A Ka-Band doherty power amplifier with 25.1 dBm output power, 38% peak PAE and 27% back-off PAE

We present the design and development of the first fully integrated, two stage Doherty power amplifier (DPA) in the Ka-Band. The DPA is fabricated in a 0.15-μm GaAs pseudomorphic high electron mobility transistor (pHEMT) process. At 26.4 GHz, the amplifier achieves measured small signal gain of 10.3 dB, output power at 1-dB compression point (P1dB) of 25.1 dBm, peak power added efficiency (PAE) of 38%, and PAE of 27% at 6 dB back-off power. To the best of the author's knowledge, this Doherty circuit is the first fully integrated millimeter-wave amplifier that achieves the highest power and a recorded 27% PAE at 6-dB back-off and each unit amplifier has 2 stages.

[1]  Jeng-Han Tsai,et al.  A 38–46 GHz MMIC Doherty Power Amplifier Using Post-Distortion Linearization , 2007, IEEE Microwave and Wireless Components Letters.

[2]  Zhouyue Pi,et al.  An introduction to millimeter-wave mobile broadband systems , 2011, IEEE Communications Magazine.

[3]  Calvin Plett,et al.  Adapting the Doherty amplifier for millimetre-wave CMOS applications , 2011, 2011 IEEE 9th International New Circuits and systems conference.

[4]  Lawrence Larson,et al.  A 45GHz Doherty power amplifier with 23% PAE and 18dBm output power, in 45nm SOI CMOS , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[5]  Raymond S. Pengelly,et al.  The Doherty power amplifier , 2015, 2015 IEEE MTT-S International Microwave Symposium.