Choosing the most suitable analogue redesign method for forward-type digital power converters

This work proposes a method to objectively determine the most suitable analogue redesign method for forward type converters under digital voltage mode control. Particular emphasis is placed on determining the method which allows the highest phase margin at the particular switching and crossover frequencies chosen by the designer. It is shown that at high crossover frequencies with respect to switching frequency, controllers designed using backward integration have the largest phase margin; whereas at low crossover frequencies with respect to switching frequency, controllers designed using bilinear integration have the largest phase margins. An accurate model of the power stage is used for simulation, and experimental results from a Buck converter are collected. The performance of the digital controllers is compared to that of the equivalent analogue controller both in simulation and experiment. Excellent correlation between the simulation and experimental results is presented. This work will allow designers to confidently choose the analogue redesign method which yields the greater phase margin for their application.

[1]  D. Maksimovic,et al.  Small-signal Discrete-time Modeling of Digitally Controlled DC-DC Converters , 2006, 2006 IEEE Workshops on Computers in Power Electronics.

[2]  H. Jin,et al.  Digital controller design for switchmode power converters , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).

[3]  M. H. Pong,et al.  Comparison of three approaches on DSP based digital controlled 2-wheeler forward converter , 1994, Proceedings of 1994 IEEE International Conference on Industrial Technology - ICIT '94.

[4]  A. Prodic,et al.  Design of a digital PID regulator based on look-up tables for control of high-frequency DC-DC converters , 2002, 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings..

[5]  D. Maksimovic,et al.  Detection of instability and adaptive compensation of digitally controlled switched-mode power supplies , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..

[6]  Majid A. H. Abdul-Karim,et al.  Microcomputer-controlled sampling digital power, rms and PF meter , 1987 .

[7]  N. Mohan,et al.  A digital-signal-processor based controller for a switching converter , 1994 .

[8]  Jano Malvar,et al.  Effects of Discretization Methods on the Performance of Resonant Controllers , 2010, IEEE Transactions on Power Electronics.

[9]  Aleksandar Prodic,et al.  High-frequency digital PWM controller IC for DC-DC converters , 2003 .

[10]  T. W. Martin,et al.  Digital control for switching converters , 1995, 1995 Proceedings of the IEEE International Symposium on Industrial Electronics.

[11]  S. Chattopadhyay,et al.  A Digital Current-Mode Control Technique for DC–DC Converters , 2006, IEEE Transactions on Power Electronics.

[12]  Sanjaya Maniktala,et al.  Switching power supplies A to Z , 2006 .

[13]  Sam Ben-Yaakov,et al.  Investigation of Time Domain Design of Digital Controllers for PWM Converters , 2006, 2006 IEEE 24th Convention of Electrical & Electronics Engineers in Israel.

[14]  Reza Ghazi,et al.  Robust control of DC/DC PWM converters: a comparison of H/sub /spl infin//, /spl mu/, and fuzzy logic based approaches , 2003, Proceedings of 2003 IEEE Conference on Control Applications, 2003. CCA 2003..

[15]  Abraham Pressman,et al.  Switching Power Supply Design , 1997 .

[16]  Yan-Fei Liu,et al.  Recent Developments in Digital Control Strategies for DC/DC Switching Power Converters , 2009 .

[17]  Majid A. H. Abdul-Karim,et al.  Digital power factor meter based on non-linear analogue-to-digital conversion , 1985 .

[18]  Chian-Song Chiu,et al.  Finite-time control of DC–DC buck converters via integral terminal sliding modes , 2012 .

[19]  Yuan-Yih Hsu,et al.  Application of Sliding Modes to Digital Power System Stabilizer Design , 1986 .

[20]  B. Anderson,et al.  Digital control of dynamic systems , 1981, IEEE Transactions on Acoustics, Speech, and Signal Processing.

[21]  I. Batarseh,et al.  Digital controller design for a practicing power electronics engineer , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[22]  Shamim Choudhury Digital Control Design and Implementation of a DSP Based High-Frequency DC-DC Switching Power Converter , 2004 .

[23]  Hebertt Sira-Ramírez,et al.  Robust sigma–delta generalised proportional integral observer based control of a ‘buck’ converter with uncertain loads , 2010, Int. J. Control.