Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring

Piezoelectric wafer active sensors may be applied on aging aircraft structures to monitor the onset and progress of structural damage such as fatigue cracks and corrosion. The state of the art in piezoelectric-wafer active sensors structural health monitoring and damage detection is reviewed. Methods based on (a) elastic wave propagation and (b) the Electro-Mechanical (E/M) impedance technique are cited and briefly discussed. For health monitoring of aging aircraft structures, two main detection strategies are considered: the E/M impedance method for near field damage detection, and wave propagation methods for far-field damage detection. These methods are developed and verified on simple-geometry specimens and on realistic aging aircraft panels with seeded cracks and corrosion. The experimental methods, signal processing, and damage detection algorithms are tuned to the specific method used for structural interrogation. In the E/M impedance method approach, the high-frequency spectrum, representative of the structural resonances, is recorded. Then, overall-statistics damage metrics can be used to compare the impedance signatures and correlate the change in these signatures with the damage progression and intensity. In our experiments, the (1 R2)3 damage metric was found to best fit the results in the 300-450 kHz band. In the wave propagation approach, the pulse-echo and acousto-ultrasonic methods can be utilized to identify the additional reflections generated from crack damage and the changes in transmission phase and velocity associated with corrosion damage. The paper ends with a conceptual design of a structural health monitoring system and suggestions for aging aircraft installation utilizing active-sensor arrays, data concentrators, wireless transmission, and a health monitoring and processing unit.

[1]  Kent L. Lawrence,et al.  Elastic wave generation by piezoceramic patches , 1996 .

[2]  Craig A. Rogers,et al.  Local-area health monitoring of aircraft via piezoelectric actuator/sensor patches , 1995, Smart Structures.

[3]  J. Blitz,et al.  Ultrasonic methods of non-destructive testing , 1996 .

[4]  Craig A. Rogers,et al.  Automated real-time structure health monitoring via signature pattern recognition , 1995, Smart Structures.

[5]  W. E. Lawrie,et al.  Ultrasonic testing of materials: 2nd English Edition, translated from the 3rd German Edition, J. & H. Krautkrämer Springer-Verlag, Berlin, Heidelberg, New York (1977) 667 pp, $65.20, DM 148 , 1978 .

[6]  David C. Zimmerman,et al.  Autonomous structural health monitoring system - A demonstration , 1996 .

[7]  C. Liang,et al.  Coupled Electro-Mechanical Analysis of Adaptive Material Systems-Determination of the Actuator Power Consumption and System Energy Transfer , 1997 .

[8]  Daniel J. Inman,et al.  IMPEDANCE-BASED HEALTH MONITORING OF CIVIL STRUCTURAL COMPONENTS , 2000 .

[9]  Victor Giurgiutiu,et al.  Damage Detection in Simulated Aging-Aircraft Panels Using the Electro-Mechanical Impedance Technique , 2000, Adaptive Structures and Material Systems.

[10]  Zhongwei Jiang,et al.  Longitudinal wave propagation measuring technique for structural health monitoring , 1999, Smart Structures.

[11]  Daniel L. Osmont,et al.  Damage and damaging impact monitoring by PZT sensor-based HUMS , 2000, Smart Structures.

[12]  Peter Cawley,et al.  The impedance method of non-destructive inspection , 1984 .

[13]  I. A. Viktorov.  Rayleigh and Lamb Waves , 1967 .

[14]  Daniel J. Inman,et al.  Feasibility of using impedance‐based damage assessment for pipeline structures , 2001 .

[15]  Suresh Bhalla,et al.  Performance of smart piezoceramic patches in health monitoring of a RC bridge , 2000 .

[16]  Victor Giurgiutiu,et al.  Experimental Investigation of E/M Impedance Health Monitoring for Spot-Welded Structural Joints , 1999 .

[17]  Daniel J. Inman,et al.  An Integrated Health Monitoring Technique Using Structural Impedance Sensors , 2000 .

[18]  Wei Zhao,et al.  Piezoelectric wafer active sensor embedded ultrasonics in beams and plates , 2003 .

[19]  Keith Worden,et al.  Structural damage monitoring based on an actuator-sensor system , 1999, Smart Structures.

[20]  Jeong-Beom Ihn,et al.  Built-In Diagnostics for Monitoring Crack Growth in Aircraft Structures , 2001 .

[21]  Panagiotis Blanas,et al.  Active composite materials as sensing elements for fiber-reinforced smart composite structures , 1998, Smart Structures.

[22]  Daniel J. Inman,et al.  Smart structures health monitoring using artificial neural network , 1999 .

[23]  Leonardo Lecce,et al.  Experimental and Numerical Activities on Damage Detection Using Magnetostrictive Actuators and Statistical Analysis , 2000 .

[24]  John C. Duke.  Acousto-ultrasonics : theory and application , 1988 .

[25]  M. Lemistre,et al.  Damage localization in composite plates using wavelet transform processing on Lamb wave signals , 1999 .

[26]  Xiaomin Deng,et al.  Structural health monitoring using active sensors and wavelet transforms , 1999, Smart Structures.

[27]  Victor Giurgiutiu,et al.  Characterization of Piezoelectric Wafer Active Sensors , 2000 .