Corrosion pit growth on austenitic stainless steels in chloride containing solution: a quantitative approach

Purpose – The purpose of this paper is to quantitatively assess the pit growth rate on AISI 304L and AISI 316 austenitic stainless steels in natural seawater and 3.5 wt.% NaCl solutions through electrochemical measurements during the potentiostatic growth of pits.Design/methodology/approach – A quantitative characterisation was carried out based on chronoamperometric measurements. The volume of dissolved metal per pit was calculated from the charge registered and Faraday's law, considering both, hemispherical and semi‐elliptical pit shapes and the density of the steels. Empirical growth laws for maximum pit depth as a function of polarisation time were obtained and compared with pits volumetric profile obtained from optical microscopy analysis and mechanical removal of material on both steels.Findings – Electrochemical‐based calculations of localised metal dissolution per pit present acceptable fit with the real volume of dissolved metal on hemispherical pits.Originality/value – The paper presents the qua...

[1]  Geoffrey I. N. Waterhouse,et al.  Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion , 2010 .

[2]  D. Blackwood,et al.  Real time pit initiation studies on stainless steels : The effect of sulphide inclusions , 2007 .

[3]  L. N. McCartney,et al.  A model to predict the evolution of pitting corrosion and the pit-to-crack transition incorporating statistically distributed input parameters , 2006 .

[4]  Ricardo M. Souto,et al.  Origins of pitting corrosion , 2004 .

[5]  J. González-Sánchez.  Corrosion fatigue initiation in stainless steels : The scanning reference electrode technique. , 2002 .

[6]  R. C. Newman,et al.  2001 W.R. Whitney Award Lecture: Understanding the Corrosion of Stainless Steel , 2001 .

[7]  Zhou,et al.  Influence of pitting on the fatigue life of a turbine blade steel , 1999 .

[8]  G. Frankel.  Pitting Corrosion of Metals A Review of the Critical Factors , 1998 .

[9]  R. Newman,et al.  Localised dissolution kinetics, salt films and pitting potentials , 1997 .

[10]  J. Castle,et al.  The initiation of pitting corrosion at MnS inclusions , 1993 .

[11]  Petrus Christiaan Pistorius,et al.  The nucleation and growth of corrosion pits on stainless steel , 1993 .

[12]  D. Macdonald.  The Point Defect Model for the Passive State , 1992 .

[13]  P. Pistorius,et al.  Detailed Investigation of Current Transients from Metastable Pitting Events on Stainless Steel - The Transition to Stability , 1992 .

[14]  J. Castle,et al.  Studies by auger spectroscopy of pit initiation at the site of inclusions in stainless steel , 1990 .

[15]  H. Isaacs.  The localized breakdown and repair of passive surfaces during pitting , 1989 .

[16]  Y. Kondo.  Prediction of Fatigue Crack Initiation Life Based on Pit Growth , 1989 .

[17]  G. Frankel,et al.  Metastable Pitting of Stainless Steel , 1987 .

[18]  R. Newman,et al.  Growth and Repassivation of Single Corrosion Pits in Stainless Steel , 1984 .