Multi-objective optimization of some process parameters of a lab-scale thickener using grey relational analysis

Abstract This paper presents a novel effective method for the optimization of some operating parameters of a laboratory scale thickener on the dewatering performance with multiple performance characteristics based on the grey relational analysis (GRA). Lab-scale thickener operation parameters including feed flowrate, solid percent, flocculant dosage and feedwell height were optimized based on multiple performance characteristics. Sixteen experiments were conducted using GRA to optimize the parameters for lab-scale thickener parameters to generate two quality characteristics (the underflow solid percent and bed height of thickener). Analysis of the grey relational grade indicates that parameter significance and the optimal parameter combination for the lab-scale thickener are identified. The analytical results from two confirmation experiments using the optimal process parameters confirm that the above performance characteristics in dewatering of tailing can be improved effectively through this approach.

[1]  J. L Lin,et al.  The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics , 2002 .

[2]  U. Çaydas,et al.  Use of the grey relational analysis to determine optimum laser cutting parameters with multi-performance characteristics , 2008 .

[3]  P. S. Kao,et al.  Optimization of electrochemical polishing of stainless steel by grey relational analysis , 2003 .

[4]  Cheng-Hung Huang,et al.  Optimization of Dry Machining Parameters for High-Purity Graphite in End-Milling Process , 2006 .

[5]  Chia-Ming Chang,et al.  The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing , 2002 .

[6]  Phillip D. Fawell,et al.  The effect of flocculant solution transport and addition conditions on feedwell performance in gravity thickeners , 2009 .

[7]  Yung-Kuang Yang,et al.  Optimization of Injection-Molding Process for Mechanical and Tribological Properties of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites with Grey Relational Analysis: A Case Study , 2006 .

[8]  D. R. Nagaraj,et al.  The use of a factorial experimental design to study collector properties of N-allyl-O-alkyl thionocarbamate collector in the flotation of a copper ore , 2002 .

[9]  Deng Ju-Long,et al.  Control problems of grey systems , 1982 .

[10]  Kees Wevers,et al.  Grey System Theory and Applications: A Way Forward , 2007 .

[11]  V. Yadava,et al.  Optimization of kerf quality during pulsed laser cutting of aluminium alloy sheet , 2008 .

[12]  P.Narender Singh,et al.  Optimization by Grey relational analysis of EDM parameters on machining Al–10%SiCP composites , 2004 .

[13]  N. Aslan,et al.  Optimization of process parameters for producing graphite concentrate using response surface methodology , 2008 .

[14]  N. Aslan,et al.  Modeling and optimization of Multi-Gravity Separator to produce celestite concentrate , 2007 .

[15]  C. Fung.  Manufacturing process optimization for wear property of fiber-reinforced polybutylene terephthalate composites with grey relational analysis , 2003 .

[16]  N. Aslan.  Multi-Objective Optimization of Some Process Parameters of Lead Flotation Using Grey Relational Analysis , 2012 .

[17]  A. Martı́nez-L,et al.  Study of celestite flotation efficiency using sodium dodecyl sulfonate collector: factorial experiment and statistical analysis of data , 2003 .

[18]  C. Wang,et al.  Optimizing multiple quality characteristics via Taguchi method-based Grey analysis , 2007 .

[19]  Vinod Yadava,et al.  Multi-objective optimization of Nd:YAG laser cutting of nickel-based superalloy sheet using orthogonal array with principal component analysis , 2008 .

[20]  Chih-Hung Tsai,et al.  Applying Grey Relational Analysis to the Decathlon Evaluation Model , 2003 .

[21]  Jiju Antony,et al.  Multi‐response optimization in industrial experiments using Taguchi's quality loss function and principal component analysis , 2000 .

[22]  Timothy J. Napier-Munn,et al.  Application of central composite rotatable design to modelling the effect of some operating variables on the performance of the three-product cyclone , 2005 .