Conversion of residual lithium into fast ionic conductor coating to achieve one-step double modification strategy in LiNi0.8Co0.15Al0.05O2

[1]  W. Li,et al.  Recent progress on the modification of high nickel content NCM: Coating, doping, and single crystallization , 2022, Interdisciplinary Materials.

[2]  T. Brezesinski,et al.  Tailoring the LiNbO 3 coating of Ni-rich cathode materials for stable and high-performance all-solid-state batteries , 2022, Nano Research Energy.

[3]  A. Dou,et al.  Storage degradation mechanism of layered Ni-rich oxide cathode material LiNi0.8Co0.1Mn0.1O2 , 2022, Electrochimica Acta.

[4]  Min‐Sik Park,et al.  Surface Stabilization of Ni-Rich Layered Cathode Materials via Surface Engineering with LiTaO3 for Lithium-Ion Batteries. , 2022, ACS applied materials & interfaces.

[5]  Yu‐Guo Guo,et al.  Chemically converting residual lithium to a composite coating layer to enhance the rate capability and stability of single-crystalline Ni-rich cathodes , 2021, Nano Energy.

[6]  Xifei Li,et al.  Sodium Doping Derived Electromagnetic Center of Lithium Layered Oxide Cathode Materials with Enhanced Lithium Storage , 2021, Nano Energy.

[7]  C. Yoon,et al.  Transition metal-doped Ni-rich layered cathode materials for durable Li-ion batteries , 2021, Nature Communications.

[8]  Zhen-guo Wu,et al.  Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes. , 2021, ACS applied materials & interfaces.

[9]  Xiang Li,et al.  Comprehensive study of tantalum doping on morphology, structure, and electrochemical performance of Ni-rich cathode materials , 2021, Electrochimica Acta.

[10]  Tongchao Liu,et al.  Rational design of mechanically robust Ni-rich cathode materials via concentration gradient strategy , 2021, Nature Communications.

[11]  Yunjian Liu,et al.  An Integrated Surface Coating Strategy to Enhance the Electrochemical Performance of Nickel-rich Layered Cathodes , 2021, Nano Energy.

[12]  Jing Mao,et al.  Lithium-rich manganese-based cathode materials with highly stable lattice and surface enabled by perovskite-type phase-compatible layer , 2021 .

[13]  Yunjian Liu,et al.  Improving the Structure Stability of LiNi0.8Co0.15Al0.05O2 by Double Modification of Tantalum Surface Coating and Doping , 2021, ACS Applied Energy Materials.

[14]  Y. Park,et al.  Comparison of LiTaO3 and LiNbO3 Surface Layers Prepared by Post- and Precursor-Based Coating Methods for Ni-Rich Cathodes of All-Solid-State Batteries. , 2021, ACS applied materials & interfaces.

[15]  Feng Wu,et al.  A Universal Method for Enhancing the Structural Stability of Ni-Rich Cathodes Via the Synergistic Effect of Dual-Element Cosubstitution. , 2021, ACS applied materials & interfaces.

[16]  Feng Wu,et al.  The role of Cu impurity on the structure and electrochemical performance of Ni-rich cathode material for lithium-ion batteries , 2021 .

[17]  Xiaobo Ji,et al.  Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries , 2021 .

[18]  Huiling Zhao,et al.  Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell , 2021 .

[19]  A. Manthiram,et al.  A perspective on single-crystal layered oxide cathodes for lithium-ion batteries , 2021 .

[20]  Wenguang Zhao,et al.  Enhancing the Electrochemical Performance and Structural Stability of Ni-Rich Layered Cathode Materials via Dual-Site Doping. , 2021, ACS applied materials & interfaces.

[21]  Xiaobo Ji,et al.  Demystifying the Lattice Oxygen Redox in Layered Oxide Cathode Materials of Lithium-Ion Batteries. , 2021, ACS nano.

[22]  Z. Wen,et al.  Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification , 2021 .

[23]  Felix H. Richter,et al.  Polycrystalline and Single Crystalline NCM Cathode Materials—Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion , 2021, Advanced Energy Materials.

