Life cycle and hydrologic modeling of rainwater harvesting in urban neighborhoods: Implications of urban form and water demand patterns in the US and Spain.

Water management plays a major role in any city, but applying alternative strategies might be more or less feasible depending on the urban form and water demand. This paper aims to compare the environmental performance of implementing rainwater harvesting (RWH) systems in American and European cities. To do so, two neighborhoods with a water-stressed Mediterranean climate were selected in contrasting cities, i.e., Calafell (Catalonia, Spain) and Ukiah (California, US). Calafell is a high-density, tourist city, whereas Ukiah is a typical sprawled area. We studied the life cycle impacts of RWH in urban contexts by using runoff modeling before (i.e. business as usual) and after the implementation of this system. In general, cisterns were able to supply >75% of the rainwater demand for laundry and toilet flushing. The exception were multi-story buildings with roofs smaller than 200m2, where the catchment area was insufficient to meet demand. The implementation of RWH was environmentally beneficial with respect to the business-as-usual scenario, especially because of reduced runoff treatment needs. Along with soil features, roof area and water demand were major parameters that affected this reduction. RWH systems are more attractive in Calafell, which had 60% lower impacts than in Ukiah. Therefore, high-density areas can potentially benefit more from RWH than sprawled cities.

[1]  Keah-Ying Lim,et al.  Assessment of public health risk associated with viral contamination in harvested urban stormwater for domestic applications. , 2015, The Science of the total environment.

[2]  Carles M. Gasol,et al.  Environmental assessment of different pipelines for drinking water transport and distribution network in small to medium cities: a case from Betanzos, Spain , 2014 .

[3]  Tian Yuan,et al.  Economic analysis of rainwater harvesting and irrigation methods, with an example from China , 2003 .

[4]  B. Rudolf,et al.  World Map of the Köppen-Geiger climate classification updated , 2006 .

[5]  Carles M. Gasol,et al.  Assessing the Energetic and Environmental Impacts of the Operation and Maintenance of Spanish Sewer Networks from a Life-Cycle Perspective , 2015, Water Resources Management.

[6]  Xavier Gabarrell,et al.  Applying exergy analysis to rainwater harvesting systems to assess resource efficiency , 2013 .

[7]  David J. Sample,et al.  Optimizing rainwater harvesting systems for the dual purposes of water supply and runoff capture , 2014 .

[8]  A. Josa,et al.  Towards Productive Cities: Environmental Assessment of the Food‐Energy‐Water Nexus of the Urban Roof Mosaic , 2018, Journal of industrial ecology.

[9]  Alan Fewkes,et al.  Simulating the performance of rainwater collection and reuse systems using behavioural models , 2000 .

[10]  Defne Apul,et al.  Development and application of EEAST: a life cycle based model for use of harvested rainwater and composting toilets in buildings. , 2013, Journal of environmental management.

[11]  X. Liang,et al.  Economic and financial analysis on rainwater harvesting for agricultural irrigation in the rural areas of Beijing , 2011 .

[12]  P. E. Poh,et al.  Prospects of hybrid rainwater-greywater decentralised system for water recycling and reuse: A review , 2017 .

[13]  Peter W. Mayer,et al.  Insights into declining single‐family residential water demands , 2012 .

[14]  Carles M. Gasol,et al.  Potential of rainwater resources based on urban and social aspects in Colombia , 2012 .

[15]  Gabriela Cristina Ribeiro Pacheco,et al.  Economic feasibility of rainwater harvesting systems: a systematic literature review , 2017 .

[16]  Rodney Anthony Stewart,et al.  Energy intensity of rainwater harvesting systems: A review , 2014 .

[17]  A. Josa,et al.  Are we preventing flood damage eco-efficiently? An integrated method applied to post-disaster emergency actions. , 2017, The Science of the total environment.

[18]  Hiroaki Furumai,et al.  Rainwater and reclaimed wastewater for sustainable urban water use , 2008 .

[19]  C Anand,et al.  Economic and environmental analysis of standard, high efficiency, rainwater flushed, and composting toilets. , 2011, Journal of environmental management.

[20]  Carles M. Gasol,et al.  Environmental analysis of rainwater harvesting infrastructures in diffuse and compact urban models of Mediterranean climate , 2011, The International Journal of Life Cycle Assessment.

[21]  Defne Apul,et al.  Performance and Cost-Based Comparison of Green and Gray Infrastructure to Control Combined Sewer Overflows , 2016 .

[22]  M. Fragkou,et al.  An ecosystemic approach for assessing the urban water self-sufficiency potential: lessons from the Mediterranean , 2016 .

[23]  Ana Cláudia Dias,et al.  Plugrisost: a model for design, economic cost and environmental analysis of rainwater harvesting in urban systems , 2014 .

[24]  Carles M. Gasol,et al.  Financial feasibility and environmental analysis of potential rainwater harvesting systems: A case study in Spain , 2012 .

[25]  E. Ghisi,et al.  Potential for potable water savings by combining the use of rainwater and greywater in houses in southern Brazil , 2007 .

[26]  John M. Cimbala,et al.  Fluid Mechanics: Fundamentals and Applications , 2004 .

[27]  Cheng-Li Cheng.  Study of the inter-relationship between water use and energy conservation for a building , 2002 .

[28]  Eran Friedler,et al.  Urban rainwater harvesting systems: Research, implementation and future perspectives. , 2017, Water research.

[29]  Enedir Ghisi,et al.  Rainwater harvesting in petrol stations in Brasília: Potential for potable water savings and investment feasibility analysis , 2009 .

[30]  Bing Liu,et al.  U.S. Department of Energy Commercial Reference Building Models of the National Building Stock , 2011 .

[31]  Defne Apul,et al.  Life cycle based evaluation of harvested rainwater use in toilets and for irrigation , 2015 .

[32]  M. Chester,et al.  The Growth of Urban Building Stock: Unintended Lock‐in and Embedded Environmental Effects , 2015 .

[33]  T. Nemecek,et al.  Overview and methodology: Data quality guideline for the ecoinvent database version 3 , 2013 .

[34]  Bruno Tassin,et al.  Rainwater harvesting to control stormwater runoff in suburban areas. An experimental case-study , 2012 .

[35]  A. Josa,et al.  Environmental performance of rainwater harvesting strategies in Mediterranean buildings , 2017, The International Journal of Life Cycle Assessment.

[36]  V. G. Mitchell.  How important is the selection of computational analysis method to the accuracy of rainwater tank behaviour modelling? , 2007 .

[37]  Heejun Chang,et al.  Spatial Variations of Single-Family Residential Water Consumption in Portland, Oregon , 2010 .

[38]  Andrew M. Dixon,et al.  Analysis of a rainwater collection system for domestic water supply in Ringdansen, Norrköping, Sweden , 2005 .

[39]  David Saurí,et al.  A comparative appraisal of the use of rainwater harvesting in single and multi-family buildings of the Metropolitan Area of Barcelona (Spain): social experience, drinking water savings and economic costs , 2011 .

[40]  Lúcio Costa Proença,et al.  Potential for electricity savings by reducing potable water consumption in a city scale , 2011 .

[41]  F. Meneguzzo,et al.  Expanding the Distributed Generation Concept: Toward Decentralized Energy and Water Supply , 2018, Global challenges.

[42]  R. Cohen.  Handbook of Water Use and Conservation , 2002 .

[43]  Xavier Gabarrell,et al.  Cost-effective rainwater harvesting system in the Metropolitan Area of Barcelona , 2014 .

[44]  D. C. Soule,et al.  Urban Sprawl: A Comprehensive Reference Guide , 2005 .