Multi-scale Analysis of MEMS Sensors Subject to Drop Impacts

The effect of accidental drops on MEMS sensors are examined within the framework of a multi-scale finite element approach. With specific reference to a polysilicon MEMS accelerometer supported by a naked die, the analysis is decoupled into macro-scale (at die length-scale) and meso-scale (at MEMS length-scale) simulations, accounting for the very small inertial contribution of the sensor to the overall dynamics of the device. Macro-scale analyses are adopted to get insights into the link between shock waves caused by the impact against a target surface and propagating inside the die, and the displacement/acceleration histories at the MEMS anchor points. Meso-scale analyses are adopted to detect the most stressed details of the sensor and to assess whether the impact can lead to possible localized failures. Numerical results show that the acceleration at sensor anchors cannot be considered an objective indicator for drop severity. Instead, accurate analyses at sensor level are necessary to establish how MEMS can fail because of drops.

[1]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[2]  Ioannis Chasiotis,et al.  The mechanical strength of polysilicon films: Part 2. Size effects associated with elliptical and circular perforations , 2003 .

[3]  Alberto Corigliano,et al.  Micro-Scale Simulation of Impact Rupture in Polysilicon MEMS , 2006 .

[4]  Horacio Dante Espinosa,et al.  Grain level analysis of crack initiation and propagation in brittle materials , 2001 .

[5]  W. Brantley.  Calculated elastic constants for stress problems associated with semiconductor devices , 1973 .

[6]  A. Corigliano,et al.  Simulation of Impact Rupture in Polysilicon Mems , 2006, EuroSime 2006 - 7th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems.

[7]  E. Suhir.  Is the maximum acceleration an adequate criterion of the dynamic strength of a structural element in an electronic product , 1997 .

[8]  Alberto Corigliano,et al.  On-Chip Electrostatically Actuated Bending Tests for the Mechanical Characterization of Polysilicon at the Micro Scale , 2005 .

[9]  I. Chasiotis,et al.  Elastic Properties and Representative Volume Element of Polycrystalline Silicon for MEMS , 2006 .

[10]  T. Hauck,et al.  Drop Simulation and Stress Analysis of MEMS Devices , 2006, EuroSime 2006 - 7th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems.

[11]  H. Espinosa,et al.  A grain level model for the study of failure initiation and evolution in polycrystalline brittle materials. Part I: Theory and numerical implementation , 2003 .

[12]  Matthias Ebert,et al.  Characterization of strength properties of thin polycrystalline silicon films for MEMS applications , 2007 .

[13]  Robert L. Mullen,et al.  Monte Carlo simulation of effective elastic constants of polycrystalline thin films , 1997 .

[14]  Ioannis Chasiotis,et al.  Mode I and mixed mode fracture of polysilicon for MEMS , 2007 .

[15]  S. Fauve,et al.  Collision of a 1-D column of beads with a wall , 1998 .

[16]  G. X Li,et al.  Drop test and analysis on micro-machined structures , 2000 .

[17]  V. T. Srikar,et al.  The reliability of microelectromechanical systems (MEMS) in shock environments , 2002 .

[18]  R. Taylor.  The Finite Element Method, the Basis , 2000 .