Hot Ductility of Severe Plastic Deformed AA6061 Aluminum Alloy

[1]  Bert Verlinden,et al.  Thermo-Mechanical Processing of Metallic Materials , 2014 .

[2]  M. Wan,et al.  Constitutive modeling for high-temperature tensile deformation behavior of pure molybdenum considering strain effects , 2014 .

[3]  Y. Lin,et al.  Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy , 2014 .

[4]  P. Jin,et al.  Hot Deformation Behavior and Workability of (SiCp + Mg2B2O5w)/6061 Al Hybrid and SiCp/6061 Al Composites , 2014, Acta Metallurgica Sinica (English Letters).

[5]  K. Dehghani,et al.  Microstructural homogenization of ECAPed copper through post-rolling , 2013 .

[6]  T. Langdon.  Achieving superplasticity in ultrafine-grained metals , 2013 .

[7]  Y. Lin,et al.  A new phenomenological constitutive model for hot tensile deformation behaviors of a typical Al–Cu–Mg alloy , 2013 .

[8]  Wenjun Liu,et al.  Quantification of compositional and residual stress effects on lattice strain in dual-phase stainless steels by means of differential aperture X-ray micro-diffraction , 2013, Acta Metallurgica Sinica (English Letters).

[9]  K. Dehghani,et al.  Microstructure, texture and mechanical properties of pure copper processed by ECAP and subsequent cold rolling , 2013 .

[10]  R. Mahmudi,et al.  Shear punch superplasticity in equal-channel angularly pressed Mg–12Li–1Zn alloy , 2013 .

[11]  P. Hodgson,et al.  Strength and biaxial formability of cryo-rolled 2024 aluminium subject to concurrent recovery and precipitation , 2013 .

[12]  T. Raghu,et al.  Mechanical Behavior of Commercial Purity Titanium Processed by Equal Channel Angular Pressing Followed by Cold Rolling , 2013, Transactions of the Indian Institute of Metals.

[13]  R. Valiev,et al.  Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing , 2013 .

[14]  R. Valiev,et al.  Effect of cold rolling on microstructure and mechanical properties of copper subjected to ECAP with various numbers of passes , 2012 .

[15]  Dung-An Wang,et al.  Tensile strength and deformation microstructure of Al–Mg–Si alloy sheet by through-width vibration rolling process , 2012 .

[16]  R. Mahmudi,et al.  Hot shear deformation constitutive analysis of an extruded Mg–6Li–1Zn alloy , 2012 .

[17]  O. Sitdikov,et al.  Extraordinary high-strain rate superplasticity of severely deformed Al–Mg–Sc–Zr alloy , 2012 .

[18]  Xin Zhang,et al.  Mechanical and microstructural analysis of 2205 duplex stainless steel under hot working condition , 2012, Journal of Materials Science.

[19]  C. Gür,et al.  Mechanical and microstructural characterization of 6061 aluminum alloy strips severely deformed by Dissimilar Channel Angular Pressing , 2011 .

[20]  R. Alizadeh,et al.  Enhanced superplasticity in equal-channel angularly pressed Sn–5Sb alloy , 2011 .

[21]  K. Dehghani,et al.  Hot deformation behavior of 60Nitinol (Ni60wt%- Ti40wt%) alloy: Experimental and computational studies , 2010 .

[22]  A. Sergueeva,et al.  Gage length and sample size effect on measured properties during tensile testing , 2009 .

[23]  M. Barnett,et al.  Plastic Flow Properties and Microstructural Evolution in an Ultrafine-Grained Al-Mg-Si Alloy at Elevated Temperatures , 2009 .

[24]  W. Kim,et al.  Synthesis of ultra high strength Al–Mg–Si alloy sheets by differential speed rolling , 2009 .

[25]  W. J. Kim,et al.  Enhanced ductility and deformation mechanisms of ultrafine-grained Al―Mg―Si alloy in sheet form at warm temperatures , 2009 .

[26]  T. Langdon,et al.  Achieving superplastic behavior in fcc and hcp metals processed by equal-channel angular pressing , 2008 .

[27]  E. Lavernia,et al.  Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu , 2008 .

[28]  Terence G. Langdon,et al.  Using high-pressure torsion for metal processing: Fundamentals and applications , 2008 .

[29]  W. Kim,et al.  Plastic forming of the equal-channel angular pressing processed 6061 aluminum alloy , 2008 .

[30]  V. Stolyarov,et al.  Influence of post-deformation on CP-Ti processed by equal channel angular pressing , 2008 .

[31]  T. Langdon,et al.  Developing Superplastic Ductilities in Ultrafine-Grained Metals , 2007 .

[32]  W. Soer,et al.  Deformation and reconstruction mechanisms in coarse-grained superplastic Al-Mg alloys , 2006 .

[33]  G. Simons,et al.  Size effects in tensile testing of thin cold rolled and annealed Cu foils , 2006 .

[34]  R. Srinivasan,et al.  A comparison of the properties of SPD-processed AA-6061 by equal-channel angular pressing, multi-axial compressions/forgings and accumulative roll bonding , 2005 .

[35]  Y. Oh,et al.  High-strain-rate superplastic behavior of equal-channel angular-pressed 5083 Al-0.2 wt pct Sc , 2004 .

[36]  V. Stolyarov,et al.  Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling , 2003 .

[37]  T. Nieh,et al.  Effect of liquid phase on superplastic behavior of a modified 6061 aluminum alloy , 2002 .

[38]  J. D. Lee,et al.  Enhancement of strength and superplasticity in a 6061 Al alloy processed by equal-channel-angular-pressing , 2002 .

[39]  T. Nieh,et al.  Effect of Cu and Zr Additions on the Superplastic Behavior of 6061 Aluminum Alloy , 2002 .

[40]  E. Starke,et al.  Particle-stimulated nucleation of recrystallization for grain-size control and superplasticity in an Al-Mg-Si-Cu alloy , 2000 .

[41]  E. Starke,et al.  Microstructural and mechanical characterization of a superplastic 6xxx aluminum alloy , 2000 .

[42]  Taku Sakai,et al.  Hot Deformation of Austenite in a Plain Carbon Steel , 1977 .

[43]  K. Dehghani,et al.  Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases , 2010 .

[44]  R. Cahn.  Pergamon Materials Series , 2007 .

[45]  Howard Kuhn,et al.  Mechanical testing and evaluation , 2000 .

[46]  Joseph R. Davis.  Properties and selection : nonferrous alloys and special-purpose materials , 1990 .