Preparation and characteristics of highly porous BN-Si3N4 composite ceramics by combustion synthesis

[1]  Jiangtao Li,et al.  Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS) , 2021, Journal of Advanced Ceramics.

[2]  Yongda Yan,et al.  Microstructure and mechanical and thermal shock properties of hierarchically porous ceramics , 2021, Ceramics International.

[3]  Rui Zhang,et al.  Preparation of Si2N2O wave-transparent and thermal insulation materials with Na2CO3 and BN as aids by pressureless sintering , 2021 .

[4]  P. Panda,et al.  High temperature ceramic radomes (HTCR) – A review , 2021 .

[5]  Fuqian Yang,et al.  Hollow-grained “Voronoi foam” ceramics with high strength and thermal superinsulation up to 1400 °C , 2021 .

[6]  Yongde Xia,et al.  Porous ceramics: Light in weight but heavy in energy and environment technologies , 2021, Materials Science and Engineering: R: Reports.

[7]  Jiangtao Li,et al.  Combustion synthesis of high flexural strength, low linear shrinkage and machinable porous β-Si3N4 ceramics , 2020 .

[8]  Haoming Wu,et al.  Preparation and properties of porous silicon nitride ceramics with polymethyl methacrylate as pore-forming agent , 2020 .

[9]  Shuang Li,et al.  Silicon nitride ceramics consolidated by oscillatory pressure sintering , 2020, Ceramics International.

[10]  Zhihua Yang,et al.  Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites , 2020, Ceramics International.

[11]  G. Wen,et al.  A new precursor to lightweight porous Si–Al–O–B ceramics with enhanced microwave transmissivity , 2020 .

[12]  B. Han,et al.  Preparation of porous silicon nitride ceramics by freeze drying , 2019, Journal of Materials Research and Technology.

[13]  Lai-fei Cheng,et al.  Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration , 2019, Journal of Advanced Ceramics.

[14]  Yuping Zeng,et al.  Fabrication and mechanical properties of porous Si3N4 ceramics prepared via SHS , 2019, Ceramics International.

[15]  Wei-min Liu,et al.  Temperature‐driven wear behavior of Si 3 N 4 ‐based ceramic reinforced by in situ formed TiC 0.3 N 0.7 particles , 2019, Journal of the American Ceramic Society.

[16]  Xingxiang Zhang,et al.  Synthesis and properties of self-assembled ultralong core-shell Si3N4/SiO2 nanowires by catalyst-free technique , 2019, Ceramics International.

[17]  Litong Zhang,et al.  Electromagnetic Performance of CVD Si3N4–SiCN Ceramics Oxidized from 500 to 1000 °C , 2018, Advanced Engineering Materials.

[18]  Mi-Ju Kim,et al.  Enhanced thermal conductivity in Si3N4 ceramic with the addition of Y2Si4N6C , 2018 .

[19]  Yawei Wu,et al.  Porous Hexagonal Boron Nitride Sheets: Effect of Hydroxyl and Secondary Amino Groups on Photocatalytic Hydrogen Evolution , 2018, ACS Applied Nano Materials.

[20]  Kui Liu,et al.  Investigation on mechanical properties and microstructure of silicon nitride ceramics fabricated by spark plasma sintering , 2018, Materials Science and Engineering: A.

[21]  Tianbin Zhu,et al.  Optimum sintering temperature of high quality silicon nitride ceramics under oscillatory pressure , 2018 .

[22]  M. Abbasgholipour,et al.  Various types of ceramics used in radome: A review , 2017 .

[23]  Kun Liu,et al.  Fabrication and properties of porous silicon nitride wave-transparent ceramics via gel-casting and pressureless sintering , 2016 .

[24]  Sen Li,et al.  Preparation of silicon nitride-barium aluminum silicate composites by freeze gelation , 2015 .

[25]  Kun Liu,et al.  Fabrication and properties of borazine derived boron nitride bonded porous silicon aluminum oxynitride wave-transparent composite , 2014 .

