The Influence of Sampling Conditions on the Repeatability of Diesel Particulate and Vapor Phase Hydrocarbon and PAH Measurements

[1]  Susan T. Bagley,et al.  Ceramic Particulate Traps for Diesel Emissions Control - Effects of a Manganese-Copper Fuel Additive , 1988 .

[2]  J. Hornig,et al.  The loss of PAH from quartz fiber high volume filters , 1984 .

[3]  The Effects of a Porous Ceramic Particulate Trap on the Physical, Chemical and Biological Character of Diesel Particulate Emissions , 1983 .

[4]  John H. Johnson,et al.  Investigation into the effect of a ceramic particle trap on the chemical mutagens in diesel exhaust. Research report, July 1983-July 1986 , 1987 .

[5]  John H. Johnson,et al.  Characterization of mutagenic subfractions of diesel exhaust modified by ceramic particulate traps. , 1987, Environmental science & technology.

[6]  H. Vergeer,et al.  Diesel Emissions Reduction by Ceramic Filters Employing Catalysts or a Fuel Additive , 1987 .

[7]  W. May,et al.  Determination of nitro polynuclear aromatic hydrocarbons in air and diesel particulate matter using liquid chromatography with electrochemical and fluorescence detection. , 1988, Analytical chemistry.

[8]  Bernard R. Rosner,et al.  Fundamentals of Biostatistics. , 1992 .

[9]  S. Bagley,et al.  The Effects of Fuels on Diesel Oxidation Catalyst Performance and the Physical, Chemical, and Biological Character of Diesel Particulate Emissions , 1981 .

[10]  A Computer Heat Transfer and Hydrocarbon Adsorption Model for Predicting Diesel Particulate Emissions in Dilution Tunnels , 1982 .

[11]  Impact of a ceramic trap and manganese fuel additive on the biological activity and chemical composition of exhaust particles from diesel engines used in underground mines , 1987 .

[12]  J. Lewtas,et al.  Genotoxicity of complex mixtures: strategies for the identification and comparative assessment of airborne mutagens and carcinogens from combustion sources. , 1988, Fundamental and applied toxicology : official journal of the Society of Toxicology.

[13]  J. Pankow,et al.  Assessment of adsorption/solvent extraction with polyurethane foam and adsorption/thermal desorption with Tenax-GC for the collection and analysis of ambient organic vapors , 1985 .

[14]  T. Gibson.  Nitro derivatives of polynuclear aromatic hydrocarbons in airborne and source particulate matter , 1982 .

[15]  R. Snow,et al.  Trapping Gaseous Hydrocarbons for Mutagenic Testing , 1982 .

[16]  M. J. Evans,et al.  FACTORS AFFECTING THE SAMPLING OF AIRBORNE POLYCYCLIC AROMATIC HYDROCARBONS—A REVIEW , 1986 .

[17]  A. Lindskog,et al.  A comparison between different high volume sampling systems for collecting ambient airborne particles for mutagenicity testing and for analysis of organic compounds. , 1984, The Science of the total environment.

[18]  F. Black,et al.  Sampling Diesel Engine Particle and Artifacts from Nitrogen Oxide Interactions , 1982 .

[19]  R. McClellan,et al.  Diesel exhaust is a pulmonary carcinogen in rats exposed chronically by inhalation. , 1987, Fundamental and applied toxicology : official journal of the Society of Toxicology.

[20]  K. E. Thrane,et al.  Monitoring method for airborne polycyclic aromatic hydrocarbons , 1985 .

[21]  Robert G. Lewis,et al.  Phase distribution and artifact formation in ambient air sampling for polynuclear aromatic hydrocarbons , 1988 .

[22]  Joseph M. Colucci,et al.  Polynuclear Aromatic Hydrocarbon Emissions from Automotive Engines , 1970 .

[23]  D Schuetzle,et al.  Sampling of vehicle emissions for chemical analysis and biological testing. , 1983, Environmental health perspectives.

[24]  H. Miyamoto,et al.  Effects of ambient temperature on aspects of airborne polycyclic aromatic hydrocarbons , 1982 .