A surprising relation between operating temperature and stability of anion exchange membrane fuel cells

[1]  Thanh Huong Pham,et al.  Highly conductive hydroxide exchange membranes containing fluorene-units tethered with dual pairs of quaternary piperidinium cations , 2021 .

[2]  Dario R. Dekel,et al.  Effect of the Synthetic Method on the Properties of Ni-Based Hydrogen Oxidation Catalysts , 2021, ACS applied energy materials.

[3]  Dario R. Dekel,et al.  Porphyrin Aerogel Catalysts for Oxygen Reduction Reaction in Anion‐Exchange Membrane Fuel Cells , 2021, Advanced Functional Materials.

[4]  Dario R. Dekel,et al.  Crosslinked quaternary phosphonium-functionalized poly(ether ether ketone) polymer-based anion-exchange membranes , 2021 .

[5]  Dario R. Dekel,et al.  An Anion‐Exchange Membrane Fuel Cell Containing Only Abundant and Affordable Materials , 2021, Energy Technology.

[6]  Won Hee Lee,et al.  Poly(Alkyl‐Terphenyl Piperidinium) Ionomers and Membranes with an Outstanding Alkaline‐Membrane Fuel‐Cell Performance of 2.58 W cm−2 , 2020, Angewandte Chemie.

[7]  B. Pivovar,et al.  The alkali degradation of LDPE-based radiation-grafted anion-exchange membranes studied using different ex situ methods , 2020, RSC advances.

[8]  F. Speck,et al.  High Performance FeNC and Mn-oxide/FeNC Layers for AEMFC Cathodes , 2020, Journal of The Electrochemical Society.

[9]  W. Mustain,et al.  Durability challenges of anion exchange membrane fuel cells , 2020, Energy & Environmental Science.

[10]  Dario R. Dekel,et al.  A high-temperature anion-exchange membrane fuel cell , 2020, Journal of Power Sources Advances.

[11]  Dario R. Dekel,et al.  Quantifying the critical effect of water diffusivity in anion exchange membranes for fuel cell applications , 2020 .

[12]  Dario R. Dekel,et al.  Measuring the true hydroxide conductivity of anion exchange membranes , 2020 .

[13]  D. Papageorgopoulos,et al.  Perspective—The Next Decade of AEMFCs: Near-Term Targets to Accelerate Applied R&D , 2020 .

[14]  Dario R. Dekel,et al.  Self-crosslinked blend alkaline anion exchange membranes with bi-continuous phase separated morphology to enhance ion conductivity , 2020 .

[15]  Dario R. Dekel,et al.  Practical ex-Situ Technique To Measure the Chemical Stability of Anion-Exchange Membranes under Conditions Simulating the Fuel Cell Environment , 2020, ACS materials letters.

[16]  Dario R. Dekel,et al.  Effect of CO2 on the properties of anion exchange membranes for fuel cell applications , 2019, Journal of Membrane Science.

[17]  J. W. Park,et al.  Experimental investigation on the performance and durability of hydrogen AEMFC with electrochemical impedance spectroscopy , 2019, International Journal of Energy Research.

[18]  Cy H. Fujimoto,et al.  Alkaline Stability of Quaternized Diels–Alder Polyphenylenes , 2019, Macromolecules.

[19]  P. Kohl,et al.  Composite Poly(norbornene) Anion Conducting Membranes for Achieving Durability, Water Management and High Power (3.4 W/cm2) in Hydrogen/Oxygen Alkaline Fuel Cells , 2019, Journal of The Electrochemical Society.

[20]  Hsiharng Yang,et al.  Cell Temperature and Reactant Humidification Effects on Anion Exchange Membrane Fuel Cells , 2019, 2019 IEEE International Conference on Consumer Electronics - Taiwan (ICCE-TW).

[21]  Dario R. Dekel,et al.  Predicting performance stability of anion exchange membrane fuel cells , 2019, Journal of Power Sources.

[22]  Z. Shao,et al.  Enhanced water transport in AEMs based on poly(styrene–ethylene–butylene–styrene) triblock copolymer for high fuel cell performance , 2019, Polymer Chemistry.

[23]  Cuihong Jin,et al.  Development of a high-performance anion exchange membrane using poly(isatin biphenylene) with flexible heterocyclic quaternary ammonium cations for alkaline fuel cells , 2019, Journal of Materials Chemistry A.

[24]  L. Pant,et al.  Along-the-Channel Impacts of Water Management and Carbon-Dioxide Contamination in Hydroxide-Exchange-Membrane Fuel Cells: A Modeling Study , 2019, Journal of The Electrochemical Society.

