Fatigue life reduction of GFRP composites due to delamination associated with the introduction of functional discontinuities

[1]  F. Aymerich,et al.  Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites , 2019 .

[2]  Giangiacomo Minak,et al.  Improvement of the Impact Properties of Composite Laminates by Means of Nano-Modification of the Matrix—A Review , 2018, Applied Sciences.

[3]  Hossein Hosseini Toudeshky,et al.  Damage evaluation of laminated composite material using a new acoustic emission Lamb-based and finite element techniques , 2018, Applied Composite Materials.

[4]  M. A. Najafabadi,et al.  Considering damages to open-holed composite laminates modified by nanofibers under the three-point bending test , 2018, Polymer Testing.

[5]  M. Wisnom,et al.  Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates , 2018, Composites Part A: Applied Science and Manufacturing.

[6]  M. A. Najafabadi,et al.  Clustering of interlaminar and intralaminar damages in laminated composites under indentation loading using Acoustic Emission , 2018, Composites Part B: Engineering.

[7]  M. Quaresimin,et al.  Damage initiation and evolution in short fiber reinforced polyamide under fatigue loading: Influence of fiber volume fraction , 2017 .

[8]  Michael Philen,et al.  Progressive damage assessment of centrally notched composite specimens in fatigue , 2015 .

[9]  Manouchehr Salehi,et al.  Size dependent free vibration analysis of multicrystalline nanoplates by considering surface effects as well as interface region , 2014 .

[10]  Manouchehr Salehi,et al.  Size-dependent static characteristics of multicrystalline nanoplates by considering surface effects , 2014 .

[11]  H. Heidary,et al.  Online Monitoring of Drilling-Induced Delamination of Composite Materials by Acoustic Emission , 2012 .

[12]  Weilong Cong,et al.  A review of mechanical drilling for composite laminates , 2012 .

[13]  J. Paulo Davim,et al.  Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model , 2008 .

[14]  J. Paulo Davim,et al.  Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor , 2008 .

[15]  A. Abrão,et al.  A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates , 2007 .

[16]  Vincenzo Tagliaferri,et al.  Drilling Damage of GFRP and Residual Mechanical Behavior - Part II: Static and Cyclic Bearing Loads , 2001 .

[17]  Shih-Chieh Lin,et al.  Drilling carbon fiber-reinforced composite material at high speed , 1996 .

[18]  H. Heidary,et al.  The effect of carbon nanotubes on the life of drilled glass / epoxy composite under fatigue loading , 2019 .

[19]  M. Ahmadi,et al.  Damage analysis for low velocity impacted composite laminates using acoustic emission technique , 2018 .

[20]  A. R. Oskouei,et al.  Characterization of residual strength in transversely loaded glass-polyester composites by acoustic emission and sentry function , 2018 .

[21]  M. A. Najafabadi,et al.  Correlation of acoustic emission with finite element predicted damages in open-hole tensile laminated composites , 2017 .

[22]  R. M. Cadambi,et al.  Drilling of GFRP Composites for Minimising Delamination Effect , 2017 .

[23]  A. Mehdi,et al.  Quantification of damage mechanisms in holed composite laminates by acoustic emission and finite element methods , 2016 .