Steering Control of the Autonomous Vehicle: CajunBot

This paper describes the steering controller of the CajunBot II, an autonomous vehicle designed for the DARPA Urban Challenge. The autonomous vehicle is a modified Jeep Wrangler Rubicon equipped with INS/GPS for localization, three sets of sensors and three single board computers. The control objective is to make the lateral error at a certain point ahead of the vehicle zero. The distance of this point from the vehicle is called the look-ahead distance. A proportional Integral controller augmented with a moving average filter to dump the yaw internal dynamics is proposed to achieve this objective. The steering controller was tested under full-scale conditions and its dynamic performances are discussed here.

[1]  Jürgen Guldner,et al.  Study of design directions for lateral vehicle control , 1997, Proceedings of the 36th IEEE Conference on Decision and Control.

[2]  Rajesh Rajamani,et al.  Vehicle dynamics and control , 2005 .

[3]  T D Gillespie,et al.  Fundamentals of Vehicle Dynamics , 1992 .

[4]  Cris Koutsougeras,et al.  KAT-5: Robust systems for autonomous vehicle navigation in challenging and unknown terrain , 2006, J. Field Robotics.

[5]  Masayoshi Tomizuka,et al.  A variable look-ahead controller for lateral guidance of four wheeled vehicles , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[6]  Umit Ozguner,et al.  An analytical study of vehicle steering control , 1995, Proceedings of International Conference on Control Applications.

[7]  Guna Seetharaman,et al.  CajunBot: Architecture and algorithms , 2006, J. Field Robotics.

[8]  Han-Shue Tan,et al.  Steering control of high speed vehicles: dynamic look ahead and yaw rate feedback , 1998, Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171).

[9]  Suresh Golconda,et al.  Subgoal-based local navigation and obstacle avoidance using a grid-distance field , 2006 .