Superhydrophobic fluorine-free hierarchical coatings produced by vacuum based method

Abstract In this study it is presented fully vacuum-based, substrate independent method for fabrication of fluorine-free superhydrophobic surfaces based on combination of gas aggregation sources of nanoparticles and plasma polymerization. This method involves deposition of films of nanoparticles that are subsequently overcoated by plasma polymerized n-hexane. Two different kinds of nanoparticles that differ significantly in their sizes were used: small Cu nanoparticles (mean diameter 18 nm) and big plasma polymerized C:H nanoparticles (diameter 110 nm). It is demonstrated that superhydrophobic and slippery character may be achieved when surfaces with dual-scale roughness were prepared combining bigger C:H nanoparticles with smaller Cu nanoparticles.

[1]  D. Savitz,et al.  Epidemiologic Evidence on the Health Effects of Perfluorooctanoic Acid (PFOA) , 2010, Environmental health perspectives.

[2]  W. Barthlott,et al.  Mimicking natural superhydrophobic surfaces and grasping the wetting process: a review on recent progress in preparing superhydrophobic surfaces. , 2011, Advances in colloid and interface science.

[3]  David Quéré,et al.  Wetting transitions on rough surfaces , 2004 .

[4]  Lei Jiang,et al.  Recent developments in bio-inspired special wettability. , 2010, Chemical Society reviews.

[5]  Angeliki Tserepi,et al.  Hierarchical micro and nano structured, hydrophilic, superhydrophobic and superoleophobic surfaces incorporated in microfluidics, microarrays and lab on chip microsystems , 2015 .

[6]  O. Gendelman,et al.  Superhydrophobicity of lotus leaves versus birds wings: different physical mechanisms leading to similar phenomena. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[7]  Michael Newton,et al.  Progess in superhydrophobic surface development. , 2008, Soft matter.

[8]  R. N. Wenzel RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[9]  M. Petr,et al.  Hydrophobic and super-hydrophobic coatings based on nanoparticles overcoated by fluorocarbon plasma polymer , 2014 .

[10]  Lei Jiang,et al.  Bio‐Inspired, Smart, Multiscale Interfacial Materials , 2008 .

[11]  Neelesh A Patankar,et al.  Mimicking the lotus effect: influence of double roughness structures and slender pillars. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[12]  Francesco Fracassi,et al.  Aerosol-assisted atmospheric cold plasma deposition and characterization of superhydrophobic organic-inorganic nanocomposite thin films. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[13]  A. Artemenko,et al.  Control of Wettability of Plasma Polymers by Application of Ti Nano‐Clusters , 2012 .

[14]  O. Kylián,et al.  Fabrication of Cu nanoclusters and their use for production of Cu/plasma polymer nanocomposite thin films , 2014 .

[15]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .