Hard-tissue-engineered zirconia porous scaffolds with hydroxyapatite sol-gel and slurry coatings.

A zirconia (ZrO(2)) porous scaffold was coated with a gradient apatite layer to induce osteoconductivity with the use of a combination of sol-gel and powder slurry methods. The ZrO(2) was used to impart mechanical strength and the apatite layer was coated for functional biocompatibility. The coating layer, from the outside in, was composed of sol-gel hydroxyapatite (HA)/slurry HA/slurry FA. The sol-gel coating powder had a lower crystallinity than the slurry coating powder. The sol-gel HA coating over the HA/FA slurry coating layer made the surface very smooth. The sol-gel coating over the slurry coating layer enhanced the bonding strength up to 33 MPa. The dissolution rate of the sol-gel/slurry coating layer was much higher than that of the slurry coating. Moreover, the rate could be controlled by altering the heat-treatment temperature of the sol-gel HA layer. The MG63 cells cultured on these materials grew and spread in a different manner, depending on the coating layer. However, the proliferation rates of the cells on both coating systems were not much different.

[1]  C. Hwang,et al.  Formation and characterization of hydroxyapatite coating layer on Ti-based metal implant by electron-beam deposition , 1999 .

[2]  M. F. Harrnand Human cell culture and characterization of cell/biomaterial interface , 1992 .

[3]  J. L. Baptista,et al.  Preparation and Characterization of Hydroxyapatite Coatings on Ti6Al4V Alloy by a Sol‐Gel Method , 2004 .

[4]  W. Tseng,et al.  Water-based sol-gel synthesis of hydroxyapatite: process development. , 2001, Biomaterials.

[5]  Hyoun‐Ee Kim,et al.  Sol-gel derived fluor-hydroxyapatite biocoatings on zirconia substrate. , 2004, Biomaterials.

[6]  Hyoun‐Ee Kim,et al.  Pressureless sintering and mechanical and biological properties of fluor-hydroxyapatite composites with zirconia , 2003 .

[7]  K. Akiyoshi,et al.  Single molecular mechanics of a cholesterol-bearing pullulan nanogel at the hydrophobic interfaces. , 2004, Biomaterials.

[8]  L. Dorr,et al.  Hydroxyapatite-coated proximal ingrowth femoral stems. A matched pair control study. , 1995, Clinical orthopaedics and related research.

[9]  P. Marie,et al.  Stimulation of bone formation in osteoporosis patients treated with fluoride associated with increased dna synthesis by osteoblastic cells in vitro , 1992, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[10]  George Georgiou,et al.  Calcium phosphates and glass composite coatings on zirconia for enhanced biocompatibility. , 2004, Biomaterials.

[11]  Hyoun‐Ee Kim,et al.  Dissolution control and cellular responses of calcium phosphate coatings on zirconia porous scaffold. , 2004, Journal of biomedical materials research. Part A.

[12]  Michael Jarcho,et al.  Calcium phosphate ceramics as hard tissue prosthetics. , 1981, Clinical orthopaedics and related research.

[13]  Hyoun‐Ee Kim,et al.  Porous ZrO2 bone scaffold coated with hydroxyapatite with fluorapatite intermediate layer. , 2003, Biomaterials.

[14]  Larry L. Hench,et al.  Bioceramics: From Concept to Clinic , 1991 .

[15]  C. Berndt,et al.  Review article: thermal spraying for bioceramic applications , 1990 .

[16]  J. Knowles Phosphate based glasses for biomedical applications , 2003 .

[17]  K. Anselme,et al.  Osteoblast adhesion on biomaterials. , 2000, Biomaterials.

[18]  K A Gross,et al.  Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review. , 2001, Journal of biomedical materials research.

[19]  D. Shi,et al.  Coating of hydroxyapatite on porous alumina substrate through a thermal decomposition method. , 1999, Journal of biomedical materials research.

[20]  P Ducheyne,et al.  Bioactive ceramic prosthetic coatings. , 1992, Clinical orthopaedics and related research.

[21]  J M Brady,et al.  Biodegradable ceramic implants in bone. Electron and light microscopic analysis. , 1971, Oral surgery, oral medicine, and oral pathology.

[22]  Raquel Zapanta LeGeros,et al.  Apatites in biological systems , 1981 .

[23]  Hyoun‐Ee Kim,et al.  Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol-gel method. , 2004, Biomaterials.