Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

The study is focused on ultra-light foam concrete (FC) aimed as a thermal insulation material. Two important properties of such material were investigated: compressive strength and thermal conductivity. In the conducted tests, the influence of the air-dry density (200–500 kg/m3), type of foaming agent (synthetic and protein) and binder type (ordinary Portland cement—OPC; calcium sulphoaluminate cement—CSA; metakaolin; siliceous fly ash—SFA; calcareous fly ash—CFA) on the mentioned properties were examined. The results confirmed the dependence of compressive strength and thermal conductivity on the FC density but also indicated the important effect of the nature of the foaming agent and the binder type. The best thermo-mechanical properties were obtained for the foam concrete made of protein-based foaming agent, OPC and metakaolin. Simultaneously, the use of CSA mixed with metakaolin and foam based on the synthetic foaming agent also shows satisfactory properties.

[1]  Y. Mehta,et al.  Evaluating the potential of using foamed concrete as the insulation layer for pavements in cold regions , 2022, Construction and Building Materials.

[2]  Li Zhang,et al.  A Systematic Research on Foamed Concrete: The Effects of Foam Content, Fly Ash, Slag, Silica Fume and Water-to-Binder Ratio , 2022, SSRN Electronic Journal.

[3]  T. Bilir,et al.  A Detailed Review on Foam Concrete Composites: Ingredients, Properties, and Microstructure , 2022, Applied Sciences.

[4]  X. Shang,et al.  Development and functional characteristics of novel foam concrete , 2022, Construction and Building Materials.

[5]  M. Gołaszewska,et al.  Thermal Properties of Calcium Sulphoaluminate Cement as an Alternative to Ordinary Portland Cement , 2021, Materials.

[6]  O. Bayraktar,et al.  Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw , 2021 .

[7]  P. Folino,et al.  Triaxial Failure Behavior of Highly Porous Cementitious Foams Used as Heat Insulation , 2021, Processes.

[8]  O. Bayraktar,et al.  Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze–thaw cycles , 2021, Construction and Building Materials.

[9]  D. Stephan,et al.  The performance of ultra-lightweight foamed concrete incorporating nanosilica , 2021, Archives of Civil and Mechanical Engineering.

[10]  Zhongyuan Lu,et al.  Influence of foaming agent on cement and foam concrete , 2021 .

[11]  M. Tantray,et al.  Comparative study on the performance of protein and synthetic-based foaming agents used in foamed concrete , 2021, Case Studies in Construction Materials.

[12]  O. Gencel,et al.  Recycling waste concretes as fine aggregate and fly ash as binder in production of thermal insulating foam concretes , 2021 .

[13]  D. Falliano,et al.  A simple optimized foam generator and a study on peculiar aspects concerning foams and foamed concrete , 2020 .

[14]  O. Gencel,et al.  Influence of expanded vermiculite powder and silica fume on properties of foam concretes , 2020 .

[15]  Xiao-hua Wang,et al.  Effect of silica fume and waste marble powder on the mechanical and durability properties of cellular concrete , 2020 .

[16]  Xiuling Wang,et al.  Foam Concrete: A State-of-the-Art and State-of-the-Practice Review , 2020 .

[17]  G. Ricciardi,et al.  Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density , 2019, Construction and Building Materials.

[18]  Z. Tao,et al.  Effect of magnetized water on foam stability and compressive strength of foam concrete , 2019, Construction and Building Materials.

[19]  Qian Su,et al.  Experimental Study on the Effect of Water on the Properties of Cast In Situ Foamed Concrete , 2018, Advances in Materials Science and Engineering.

[20]  Chao Sun,et al.  Effects of foaming agent type on the workability, drying shrinkage, frost resistance and pore distribution of foamed concrete , 2018, Construction and Building Materials.

[21]  K. Anand,et al.  Utilization of recycled waste as filler in foam concrete , 2018, Journal of Building Engineering.

[22]  G. Ricciardi,et al.  Experimental investigation on the compressive strength of foamed concrete: Effect of curing conditions, cement type, foaming agent and dry density , 2018 .

[23]  C. Arunkumar,et al.  Experimental Study on Mechanical and Thermal Behavior of Foamed Concrete , 2018 .

[24]  W. I. Goh,et al.  Effect of Polypropylene Fibres on the Thermal Conductivity of Lightweight Foamed Concrete , 2018 .

[25]  Zhongwei Liu,et al.  Effect of Water-Cement Ratio on Pore Structure and Strength of Foam Concrete , 2016 .

[26]  Arpad Horvath,et al.  Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20% , 2016 .

[27]  Zhongyuan Lu,et al.  Study on the preparation and properties of high-porosity foamed concretes based on ordinary Portland cement , 2016 .

[28]  Abang Abdullah Abang Ali,et al.  Properties and applications of foamed concrete; a review , 2015 .

[29]  K. Nowak,et al.  Pomiar właściwości cieplnych materiałów budowlanych przy zastosowaniu różnej aparatury pomiarowej – analiza wyników , 2015 .

[30]  Weiqing Liu,et al.  Preparation and characterization of super low density foamed concrete from Portland cement and admixtures , 2014 .

[31]  J. Monzó,et al.  Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires , 2014 .

[32]  D. Panesar.  Cellular concrete properties and the effect of synthetic and protein foaming agents , 2013 .

[33]  Azree Othuman,et al.  Elevated-temperature thermal properties of lightweight foamed concrete , 2011 .

[34]  B. Lothenbach,et al.  Hydration of calcium sulfoaluminate cements — Experimental findings and thermodynamic modelling , 2010 .

[35]  F. Winnefeld,et al.  Concrete produced with calcium sulfoaluminate cement – a potential system for energy and heat storage , 2010 .

[36]  K. Ramamurthy,et al.  A classification of studies on properties of foam concrete , 2009 .

[37]  Martyn Jones,et al.  Behaviour and Assessment of Foamed Concrete for Construction Applications , 2005 .

[38]  Abang Abdullah Abang Ali,et al.  Development of an innovative interlocking load bearing hollow block system in Malaysia , 2004 .