Ultrasonic propagation through hydrating cements

Abstract Hydraulic cements develop mechanical strength and low permeability as a result of hydration, which involves chemical reactions between water and the anhydrous compounds present in the cement. Solid hydration products form both at the surfaces of the cement particles and in the pore space by nucleation and aggregation. As a result, the solid phase becomes highly connected and the material transforms from a viscous suspension of irregularly-shaped cement particles into a porous elastic solid with non-vanishing bulk and shear moduli. This transition to an interconnected solid phase is an example of a percolation transition. In this paper, measurements of the velocity of ultrasonic longitudinal and shear waves in ordinary Portland cement undergoing hydration are reported. The cement slurries were prepared in accordance with the American petroleum Institute (API) specification for class G oil-well cement with various additives. After the time at which the cement becomes interconnected, the effective bulk and shear moduli are found to be linearly related and the effective Poisson's ratio is observed to decrease from the value of 0.5, characteristic of a fluid, to values characteristic of a porous elastic solid.

[1]  Peter V. Coveney,et al.  Ultrasonic measurements on hydrating cement slurries: Onset of shear wave propagation , 1995 .

[2]  M. Michaux,et al.  2 Chemistry and Characterization of Portland Cement , 1990 .

[3]  P. Parcevaux,et al.  Pore size distribution of portland cement slurries at very early stages of hydration (influence of curing temperature and pressure) , 1984 .

[4]  A. P. Hibbert,et al.  Comparison of shear modulus and pulse velocity techniques to measure the build-up of structure in fresh cement pastes used in oil well cementing , 1989 .

[5]  M. Biot.  Theory of Propagation of Elastic Waves in a Fluid‐Saturated Porous Solid. I. Low‐Frequency Range , 1956 .

[6]  B. Stimpson,et al.  Ultrasonic propagation in slurries. , 1991, Ultrasonics.

[7]  D. Bergman,et al.  Critical Properties of an Elastic Fractal , 1984 .

[8]  A. H. Harker,et al.  Velocity and attenuation of ultrasound in suspensions of particles in fluids , 1988 .

[9]  A. P. Hibbert,et al.  Correlation between cube strength, ultrasonic pulse velocity and volume change for oil well cement slurries , 1989 .

[10]  T. Plona,et al.  Acoustic slow waves and the consolidation transition , 1982 .

[11]  Phil Rae,et al.  8 Prevention of Annular Gas Migration , 1990 .

[12]  P. P. Rao,et al.  An Ultrasonic Device for Nondestructive Testing of Oilwell Cements at Elevated Temperatures and Pressures , 1982 .

[13]  Robert W. Zimmerman,et al.  The elastic moduli of mortar as a porous-granular material , 1986 .

[14]  W. Ament.  Sound Propagation in Gross Mixtures , 1953 .

[15]  M. Nafi Toksöz,et al.  Velocity and attenuation of seismic waves in two-phase media; Part I, Theoretical formulations , 1974 .

[16]  R. L. Smith,et al.  The propagation of ultrasound in porous media , 1982 .

[17]  R. J. Urick,et al.  A Sound Velocity Method for Determining the Compressibility of Finely Divided Substances , 1947 .

[18]  James G. Berryman,et al.  Confirmation of Biot’s theory , 1980 .

[19]  Paulo J.M. Monteiro,et al.  Experimental studies of elastic wave propagation in high-strength mortar , 1988 .

[20]  T. Plona,et al.  Ultrasonic propagation in close‐packed disordered suspensions , 1984 .