Piezoresistive micro-cantilevers are interesting bio-sensing tool whose base resistance value (R) changes by a few parts per million (∆R) in deflected conditions. Measuring such a small deviation is always being a challenge due to noise. An advanced and reliable ∆R/R measurement scheme is presented in this paper which can sense resistance changes down to 6 parts per million. The measurement scheme includes the half-bridge connected micro-cantilevers with mismatch compensation, precision op-amp based filters and amplifiers, and a lock-in amplifier based detector. The input actuating sine wave is applied from a function generator and the output dc voltage is displayed on a digital multimeter. The calibration is performed and instrument sensitivity is calculated. An experimental set-up using a probe station is discussed that demonstrates a combined performance of the measurement system and SU8-polysilicon cantilevers. The deflection sensitivity of such polymeric cantilevers is calculated. The system will be highly useful to detect bio-markers such as myoglobin and troponin that are released in blood during or after heart attacks.
[1]
William Paul King,et al.
The effect of piezoresistive microcantilever geometry on cantilever sensitivity during surface stress chemical sensing
,
2008
.
[2]
Paul Horowitz,et al.
The Art of Electronics
,
1980
.
[3]
Winfield Hill,et al.
The art of electronics - Second edition
,
1989
.
[4]
Fabrication and Characterization of a Polymeric Microcantilever With an Encapsulated Hotwire CVD Polysilicon Piezoresistor
,
2009,
Journal of Microelectromechanical Systems.
[5]
V.R. Rao,et al.
Photoplastic NEMS with an Encapsulated Polysilicon Piezoresistor
,
2008,
2008 8th IEEE Conference on Nanotechnology.