[26]  Aimin Li,et al.  Flocculation of both anionic and cationic dyes in aqueous solutions by the amphoteric grafting flocculant carboxymethyl chitosan-graft-polyacrylamide. , 2013, Journal of hazardous materials.

[27]  B. He,et al.  Research about the Porous Ceramics of Al2O3-TiB2 System by SHS Method , 2011 .

[28]  Chang‐an Wang,et al.  Effect of sintering temperature on compressive strength of porous yttria-stabilized zirconia ceramics , 2010 .

[29]  Yong Huang,et al.  Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity , 2010 .

[30]  Yong Huang,et al.  Ceramics With Ultra‐Low Density Fabricated by Gelcasting: An Unconventional View , 2007 .

[31]  A. Katbab,et al.  Preparation and characterization of nanocomposite hydrogels based on polyacrylamide for enhanced oil recovery applications , 2006 .

[32]  A. Mukherjee,et al.  Spark plasma sintering of silicon nitride/silicon carbide nanocomposites with reduced additive amounts , 2005 .

[33]  S. Guo,et al.  Hot‐Pressed Silicon Nitride with Lu2O3 Additives: Oxidation and Its Effect on Strength , 2003 .

[34]  T. Ohji,et al.  Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive , 2003 .

[35]  Di Zhang,et al.  Combustion synthesis of highly porous ceramics: The TiC-Al2O3 system , 1999 .

[36]  A. Merzhanov,et al.  Structure formation in porous materials produced by gravity-sensitive SHS , 1998 .

[37]  Sylvia M. Johnson,et al.  Strength and Creep Behavior of Rare‐Earth Disilicate–Silicon Nitride Ceramics , 1992 .

[38]  M. Yüksel,et al.  Investigation of the thermal decomposition kinetics of polyacrylamide using a dynamic TG technique , 1987 .

[39]  S. Brown,et al.  High-temperature mechanical properties and microstructures for hot-pressed silicon nitrides with amorphous and crystalline intergranular phases , 1985 .

[40]  D. Hasselman,et al.  Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics , 1969 .

[41]  D. Hasselman.  Griffith Criterion and Thermal Shock Resistance of Single‐Phase Versus Multiphase Brittle Ceramics , 1969 .

[42]  D. Hasselman,et al.  Elastic Energy at Fracture and Surface Energy as Design Criteria for Thermal Shock , 1963 .

[43]  W. Kingery.  Metal‐Ceramic Interactions:IV, Absolute Measurement of Metal‐Ceramic Interfacial Energy and the Interfacial Adsorption of Silicon from Iron‐Silicon Alloys , 1954 .

[44]  Jinlong Yang,et al.  Directly growing nanowire-assembled nanofibrous ceramic foams with multi-lamellar structure via freeze-casting process , 2021 .

[45]  B. Fan,et al.  Fabrication and properties of Si2N2O ceramics for microwave sintering furnace , 2020 .

[46]  E. Levashov,et al.  Self-propagating high-temperature synthesis of advanced ceramics MoSi2–HfB2–MoB , 2019, Ceramics International.

[47]  Haifeng Zhou,et al.  Microstructure and properties of BN/Si3N4 composites with addition of microwave synthesized Y2O3-MgO nanopowders , 2019, Ceramics International.

[48]  Shichao Liu,et al.  A novel silica aerogel/porous Si3N4 composite prepared by freeze casting and sol-gel impregnation with high-performance thermal insulation and wave-transparent , 2015 .

[49]  A. Pires,et al.  Synthesis and structural characterization of carbon-rich SiCxOy derived from a Ni-containing hybrid polymer , 2008 .

[50]  M. Mitomo,et al.  Microstructural Development During Gas‐Pressure Sintering of α‐Silicon Nitride , 1992 .

[51]  W. Kingery,et al.  Factors Affecting Thermal Stress Resistance of Ceramic Materials , 1955 .