[24]  Feng Wu,et al.  Roles of fast-ion conductor LiTaO3 modifying Ni-rich cathode material for Li-ion batteries. , 2021, ChemSusChem.

[25]  Jing Lu,et al.  Bulk and surface degradation in layered Ni-rich cathode for Li ions batteries: Defect proliferation via chain reaction mechanism , 2021 .

[26]  Chun Zhan,et al.  Nanowelding to Improve the Chemomechanical Stability of the Ni-Rich Layered Cathode Materials. , 2021, ACS applied materials & interfaces.

[27]  Jyhfu Lee,et al.  Controlling Ni2+ from the Surface to the Bulk by a New Cathode Electrolyte Interphase Formation on a Ni-Rich Layered Cathode in High-Safe and High-Energy-Density Lithium-Ion Batteries. , 2021, ACS applied materials & interfaces.

[28]  Young-Sang Yu,et al.  Cation ordered Ni-rich layered cathode for ultra-long battery life , 2021 .

[29]  Yunjian Liu,et al.  Carbon-coated cation-disordered rocksalt-type transition metal oxide composites for high energy Li-ion batteries , 2021 .

[30]  Huixian Xie,et al.  Effect of Cationic Uniformity in Precursors on Li/Ni Mixing of Ni-Rich Layered Cathodes , 2021 .

[31]  Luchao Yue,et al.  Dual-site lattice modification regulated cationic ordering for Ni-rich cathode towards boosted structural integrity and cycle stability , 2021 .

[32]  I. Takeuchi,et al.  Efficient Experimental Search for Discovering a Fast Li-Ion Conductor from a Perovskite-Type LixLa(1–x)/3NbO3 (LLNO) Solid-State Electrolyte Using Bayesian Optimization , 2020, The Journal of Physical Chemistry C.

[33]  Jason A. Weeks,et al.  Stabilization of a Highly Ni-Rich Layered Oxide Cathode through Flower-Petal Grain Arrays. , 2020, ACS nano.

[34]  Xianwen Wu,et al.  Improved Electrochemical Performance of 0.5Li2MnO3·0.5LiNi0.5Mn0.5O2 Cathode Materials for Lithium Ion Batteries Synthesized by Ionic-Liquid-Assisted Hydrothermal Method , 2020, Frontiers in Chemistry.

[35]  Kyeongjae Cho,et al.  Surface-Dependent Stress-Corrosion Cracking in Ni-Rich Layered Oxide Cathodes , 2020, Acta Materialia.

[36]  C. Yoon,et al.  Author Correction: Heuristic solution for achieving long-term cycle stability for Ni-rich layered cathodes at full depth of discharge , 2020, Nature Energy.

[37]  Shi-guo Xu,et al.  Suppressing structural degradation of Ni-rich cathode materials towards improved cycling stability enabled by a Li2MnO3 coating , 2020, Journal of Materials Chemistry A.

[38]  Dewei Chu,et al.  Synthesis and mechanism of high structural stability of nickel-rich cathode materials by adjusting Li-excess. , 2020, ACS applied materials & interfaces.

[39]  A. Manthiram,et al.  Long-Life, Ultrahigh-Nickel Cathodes with Excellent Air Storage Stability for High-Energy Density Lithium-Based Batteries , 2020 .

[40]  Jiangju Si,et al.  TiO2-coated LiNi0.9Co0.08Al0.02O2 cathode materials with enhanced cycle performance for Li-ion batteries , 2020, Rare Metals.

[41]  Yong Yang,et al.  Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries , 2020, Chemistry of Materials.

[42]  M. Avdeev,et al.  High‐Voltage‐Driven Surface Structuring and Electrochemical Stabilization of Ni‐Rich Layered Cathode Materials for Li Rechargeable Batteries , 2020, Advanced Energy Materials.

[43]  Yong Yang,et al.  Restraining the polarization increase of Ni-rich and low-Co cathodes upon cycling by Al-doping , 2020 .

