Characterization of exfoliated graphite nanoplatelets/polycarbonate composites: electrical and thermal conductivity, and tensile, flexural, and rheological properties

Exfoliated graphite nanoplatelets (GNP) can be added polymers to produce electrically conductive composites. In this study, varying amounts (2–15 wt%) GNP were added to polycarbonate (PC) and the resulting composites were tested for electrical conductivity (1/electrical resistivity), thermal conductivity, and tensile, flexural, and rheological properties. The percolation threshold was approximately 4.0 vol% (6.5 wt%) GNP. The addition of GNP to polycarbonate increased the composite electrical and thermal conductivity and tensile and flexural modulus. The 8 wt% (5.0 vol%) GNP in polycarbonate composite had a good combination of properties for electrostatic dissipative applications. The electrical resistivity and thermal conductivity were 4.0 × 107 ohm-cm and 0.37 W/m · K, respectively. The tensile modulus, ultimate tensile strength, and strain at ultimate tensile strength were 3.5 GPa, 58 MPa, and 3.5%, respectively. The flexural modulus, ultimate flexural strength, and strain at ultimate flexural strength were 3.6 GPa, 108 MPa, and 5.5%, respectively. Ductile tensile behavior is noted in pure polycarbonate and in samples containing up to 8 wt% GNP. PC and GNP/PC composites show shear-thinning behavior. Viscosity of the composite increased as the amount of GNP increased dueto a volume-filling filler effect. The viscosity of the GNP/PC composites are well described by a Kitano-modified Maron-Pierce model.

[1]  T. Vu-khanh,et al.  Extrusion of Mica Filled Polypropylene , 1988 .

[2]  L. Drzal,et al.  Mechanical properties and morphological characterization of exfoliated graphite–polypropylene nanocomposites , 2007 .

[3]  Musa R. Kamal,et al.  Estimation of the volume resistivity of electrically conductive composites , 1997 .

[4]  D. Bigg.  Effect of compounding on the properties of short fiber reinforced injection moldable thermoplastic composites , 1985 .

[5]  M. Narkis,et al.  New injection moldable electrostatic dissipative (ESD) composites based on very low carbon black loadings , 1999 .

[6]  Julia A. King,et al.  Factorial design approach applied to electrically and thermally conductive nylon 6,6 , 2001 .

[7]  I. Miskioglu,et al.  Electrical and thermal conductivity and tensile and flexural properties of carbon nanotube/polycarbonate resins , 2010 .

[8]  Walter Richtering,et al.  Understanding Rheology , 2002 .

[9]  Guohua Chen,et al.  Preparation of polymer/graphite conducting nanocomposite by intercalation polymerization , 2001 .

[10]  L. Drzal,et al.  Multifunctional xGnP/LLDPE Nanocomposites Prepared by Solution Compounding Using Various Screw Rotating Systems , 2009 .

[11]  D. Bigg.  Mechanical, thermal, and electrical properties of metal fiber‐filled polymer composites , 1979 .

[12]  Jing Li,et al.  Conductive graphite nanoplatelet/epoxy nanocomposites: Effects of exfoliation and UV/ozone treatment of graphite , 2005 .

[13]  M. Xiao,et al.  Short carbon fiber reinforced electrically conductive aromatic polydisulfide/expanded graphite nanocomposites , 2005 .

[14]  J. M. Finan.  Thermally conductive thermoplastics , 2000 .

[15]  L. Drzal,et al.  Dynamic Mechanical and Thermal Properties of Phenylethynyl‐Terminated Polyimide Composites Reinforced With Expanded Graphite Nanoplatelets , 2005 .

[16]  P. E. Pierce,et al.  Application of ree-eyring generalized flow theory to suspensions of spherical particles , 1956 .

[17]  T. Kitano,et al.  An empirical equation of the relative viscosity of polymer melts filled with various inorganic fillers , 1981 .

[18]  P. Askeland,et al.  The nucleating effect of exfoliated graphite nanoplatelets and their influence on the crystal structure and electrical conductivity of polypropylene nanocomposites , 2008 .

[19]  J. E. Mark,et al.  Comparisons Among Electrical and Rheological Properties of Melt-Mixed Composites Containing Various Carbon Nanostructures , 2009 .

[20]  I. Miskioglu,et al.  Electrical and thermal conductivity and tensile and flexural properties: Comparison of carbon black/polycarbonate and carbon nanotube/polycarbonate resins , 2011 .

[21]  Y. Agari,et al.  Thermal conductivity of polymer filled with carbon materials: Effect of conductive particle chains on thermal conductivity , 1985 .

[22]  Donald M. Bigg Battelle.  Conductive polymeric compositions , 1977 .

[23]  L. Drzal,et al.  Multifunctional polypropylene composites produced by incorporation of exfoliated graphite nanoplatelets , 2007 .

[24]  L. Drzal,et al.  Multifunctional high density polyethylene nanocomposites produced by incorporation of exfoliated graphite nanoplatelets 1: Morphology and mechanical properties , 2010 .

[25]  F. Morrison,et al.  Comparison of rheological properties of carbon nanotube/polycarbonate and carbon black/polycarbonate composites , 2011 .

[26]  L. Drzal,et al.  Real-time observation of the expansion behavior of intercalated graphite flake , 2005 .

[27]  사가 유지,et al.  Thermally conductive polymer compositions and articles made therefrom , 2010 .

[28]  E. B. Bagley.  End Corrections in the Capillary Flow of Polyethylene , 1957 .

[29]  L. Drzal,et al.  Effects of bromination on the viscoelastic response of vinyl ester nanocomposites , 2009 .

[30]  Jan-Chan Huang,et al.  Carbon black filled conducting polymers and polymer blends , 2002 .

[31]  K. Nagata,et al.  Effect of particle size of graphites on electrical conductivity of graphite/polymer composite , 1998 .

[32]  Lawrence T. Drzal,et al.  A new compounding method for exfoliated graphite–polypropylene nanocomposites with enhanced flexural properties and lower percolation threshold , 2007 .

[33]  Lawrence T. Drzal,et al.  Thermal conductivity of exfoliated graphite nanocomposites , 2006 .

[34]  L. Drzal,et al.  Flexural and tensile moduli of polypropylene nanocomposites and comparison of experimental data to Halpin-Tsai and Tandon-Weng models , 2007 .