[25]  E. Ticianelli,et al.  ETFE-based anion-exchange membrane ionomer powders for alkaline membrane fuel cells: a first performance comparison of head-group chemistry , 2018 .

[26]  W. Mustain,et al.  Nitrogen‐doped Carbon–CoO x Nanohybrids: A Precious Metal Free Cathode that Exceeds 1.0 W cm −2 Peak Power and 100 h Life in Anion‐Exchange Membrane Fuel Cells , 2018, Angewandte Chemie.

[27]  Dario R. Dekel,et al.  Water – A key parameter in the stability of anion exchange membrane fuel cells , 2018, Current Opinion in Electrochemistry.

[28]  Tianshou Zhao,et al.  Advances and challenges in alkaline anion exchange membrane fuel cells , 2018 .

[29]  G. De Lorenzo,et al.  Anion exchange membrane fuel cell modelling , 2018 .

[30]  Dario R. Dekel,et al.  Anion exchange membrane fuel cells: Current status and remaining challenges , 2018 .

[31]  Dario R. Dekel,et al.  The critical relation between chemical stability of cations and water in anion exchange membrane fuel cells environment , 2018 .

[32]  Dario R. Dekel.  Review of cell performance in anion exchange membrane fuel cells , 2018 .

[33]  P. Jannasch,et al.  A practical method for measuring the ion exchange capacity decrease of hydroxide exchange membranes during intrinsic degradation , 2018 .

[34]  Dario R. Dekel,et al.  Steady state and transient simulation of anion exchange membrane fuel cells , 2018 .

[35]  Travis J Omasta,et al.  Importance of balancing membrane and electrode water in anion exchange membrane fuel cells , 2018 .

[36]  A. Herring,et al.  Non-fluorinated pre-irradiation-grafted (peroxidated) LDPE-based anion-exchange membranes with high performance and stability , 2017 .

[37]  S. Rowshanzamir,et al.  A comprehensive study on the stability and ion transport in cross-linked anion exchange membranes based on polysulfone for solid alkaline fuel cells , 2017 .

[38]  Weiguo Song,et al.  High performance anion exchange ionomer for anion exchange membrane fuel cells , 2017 .

[39]  Bruno S. Machado,et al.  Influences of flow direction, temperature and relative humidity on the performance of a representative anion exchange membrane fuel cell: A computational analysis , 2017 .

[40]  Timothy J. Peckham,et al.  Hexamethyl-p-terphenyl poly(benzimidazolium): a universal hydroxide-conducting polymer for energy conversion devices , 2016 .

[41]  Thanh Huong Pham,et al.  Aromatic Polymers Incorporating Bis-N-spirocyclic Quaternary Ammonium Moieties for Anion-Exchange Membranes. , 2015, ACS macro letters.

[42]  Qing Du,et al.  An analytical model for hydrogen alkaline anion exchange membrane fuel cell , 2015 .

[43]  K. Kreuer,et al.  Alkaline stability of quaternary ammonium cations for alkaline fuel cell membranes and ionic liquids. , 2015, ChemSusChem.

[44]  B. Pivovar,et al.  Hydroxide based Benzyltrimethylammonium Degradation: Quantification of Rates and Degradation Technique Development , 2015 .

[45]  Jarrid A. Wittkopf,et al.  Manipulating Water in High-Performance Hydroxide Exchange Membrane Fuel Cells through Asymmetric Humidification and Wetproofing , 2015, Journal of The Electrochemical Society.

[46]  Chulsung Bae,et al.  Mechanistic analysis of ammonium cation stability for alkaline exchange membrane fuel cells , 2014 .

[47]  Plamen Atanassov,et al.  Anion-exchange membranes in electrochemical energy systems , 2014 .

[48]  Qing Du,et al.  Three-dimensional multiphase modeling of alkaline anion exchange membrane fuel cell , 2014 .

[49]  S. Pitchumani,et al.  Preparation and characterization of quaternary ammonium functionalized poly(2,6-dimethyl-1,4-phenylene oxide) as anion exchange membrane for alkaline polymer electrolyte fuel cells , 2014 .

[50]  K. Jiao,et al.  Transient analysis of alkaline anion exchange membrane fuel cell anode , 2013 .

[51]  Dario R. Dekel.  Alkaline Membrane Fuel Cell (AMFC) materials and system improvement - State-of-the-Art , 2013 .

[52]  T. Zhao,et al.  Measurements of water uptake and transport properties in anion-exchange membranes , 2010 .