In-situ TEM straining experiments of Al films on polyimide using a novel FIB design for specimen preparation

In-situ transmission electron microscopy (TEM) straining experiments are tedious to perform but give invaluable insight into the deformation processes of materials. With the current interest in mechanical size-effects of nanocrystalline materials and thin metallic films, in-situ tensile testing in the TEM is the key method for identifying underlying deformation mechanisms. In-situ TEM experiments can be significantly simplified using well-designed specimens. The advantages of a novel focussed ion beam design and first in-situ straining results of 500-nm thick single-crystalline Al films on polyimide are reported and compared to conventionally prepared Al films on polyimide.

[1]  A. Couret,et al.  In situ deformation in T.E.M.: recent developments , 1993 .

[2]  Ian M. Robertson,et al.  In situ transmission electron microscopy observations of toughening mechanisms in ultra-fine grained columnar aluminum thin films , 2005 .

[3]  Lucille A. Giannuzzi,et al.  A review of focused ion beam milling techniques for TEM specimen preparation , 1999 .

[4]  M. A. Haque,et al.  In situ tensile testing of nanoscale freestanding thin films inside a transmission electron microscope , 2005 .

[5]  Andrew M. Minor,et al.  Direct observation of deformation-induced grain growth during the nanoindentation of ultrafine-grained Al at room temperature , 2004 .

[6]  E. Arzt.  Size effects in materials due to microstructural and dimensional constraints: a comparative review , 1998 .

[7]  A. Petford-Long,et al.  Preparation of transmission electron microscopy cross-section specimens using focused ion beam milling , 2001 .

[8]  L. Freund.  The Stability of a Dislocation Threading a Strained Layer on a Substrate , 1987 .

[9]  William D. Nix,et al.  Mechanical properties of thin films , 1989 .

[10]  Peter Gumbsch,et al.  Dislocation sources and the flow stress of polycrystalline thin metal films , 2003 .

[11]  F. Boswell,et al.  Mechanical properties of vacuum-deposited metal films II: nickel films , 1974 .

[12]  E. Arzt,et al.  Observation of Dislocation DisAppearance in Aluminum Thin Films and Consequences for Thin Film Properties , 1997 .

[13]  M. Wall,et al.  An in situ nanoindentation specimen holder for a high voltage transmission electron microscope , 1998, Microscopy research and technique.

[14]  S. Hackney,et al.  Local interface response to dislocation strain fields at the Al/SiO2 and Al/C boundary region , 1995 .

[15]  B. Inkson,et al.  Growth and microstructural stability of epitaxial Al films on (0001) α-Al2O3 substrates , 2002 .

[16]  Gerhard Dehm,et al.  In situ TEM observation of dislocation motion in thermally strained Al nanowires , 2002 .

[17]  E. Arzt,et al.  Influence of film/substrate interface structure on plasticity in metal thin films , 2001 .

[18]  Oliver Kraft,et al.  Interface controlled plasticity in metals: dispersion hardening and thin film deformation , 2001 .

[19]  Eduard Arzt,et al.  In situ transmission electron microscopy study of dislocations in a polycrystalline Cu thin film constrained by a substrate , 2000 .