Waste Slags as Sustainable Construction Materials: A Compressive Review on Physico Mechanical Properties

[1]  R. Fediuk,et al.  Experimental effect of pre-treatment of rubber fibers on mechanical properties of rubberized concrete , 2023, Journal of Materials Research and Technology.

[2]  R. Garg,et al.  Mechanical strength and durability analysis of mortars prepared with fly ash and nano-metakaolin , 2022, Case Studies in Construction Materials.

[3]  A. Deifalla,et al.  Feasibility Study on Concrete Made with Substitution of Quarry Dust: A Review , 2022, Sustainability.

[4]  Pervez Alam,et al.  A review on material mix proportion and strength influence parameters of geopolymer concrete: Application of ANN model for GPC strength prediction , 2022, Construction and Building Materials.

[5]  Nuha Salim Mashaan,et al.  Properties and Applications of Geopolymer Composites: A Review Study of Mechanical and Microstructural Properties , 2022, Materials.

[6]  Krešimir Maldini,et al.  Recycling Electric Arc Furnace Slag into Fertilizer: Effects of “Waste Product” on Growth and Physiology of the Common Bean (Phaseolus vulgaris L.) , 2022, Agronomy.

[7]  Hasan Assaedi,et al.  Impact of nano-alumina on the mechanical characterization of PVA fibre-reinforced geopolymer composites , 2022, Journal of Taibah University for Science.

[8]  H. Mehboob,et al.  Experimental Evaluation of Industrial Mushroom Waste Substrate Using Hybrid Mechanism of Vermicomposting and Effective Microorganisms , 2022, Materials.

[9]  A. Alqarni,et al.  Development of Eco-Friendly Concrete Mix Using Recycled Aggregates: Structural Performance and Pore Feature Study Using Image Analysis , 2022, Materials.

[10]  Bassam A. Tayeh,et al.  Possibilities for the application of agro-industrial wastes in cementitious materials: A brief review of the Brazilian perspective , 2022, Cleaner Materials.

[11]  J. Pu,et al.  Geotechnical Behaviour of Fly Ash–Bentonite Used in Layers , 2022, Applied Sciences.

[12]  J. A. Polanco,et al.  Durability of high-performance self-compacted concrete using electric arc furnace slag aggregate and cupola slag powder , 2022, Cement and Concrete Composites.

[13]  C. A. Saleel,et al.  Shrinkage Study and Strength Aspects of Concrete with Foundry Sand and Coconut Shell as a Partial Replacement for Coarse and Fine Aggregate , 2021, Materials.

[14]  A. Afzal,et al.  Influence of Heat Treatment and Reinforcements on Tensile Characteristics of Aluminium AA 5083/Silicon Carbide/Fly Ash Composites , 2021, Materials.

[15]  A. Afzal,et al.  Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC , 2021, Materials.

[16]  V. Markine,et al.  Analysis of furnace slag in railway sub-ballast based on experimental tests and DEM simulations , 2021, Construction and Building Materials.

[17]  S. Monteiro,et al.  Clay Ceramic Waste as Pozzolan Constituent in Cement for Structural Concrete , 2021, Materials.

[18]  Seyed Saeid Rahimian Koloor,et al.  Strength and flexural behavior of steel fiber and silica fume incorporated self-compacting concrete , 2021 .

[19]  O. Olofinnade,et al.  Solid waste management in developing countries: Reusing of steel slag aggregate in eco-friendly interlocking concrete paving blocks production , 2021, Case Studies in Construction Materials.

[20]  Peng-mao Liu,et al.  Application investigation of high-phosphorus steel slag in cementitious material and ordinary concrete , 2021 .

[21]  Baoju Liu,et al.  Experimental study on full-volume slag alkali-activated mortars: Air-cooled blast furnace slag versus machine-made sand as fine aggregates. , 2021, Journal of hazardous materials.

[22]  M. Ramli,et al.  Engineering and gamma-ray attenuation properties of steel furnace slag heavyweight concrete with nano calcium carbonate and silica , 2021, Construction and Building Materials.

[23]  J.P. Oliveira,et al.  Use of air-cooled blast furnace slag as supplementary cementitious material for self-compacting concrete production , 2020 .

[24]  A. Qi,et al.  Bond behavior of steel reinforcement in concrete containing ferronickel slag and blast furnace slag powder , 2020 .

[25]  A. Mohan,et al.  Characterization of mechanical properties by preferential supplant of cement with GGBS and silica fume in concrete , 2020 .

[26]  Jinfeng Sun,et al.  Microstructure and mechanical properties of CO2-cured steel slag brick in pilot-scale , 2020 .

[27]  Yujing Zhao,et al.  Properties of pervious concrete with steel slag as aggregates and different mineral admixtures as binders , 2020 .

[28]  A. Gholampour,et al.  Development of waste-based concretes containing foundry sand, recycled fine aggregate, ground granulated blast furnace slag and fly ash , 2020 .

[29]  Hasan Assaedi,et al.  Characterization and potential applications of different powder volcanic ash , 2020 .

