Repetitive control design and implementation for linear motor machine tool

The goal of this paper is to eliminate the period tracking error via the design of discrete-time domain repetitive controller. It increases the stabilizing range and enhances the robust performance by adopting the prototype repetitive controller design principle to compensate repetitive control. Furthermore, with the concept of command feedforward, it introduces the feedforward gains of speed and acceleration, which can forcefully enhance the tracking ability of the repetitive controller and improve on the errors of the system. Finally, it puts into practice the theory on a gantry type machinery platform with linear motors. The results prove that the theory can reduce period tracking error successfully.

[1]  H. Ishioka,et al.  Compensation for repeatable tracking errors in hard drives using discrete-time repetitive controllers , 2001 .

[2]  Masayoshi Tomizuka,et al.  Adaptive And Repetitive Digital Control Algorithms for Noncircular Machining , 1988, 1988 American Control Conference.

[3]  An-Chen Lee,et al.  New direct velocity and acceleration feedforward tracking control in a retrofitted milling machine , 1999 .

[4]  O. Masory.  Improving Contouring Accuracy of NC/CNC Systems With Additional Velocity Feed Forward Loop , 1986 .

[5]  Tsu-Chin Tsao,et al.  Dynamic variable depth of cut machining using piezoelectric actuators , 1994 .

[6]  Mi-Ching Tsai,et al.  Analysis and Estimation of Tracking Errors of Plug-in Type Repetitive Control Systems , 2005, IEEE Trans. Autom. Control..

[7]  C.James Li,et al.  To improve workpiece roundness in precision diamond turning by in situ measurement and repetitive control , 1996 .

[8]  Li Yu,et al.  Study on Repetitive Controller for the Position Servo System of Electrical Injection Molding Machine , 2006, 2006 6th World Congress on Intelligent Control and Automation.

[9]  Huixing Zhou,et al.  Repetitive control and its application to linear servo unit for CNC machining of elliptical pistons , 1996, Proceedings of the IEEE International Conference on Industrial Technology (ICIT'96).

[10]  Michio Nakano,et al.  High Accuracy Control of a Proton Synchrotron Magnet Power Supply , 1981 .

[11]  Li Cuiyan,et al.  Theory and applications of the repetitive control , 2004, SICE 2004 Annual Conference.

[12]  Masayoshi Tomizuka,et al.  Steady-State and Stochastic Performance of a Modified Discrete-Time Prototype Repetitive Controller , 1990 .

[13]  H. L. Broberg,et al.  Reduction of repetitive errors in tracking of periodic signals: theory and application of repetitive control , 1992, [Proceedings 1992] The First IEEE Conference on Control Applications.

[14]  George Anwar,et al.  Low Velocity Friction Compensation and Feedforward Solution based on Repetitive Control , 1991, 1991 American Control Conference.