A seeding device for tissue engineered tubular structures.

One of the challenges in the tissue engineering of tubular tissues and organs is the efficient seeding of porous scaffolds with the desired cell type and density in a short period of time, without affecting cell viability. Though different seeding techniques have been investigated, a fast, reproducible, and efficient bulk seeding method with uniform cellular distribution has yet to be reported. In this paper, a novel seeding device utilizing the synergistic effects of vacuum, centrifugal force and flow has been developed and analyzed. The device allows porous tubular scaffolds to be uniformly bulk seeded as well as luminally surface-seeded with cells. Porous tubular polymer scaffolds were bulk and surface-seeded with cell suspensions, and cell viability and seeding efficiency were subsequently assessed. A rigorous quantitative analysis of shear stresses acting on the cells during the seeding process, and of cell location within the scaffolds following seeding was also performed. Our results showed that the scaffolds were uniformly seeded along the longitudinal and circumferential directions within the tube wall without affecting cell viability or exposing them to excessive shear stresses.

[1]  Jianjun Guan,et al.  Microintegrating smooth muscle cells into a biodegradable, elastomeric fiber matrix. , 2006, Biomaterials.

[2]  A. Remuzzi,et al.  Vascular smooth muscle cells on hyaluronic acid: culture and mechanical characterization of an engineered vascular construct. , 2004, Tissue engineering.

[3]  Shangtian Yang,et al.  Effects of Filtration Seeding on Cell Density, Spatial Distribution, and Proliferation in Nonwoven Fibrous Matrices , 2001, Biotechnology progress.

[4]  Michael Horrocks,et al.  Preparation of porcine carotid arteries for vascular tissue engineering applications. , 2004, Journal of biomedical materials research. Part A.

[5]  F. Kudo,et al.  Differential effects of orbital and laminar shear stress on endothelial cells. , 2005, Journal of vascular surgery.

[6]  R T Tranquillo,et al.  Fibrin as an alternative biopolymer to type-I collagen for the fabrication of a media equivalent. , 2002, Journal of biomedical materials research.

[7]  Tetsuji Yamaoka,et al.  Three‐dimensional cell seeding and growth in radial‐flow perfusion bioreactor for in vitro tissue reconstruction , 2006, Biotechnology and bioengineering.

[8]  Narutoshi Hibino,et al.  Midterm clinical result of tissue-engineered vascular autografts seeded with autologous bone marrow cells. , 2005, The Journal of thoracic and cardiovascular surgery.

[9]  Hiroyuki Honda,et al.  Novel methodology for fabrication of tissue-engineered tubular constructs using magnetite nanoparticles and magnetic force. , 2005, Tissue engineering.

[10]  D. Vorp,et al.  Crosslinking of collagen gels by transglutaminase. , 2004, Journal of biomedical materials research. Part A.

[11]  Michael S Sacks,et al.  Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications. , 2005, Biomaterials.

[12]  D. Loisance,et al.  A new device for endothelial cell seeding of a small-caliber vascular prosthesis. , 2008, Artificial organs.

[13]  Anthony Atala,et al.  Tissue engineering and regenerative medicine: concepts for clinical application. , 2004, Rejuvenation research.

[14]  Takehisa Matsuda,et al.  Human endothelial progenitor cell-seeded hybrid graft: proliferative and antithrombogenic potentials in vitro and fabrication processing. , 2003, Tissue engineering.

[15]  Feng Zhao,et al.  Perfusion bioreactor system for human mesenchymal stem cell tissue engineering: dynamic cell seeding and construct development. , 2005, Biotechnology and bioengineering.

[16]  Johnny Huard,et al.  Identification of a novel population of muscle stem cells in mice , 2002, The Journal of cell biology.

[17]  Tao Xu,et al.  Advances in tissue engineering: cell printing. , 2005, The Journal of thoracic and cardiovascular surgery.

[18]  G. Bowlin,et al.  Electrostatic endothelial cell transplantation within small-diameter (<6 mm) vascular prostheses: a prototype apparatus and procedure. , 1997, Cell transplantation.

[19]  P. V. van Wachem,et al.  Vacuum cell seeding: a new method for the fast application of an evenly distributed cell layer on porous vascular grafts. , 1990, Biomaterials.

[20]  Narutoshi Hibino,et al.  Successful application of tissue engineered vascular autografts: clinical experience. , 2003, Biomaterials.

[21]  Hiroaki Harasaki,et al.  Short Exposure Time Sensitivity of White Cells to Shear Stress , 2003, ASAIO journal.

[22]  William R Wagner,et al.  Fabrication of biodegradable elastomeric scaffolds with sub-micron morphologies. , 2004, Journal of biomedical materials research. Part A.

[23]  J. Fisher,et al.  Tissue engineering of cardiac valves: re-seeding of acellular porcine aortic valve matrices with human mesenchymal progenitor cells. , 2005, The Journal of heart valve disease.

[24]  M. Houška,et al.  Surface immobilized protein multilayers for cell seeding. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[25]  L. Lajtha,et al.  Proliferation of Haemopoietic Stem Cells in Vitro , 1974, British journal of haematology.