[30]  W. Ni,et al.  Green concrete with ground granulated blast-furnace slag activated by desulfurization gypsum and electric arc furnace reducing slag , 2020 .

[31]  Joshua O. Ighalo,et al.  Development of high-performance self compacting concrete using eggshell powder and blast furnace slag as partial cement replacement , 2020 .

[32]  M. Nooman,et al.  Influence of nano-blast furnace slag on microstructure, mechanical and corrosion characteristics of concrete , 2020 .

[33]  P. Dhevasenaa,et al.  Partial replacement of fine aggregate by steel slag and coarse aggregate by walnut shell in concrete , 2020 .

[34]  S. Foster,et al.  Development of high-density geopolymer concrete with steel furnace slag aggregate for coastal protection structures , 2020 .

[35]  M. Ramli,et al.  Physicomechanical and gamma-ray shielding properties of high-strength heavyweight concrete containing steel furnace slag aggregate , 2020 .

[36]  Richa Palod,et al.  Effect on mechanical performance, early age shrinkage and electrical resistivity of ternary blended concrete containing blast furnace slag and steel slag , 2020 .

[37]  Xiaofeng Yang,et al.  Effect of granulated blast furnace slag on the self-healing capability of mortar incorporating crystalline admixture , 2020 .

[38]  Shaswat Kumar Das,et al.  Characterization and utilization of rice husk ash (RHA) in fly ash – Blast furnace slag based geopolymer concrete for sustainable future , 2020 .

[39]  A. Azevedo,et al.  Development of mortar for laying and coating with pineapple fibers , 2020, Revista Brasileira de Engenharia Agrícola e Ambiental.

[40]  M. Ismail,et al.  Properties of concrete containing electric arc furnace steel slag and steel sludge , 2020 .

[41]  Seksan Papong,et al.  The potential of industrial waste: using foundry sand with fly ash and electric arc furnace slag for geopolymer brick production , 2020, Heliyon.

[42]  J. M. Manso,et al.  The study of properties and behavior of self compacting concrete containing Electric Arc Furnace Slag (EAFS) as aggregate , 2020 .

[43]  Jeffrey Mahachi,et al.  Behaviour of ground cupola furnace slag blended concrete at elevated temperature , 2020 .

[44]  J. A. Polanco,et al.  High Performance Self-Compacting Concrete with Electric Arc Furnace Slag Aggregate and Cupola Slag Powder , 2020, Applied Sciences.

[45]  Yamei Zhang,et al.  The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar , 2019 .

[46]  C. Hwang,et al.  Performance evaluation of alkali activated mortar containing high volume of waste brick powder blended with ground granulated blast furnace slag cured at ambient temperature , 2019, Construction and Building Materials.

[47]  S. Cavalaro,et al.  Durability of concrete with electric arc furnace slag aggregate , 2019, Construction and Building Materials.

[48]  Fazhou Wang,et al.  Utilization of steel slag in ultra-high performance concrete with enhanced eco-friendliness , 2019, Construction and Building Materials.

[49]  R. Sedghi,et al.  Effect of electric arc furnace steel slag on the mechanical and fracture properties of roller-compacted concrete , 2019, Construction and Building Materials.

[50]  J. M. Álvarez,et al.  Performance and durability properties of self-compacting mortars with electric arc furnace dust as filler , 2019, Journal of Cleaner Production.

[51]  A. Khalak.  Experimental Analysis on Cupola Slag Waste as a Partially Replacement in Coarse Aggregate in Concrete , 2019, International Journal for Research in Applied Science and Engineering Technology.

[52]  Jianhe Xie,et al.  Utilization of unprocessed steel slag as fine aggregate in normal- and high-strength concrete , 2019, Construction and Building Materials.

[53]  J. Brito,et al.  Safe use of electric arc furnace dust as secondary raw material in self-compacting mortars production , 2019, Journal of Cleaner Production.

[54]  W. Yeih,et al.  The influences of cement type and curing condition on properties of pervious concrete made with electric arc furnace slag as aggregates , 2019, Construction and Building Materials.

[55]  Saravut Jaritngam,et al.  Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash , 2018, Construction and Building Materials.

[56]  K. Jiao,et al.  Corrosion behavior of alumina-carbon composite brick in typical blast furnace slag and iron , 2018, Ceramics International.

[57]  Sitaram Nayak,et al.  Utilization of granulated blast furnace slag and cement in the manufacture of compressed stabilized earth blocks , 2018 .

[58]  M. Ozturk,et al.  Experimental work on mechanical, electromagnetic and microwave shielding effectiveness properties of mortar containing electric arc furnace slag , 2018 .

[59]  Beatriz Leão Evangelista,et al.  Life cycle assessment of concrete paving blocks using electric arc furnace slag as natural coarse aggregate substitute , 2018 .

[60]  Bibhuti Bhusan Mukharjee,et al.  Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag , 2018 .

[61]  Carlo Pellegrino,et al.  Cementing efficiency of electric arc furnace dust in mortars , 2017 .