[44]  Lishan Yang,et al.  Enhancing High-Temperature and High-Voltage Performances of Single-Crystal LiNi0.5Co0.2Mn0.3O2 Cathodes through a LiBO2/LiAlO2 Dual-Modification Strategy , 2020 .

[45]  Xianyou Wang,et al.  Improved the Structure and Cycling Stability of Ni-rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating. , 2020, ACS applied materials & interfaces.

[46]  C. Yuan,et al.  Surface/Interface Structure Degradation of Ni‐Rich Layered Oxide Cathodes toward Lithium‐Ion Batteries: Fundamental Mechanisms and Remedying Strategies , 2019, Advanced Materials Interfaces.

[47]  Yunjiao Li,et al.  Enhancement on structural stability of Ni-rich cathode materials by in-situ fabricating dual-modified layer for lithium-ion batteries , 2019, Nano Energy.

[48]  Siyang Liu,et al.  Enhancing the Cycling Stability of Ni-Rich LiNi0.6Co0.2Mn0.2O2 Cathode at a High Cutoff Voltage with Ta Doping , 2020, ACS Sustainable Chemistry & Engineering.

[49]  Wei Xiang,et al.  Polyanion and cation co-doping stabilized Ni-rich Ni–Co–Al material as cathode with enhanced electrochemical performance for Li-ion battery , 2019, Nano Energy.

[50]  M. Whittingham,et al.  Li-Nb-O coating/substitution enhances the electrochemical performance of LiNi0.8Mn0.1Co0.1O2 (NMC 811) Cathode. , 2019, ACS applied materials & interfaces.

[51]  C. Yoon,et al.  Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteries , 2019, Journal of Materials Chemistry A.

[52]  Jianming Zheng,et al.  Realizing superior cycling stability of Ni-Rich layered cathode by combination of grain boundary engineering and surface coating , 2019, Nano Energy.

[53]  Jaephil Cho,et al.  Oxygen Vacancy Diffusion and Condensation in Lithium-Ion Battery Cathode Materials. , 2019, Angewandte Chemie.

[54]  Feng Wu,et al.  Improving the reversibility of the H2-H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability , 2019, Nano Energy.

[55]  Mingyuan Ge,et al.  Simultaneously Dual Modification of Ni‐Rich Layered Oxide Cathode for High‐Energy Lithium‐Ion Batteries , 2019, Advanced Functional Materials.

[56]  Doron Aurbach,et al.  Structural and Electrochemical Aspects of LiNi0.8Co0.1Mn0.1O2 Cathode Materials Doped by Various Cations , 2019, ACS Energy Letters.

[57]  Haixia Li,et al.  Stabilizing nickel-rich layered oxide cathodes by magnesium doping for rechargeable lithium-ion batteries† †Electronic supplementary information (ESI) available: Experimental section, additional figures, tables as mentioned in the text. See DOI: 10.1039/c8sc03385d , 2018, Chemical science.

[58]  W. Gui,et al.  Anchoring K+ in Li+ Sites of LiNi0.8 Co0.15 Al0.05 O2 Cathode Material to Suppress its Structural Degradation During High-Voltage Cycling , 2018, Energy Technology.

[59]  Qiaobao Zhang,et al.  Improved Cycling Stability of Na-Doped Cathode Materials Li1.2Ni0.2Mn0.6O2 via a Facile Synthesis , 2018, ACS Sustainable Chemistry & Engineering.

[60]  Ru‐Shi Liu,et al.  All-Solid-State Li-Ion Battery Using Li1.5Al0.5Ge1.5(PO4)3 As Electrolyte Without Polymer Interfacial Adhesion , 2018, The Journal of Physical Chemistry C.

[61]  Lei Wang,et al.  The effect of gradient boracic polyanion-doping on structure, morphology, and cycling performance of Ni-rich LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode material , 2018 .

[62]  Jianming Zheng,et al.  Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries , 2017, Nature Communications.

[63]  C. Elsässer,et al.  Lithium Ion Conduction in LiTi2(PO4)3 and Related Compounds Based on the NASICON Structure: A First-Principles Study , 2015 .

[64]  Yangang Sun,et al.  An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer , 2015, Nano Research.