Finite element analysis of the non-linear vibrations of moderately thick unsymmetrically laminated composite plates
暂无分享,去创建一个
Abstract The influence of finite amplitudes on the free flexural vibration response of moderately thick laminated plates is investigated. For this purpose, a simple higher order theory involving only four unknowns and satisfying the stress free conditions at the top and bottom surface of the composite plate is proposed. The proposed theory eliminates the use of shear correction factors which are otherwise required in Mindlin’s plate theory. A rectangular four-node[formula]continuous finite element is developed based on this theory. The non-linear finite element equations are reduced to two non-linear ordinary differential equations governing the response of positive and negative deflection cycles. Direct numerical integration method is then employed to obtain the periods or non-linear frequencies. The finite element developed and the direct numerical integration method employed are validated for the case of isotropic rectangular plates. It is found that unsymmetrically laminated rectangular plates with hinged-hinged edge conditions oscillate with different amplitudes in the positive and negative deflection cycles. Furthermore, such plates would oscillate with a frequency less than the fundamental frequency for finite small amplitudes of oscillation. It is shown that this behaviour is strongly influenced by the boundary conditions. Results are presented for many configurations of composite plates.