[62]  Q. Bui,et al.  An assessment on volume stabilization of mortar with stainless steel slag sand , 2017 .

[63]  Michel Mouret,et al.  Mechanical and durability characteristics of High Performance Concrete containing steel slag and crystalized slag as aggregates , 2017 .

[64]  Irune Indacoechea-Vega,et al.  Analysis of the use of cupola furnace slags, green sand and reclaimed asphalt pavement in asphalt concrete mixtures for low intensity traffic , 2017 .

[65]  E. F. Ledesma,et al.  Experimental study of the mechanical stabilization of electric arc furnace dust using fluid cement mortars. , 2017, Journal of hazardous materials.

[66]  M. Skaf,et al.  Self-compacting concrete incorporating electric arc-furnace steelmaking slag as aggregate , 2017 .

[67]  Stephen J. Foster,et al.  Utilisation of steel furnace slag coarse aggregate in a low calcium fly ash geopolymer concrete , 2016 .

[68]  J. Oh,et al.  Production of price-competitive bricks using a high volume of stone powder sludge waste and blast furnace slag through cementless CaO activation , 2016 .

[69]  I. Janotka,et al.  One-year properties of concrete with partial substitution of natural aggregate by cupola foundry slag , 2016 .

[70]  C. Qian,et al.  The properties and mechanism of microbial mineralized steel slag bricks , 2016 .

[71]  Faiz Shaikh,et al.  Characterizations of flax fabric reinforced nanoclay-geopolymer composites , 2016 .

[72]  Amaia Santamaría,et al.  The use of steelmaking slags and fly ash in structural mortars , 2016 .

[73]  Enrique Hernández-Montes,et al.  High performance concrete with electric arc furnace slag as aggregate: Mechanical and durability properties , 2015 .

[74]  Weichung Yeih,et al.  Properties of pervious concrete made with air-cooling electric arc furnace slag as aggregates , 2015 .

[75]  Quan-bing Yang,et al.  The properties of the carbonated brick made of steel slag-slaked lime mixture , 2015, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[76]  Afonso Rangel Garcez de Azevedo,et al.  Environmental Durability of Soil-Cement Block Incorporated with Ornamental Stone Waste , 2014 .

[77]  Dawei Zhao,et al.  Preparation of Slag Wool by Integrated Waste-Heat Recovery and Resource Recycling of Molten Blast Furnace Slags: From Fundamental to Industrial Application , 2014 .

[78]  J. O. Afolayan,et al.  Investigation on the Potentials of Cupola Furnace Slag in Concrete , 2013 .

[79]  Rahul V. Ralegaonkar,et al.  Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks , 2011 .

[80]  Bassam A. Tayeh,et al.  Recycling of mine tailings for the geopolymers production: A systematic review , 2022, Case Studies in Construction Materials.

[81]  Khalid Al-Ali,et al.  Development of an electric arc furnace steel slag-based ceramic material for high temperature thermal energy storage applications , 2022, Journal of Energy Storage.

[82]  Bassam A. Tayeh,et al.  Effect of air agent on mechanical properties and microstructure of lightweight geopolymer concrete under high temperature , 2022, Case Studies in Construction Materials.

[83]  M. Iliescu,et al.  Influence of Blast Furnace Slag on the Durability Characteristic of Road Concrete Such as Freeze-Thaw Resistance , 2020 .

[84]  Chan Yu,et al.  An overview of resource utilization of steel slag as absorbent material for waste water treatment , 2020, E3S Web of Conferences.

[85]  C. Srinivasarao,et al.  Study of standard grade concrete consisting of granulated blast furnace slag as a fine aggregate , 2020 .

[86]  Bassam A. Tayeh,et al.  Durability and strength characteristics of high-strength concrete incorporated with volcanic pumice powder and polypropylene fibers , 2020 .

[87]  P. Sanket,et al.  Experimental Study on Mechanical Properties of Hardened Concrete using Cupola Slag as Partial Replacement of Cement and Coarse Aggregate , 2018 .

[88]  T. Choong,et al.  Overview of Steel Slag Application and Utilization , 2016 .

[89]  IAEME Publication,et al.  Utilization of Cupola Slag in Concrete as Fine and Coarse Aggregate , 2015 .

[90]  C. Arum,et al.  Partial Replacement of Portland Cement by Granulated Cupola Slag - Sustainable Option for Concrete of Low Permeability , 2014 .

[91]  J. I. Escalante-García,et al.  Cementitious Blends of Portland Cement with Calcium Sulphate, Fly Ash and Cupola Slag. , 2012 .

[92]  A. Pribulova,et al.  Comparison of possibilities the blast furnace and cupola slag utilization by concrete production , 2010 .

[93]  E. Bassey,et al.  Suitability of electric arc furnace (eaf) slag as partial replacement for cement in sandcrete blocks , 2009 .

[94]  D. A. Aderibigbe,et al.  Properties of cupola slag as a pozzolana and its effects on partial replacement of cement in a mortar , 1982 .