Non-Darcy natural convection in high porosity metal foams

We present numerical and experimental results for buoyancy-induced flows in high porosity metal foams heated from below. A Brinkman–Forchheimer-extended Darcy flow model and a semi-heuristic two-equation energy model obtained by relaxing the local thermal equilibrium (LTE) assumption are adopted. Experiments conducted under natural convection conditions for the same configuration are used to test the numerical model and the validity of the thermal equilibrium assumption for metal foams. Aluminum foam samples of different pore sizes (5–40 PPI) and porosities (0:89 6 e 6 0:97) are used to illustrate the effects of metal foam geometry on heat transfer. In addition, several metal foam–fluid combinations (aluminum–air, carbon–air, aluminum–water, and nickel–water) are used to study the heat transfer enhancement relative to the base case in which there is no metal foam but only a heated plate. Thermal dispersion effects and the effects of Darcy number on heat transfer are reported. Our results indicate that the thermal non-equilibrium model provides a superior description of heat transfer in metal foams, especially in the presence of fluid–porous interfaces. 2002 Elsevier Science Ltd. All rights reserved.

[1]  M. Martins-Costa,et al.  A local model for the heat transfer process in two distinct flow regions , 1994 .

[2]  Kambiz Vafai,et al.  Analysis of dispersion effects and non-thermal equilibrium, non-Darcian, variable porosity incompressible flow through porous media , 1994 .

[3]  R. C. Givler,et al.  A determination of the effective viscosity for the Brinkman–Forchheimer flow model , 1994, Journal of Fluid Mechanics.

[4]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[5]  N. Wakao,et al.  EFFECT OF FLUID DISPERSION COEFFICIENTS ON PARTICLE-TO-FLUID MASS TRANSFER COEFFICIENTS IN PACKED BEDS. CORRELATION OF SHERWOOD NUMBERS , 1978 .

[6]  Pei-Xue Jiang,et al.  NUMERICAL SIMULATION OF FORCED CONVECTION HEAT TRANSFER IN POROUS PLATE CHANNELS USING THERMAL EQUILIBRIUM AND NONTHERMAL EQUILIBRIUM MODELS , 1999 .

[7]  R. Mahajan,et al.  Forced Convection in High Porosity Metal Foams , 2000 .

[8]  K. Vafai,et al.  Effects of boundary conditions on non-Darcian heat transfer through porous media and experimental comparisons , 1995 .

[9]  R. Viskanta,et al.  Natural Convection Flow and Heat Transfer Between a Fluid Layer and a Porous Layer Inside a Rectangular Enclosure , 1987 .

[10]  C. L. Tien,et al.  Boundary and inertia effects on flow and heat transfer in porous media , 1981 .

[11]  C. Tien,et al.  Effects of thermal dispersion on forced convection in fibrous media , 1988 .

[12]  N. Wakao,et al.  Effect of fluid dispersion coefficients on particle-to-fluid heat transfer coefficients in packed beds , 1978 .

[13]  John F. Brady,et al.  The effective diffusivity of fibrous media , 1986 .

[14]  Kambiz Vafai,et al.  Analysis of fluid flow and heat transfer interfacial conditions between a porous medium and a fluid layer , 2001 .

[15]  R. Mahajan,et al.  Thermophysical properties of high porosity metal foams , 2002 .

[16]  Stephen Whitaker,et al.  ADVANCES IN THEORY OF FLUID MOTION IN POROUS MEDIA , 1969 .

[17]  J. Lloyd,et al.  Natural Convection Adjacent to Horizontal Surface of Various Planforms , 1974 .

[18]  G. Neale,et al.  Practical significance of brinkman's extension of darcy's law: Coupled parallel flows within a channel and a bounding porous medium , 1974 .

[19]  Shih-Wen Hsiao.  Natural convection in an inclined porous cavity with variable porosity and thermal dispersion effects , 1998 .

[20]  R. Mahajan,et al.  The Effective Thermal Conductivity of High Porosity Fibrous Metal Foams , 1999 .

[21]  A. Kuznetsov,et al.  Local thermal nonequilibrium effects in forced convection in a porous medium channel: a conjugate problem , 1999 .

[22]  A. Amiri.  Analysis of non-thermal equilibrium incompressible flow through porous media , 1993 .

[23]  J. P. Hartnett,et al.  Advances in Heat Transfer , 2003 .