Various startup system designs of HPLWR and their thermal analysis

Abstract This paper summarizes the results of various startup system designs and their thermal analysis of the high performance light water reactor (HPLWR) which is the European version of the various supercritical water cooled reactor proposals. In order to study the thermal-hydraulic characteristics of the HPLWR core, a simplified axial one-dimensional (1D) single channel model is developed, which consists of fuel, cladding, coolant and moderator. The model is verified by the related results of Seppala (2008) . Both constant pressure startup systems and sliding pressure startup systems of HPLWR are presented. In constant pressure startup system, the reactor starts at supercritical pressure. It appears that compared with other SCWR designs, the weight of the component required for constant pressure startup of HPLWR is medium and reasonable. Constant pressure startup systems are found feasible from thermal analysis. And for sliding pressure startup, the reactor starts at subcritical pressure. The adequate core power of 25% with 28% flow rate and a feedwater temperature of 280 °C are determined during pressurization phase. The thermal analysis results show that the sliding pressure startup systems for HPLWR are also feasible. Considering the same flow rate as the supercritical-pressure light water-cooled fast reactor (SCFR), the component weight required is reduced in HPLWR.

[1]  E. Royer,et al.  The 1995 look-up table for critical heat flux in tubes , 1996 .

[2]  S. Koshizuka,et al.  Control of a Fast Reactor Cooled by Supercritical Light Water , 1998 .

[3]  S. Koshizuka,et al.  Numerical analysis of deterioration phenomena in heat transfer to supercritical water , 1995 .

[4]  Wenxi Tian,et al.  Development of TACOS code for loss of flow accident analysis of SCWR with mixed spectrum core , 2012 .

[5]  Francesco Saverio D'Auria,et al.  Thermohydraulic Relationships for Advanced Water Cooled Reactors , 2001 .

[6]  T. Fujii,et al.  Forced convective heat transfer to supercritical water flowing in tubes , 1972 .

[7]  Lanfranco Monti,et al.  Development of a coupled neutronic/thermal-hydraulic tool with multi-scale capabilities and applications to HPLWR core analysis , 2011 .

[8]  Eckart Laurien,et al.  European supercritical water cooled reactor , 2011 .

[9]  Yoshiaki Oka,et al.  Pressure- and Flow-Induced Accident and Transient Analyses of a Direct-Cycle, Supercritical-Pressure, Light-Water-Cooled Fast Reactor , 1998 .

[10]  S. Koshizuka,et al.  Flow-Induced Accident and Transient Analyses of a Direct-Cycle, Light-Water-Cooled, Fast Breeder Reactor Operating at Supercritical Pressure , 1996 .

[11]  Kataoka Isao,et al.  Mechanistic modeling of pool entrainment phenomenon , 1984 .

[12]  T. Schulenberg,et al.  CORE DESIGN CONCEPTS FOR HIGH PERFORMANCE LIGHT WATER REACTORS , 2007 .

[13]  Yoshiaki Oka,et al.  Startup Thermal Considerations for Supercritical-Pressure Light Water-Cooled Reactors , 2001 .

[14]  Y. Oka,et al.  Thermal and stability considerations for a supercritical water-cooled fast reactor with downward-flow channels during power-raising phase of plant startup , 2009 .