozawa,et al.  Radiation-induced reactions of chemically amplified x-ray and electron-beam resists based on deprotection of t-butoxycarbonyl groups , 1997 .

[9]  H. Namatsu,et al.  Line-Edge Roughness: Characterization and Material Origin , 2002, 2002 International Microprocesses and Nanotechnology Conference, 2002. Digest of Papers..

[10]  Adam R. Pawloski,et al.  The effects of chemical gradients and photoresist composition on lithographically generated line edge roughness , 2005, SPIE Advanced Lithography.

[11]  S. Tagawa,et al.  Line edge roughness of a latent image in post-optical lithography. , 2006, Nanotechnology.

[12]  Takahiro Kozawa,et al.  Radiation and photochemistry of onium salt acid generators in chemically amplified resists , 2000, Advanced Lithography.

[13]  S. Tagawa,et al.  Modeling and simulation of chemically amplified electron beam, x-ray, and EUV resist processes , 2004 .

[14]  S. Tagawa,et al.  Subpicosecond Pulse Radiolysis Study of Geminate Ion Recombination in Liquid Benzene , 2003 .

[15]  Hideo Namatsu,et al.  Influence of molecular weight of resist polymers on surface roughness and line-edge roughness , 2004 .

[16]  Martha I. Sanchez,et al.  Extendibility of chemically amplified resists: another brick wall? , 2003, SPIE Advanced Lithography.

[17]  Shinji Okazaki,et al.  Nanometer-Scale Imaging Characteristics of Novolak Resin-Based Chemical Amplification Negative Resist Systems and Molecular-Weight Distribution Effects of the Resin Matrix , 1994 .

[18]  Takahiro Kozawa,et al.  Relation between spatial resolution and reaction mechanism of chemically amplified resists for electron beam lithography , 2003 .

[19]  C. Willson,et al.  Chemical amplification in the design of dry developing resist materials , 1983 .

[20]  Martha I. Sanchez,et al.  Chemical and physical aspects of the post-exposure baking process used for positive-tone chemically amplified resists , 2001, IBM J. Res. Dev..

[21]  Toshiro Itani,et al.  Photoacid bulkiness effect on dissolution kinetics in chemically amplified deep ultraviolet resists , 1995 .

[22]  S. Tagawa,et al.  Study on radiation-induced reaction in microscopic region for basic understanding of electron beam patterning in lithographic process (I) - Development of subpicosecond pulse radiolysis and relation between space resolution and radiation-induced reactions of onium salt , 2001, Digest of Papers. Microprocesses and Nanotechnology 2001. 2001 International Microprocesses and Nanotechnology Conference (IEEE Cat. No.01EX468).

[23]  S. Tagawa,et al.  Multi spur effect on decay kinetics of geminate ion recombination using Monte Carlo technique , 2005 .

[24]  C. Grant Willson,et al.  Understanding molecular-level effects during post-exposure processing , 2001, SPIE Advanced Lithography.

[25]  James W. Taylor,et al.  Factors contributing to sidewall roughness in a positive-tone, chemically amplified resist exposed by x-ray lithography , 1999 .

[26]  Takahiro Matsuo,et al.  Reduction of line edge roughness in the top surface imaging process , 1998 .

[27]  Hiroshi Ito.  Chemical amplification resists for microlithography , 2005 .

[28]  Koji Asakawa,et al.  Mechanism of amine additive in chemically amplified resist visualized by using Monte Carlo simulation , 1995, Advanced Lithography.

[29]  M. Inokuti.  Ionization yields in gases under electron irradiation. , 1975, Radiation research.

[30]  Shinji Okazaki,et al.  Correlation of Nano Edge Roughness in Resist Patterns with Base Polymers , 1993 .

[31]  F. Cerrina,et al.  Process dependence of roughness in a positive-tone chemically amplified resist , 1998 .

[32]  Takahiro Kozawa,et al.  Radiation-Induced Acid Generation Reactions in Chemically Amplified Resists for Electron Beam and X-Ray Lithography , 1992 .

[33]  P. Kruit,et al.  Local critical dimension variation from shot-noise related line edge roughness , 2005 .

[34]  M. Kotera,et al.  Dependence of linewidth and its edge roughness on electron beam exposure dose , 2005 .

[35]  Shinji Okazaki,et al.  Nano edge roughness in polymer resist patterns , 1993 .

[36]  H. Namatsu,et al.  Effect of developer molecular size on roughness of dissolution front in electron-beam resist , 2004 .

[37]  Hiroki Yamamoto,et al.  Potential Cause of Inhomogeneous Acid Distribution in Chemically Amplified Resists for Post Optical Lithography , 2005 .

[38]  Shazia Yasin,et al.  Influence of polymer phase separation on roughness of resist features , 2004 .

[39]  Josée Brisson,et al.  Hydrogen bonds in poly(methyl methacrylate)-poly(4-vinyl phenol) blends: 1. Quantitative analysis using FTi.r. spectroscopy , 1998 .

[40]  N. Saito,et al.  Photon W-value for Ar in the sub-keV X-ray region , 2001 .

[41]  Effects of Dielectric Constant on Acid Generation in Chemically Amplified Resists for Post-Optical Lithography , 2005 .