Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid

Over the last decade, bioprinting technologies have begun providing important tissue engineering strategies for regenerative medicine and organ transplantation. The major drawback of past approaches has been poor or inadequate material-printing device and substrate combinations, as well as the relatively small size of the printed construct. Here, we hypothesise that cell-laden hydrogels can be printed when submerged in perfluorotributylamine (C(12)F(27)N), a hydrophobic high-density fluid, and that these cells placed within three-dimensional constructs remain viable allowing for cell proliferation and production of extracellular matrix. Human mesenchymal stem cells and MG-63 cells were encapsulated into agarose hydrogels, and subsequently printed in high aspect ratio in three dimensional structures that were supported in high density fluorocarbon. Three-dimensional structures with various shapes and sizes were manufactured and remained stable for more than six months. Live/dead and DAPI stainings showed viable cells 24 h after the printing process, as well as after 21 days in culture. Histological and immunohistochemical analyses after 14 and 21 days revealed viable cells with marked matrix production and signs of proliferation. The compressive strength values of the printed gels consequently increased during the two weeks in culture, revealing encouraging results for future applications in regenerative medicine.

[1]  F. Gollan,et al.  Survival of Mammals Breathing Organic Liquids Equilibrated with Oxygen at Atmospheric Pressure , 1966, Science.

[2]  B. Yates,et al.  Survival and histopathologic changes in lungs of hamsters following synthetic liquid breathing. , 1970, Federation proceedings.

[3]  J. Modell,et al.  Long-term survival of dogs after breathing oxygenated fluorocarbon liquid. , 1970, Federation proceedings.

[4]  P. Benya,et al.  Dedifferentiated chondrocytes reexpress the differentiated collagen phenotype when cultured in agarose gels , 1982, Cell.

[5]  J. Vacanti,et al.  Tissue engineering : Frontiers in biotechnology , 1993 .

[6]  C. Bowman,et al.  Mechanical properties of hydrogels and their experimental determination. , 1996, Biomaterials.

[7]  K. Lowe,et al.  Perfluorochemicals: their applications and benefits to cell culture. , 1998, Trends in biotechnology.

[8]  D. Odde,et al.  Laser-guided direct writing of living cells. , 2000, Biotechnology and bioengineering.

[9]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[10]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[11]  Rainer Schmelzeisen,et al.  Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques , 2002 .

[12]  C. Rappaport,et al.  Review—Progress in concept and practice of growing anchorage-dependent mammalian cells in three dimension , 2003, In Vitro Cellular & Developmental Biology - Animal.

[13]  Neelesh A. Patankar,et al.  On the Modeling of Hydrophobic Contact Angles on Rough Surfaces , 2003 .

[14]  Farshid Guilak,et al.  Chondrogenic differentiation of adipose-derived adult stem cells in agarose, alginate, and gelatin scaffolds. , 2004, Biomaterials.

[15]  I. Morita,et al.  Biocompatible inkjet printing technique for designed seeding of individual living cells. , 2005, Tissue engineering.

[16]  Tao Xu,et al.  Advances in tissue engineering: cell printing. , 2005, The Journal of thoracic and cardiovascular surgery.

[17]  T. Boland,et al.  Inkjet printing of viable mammalian cells. , 2005, Biomaterials.

[18]  D. Prockop,et al.  Minimal criteria for defining multipotent mesenchymal stromal cells. The International Society for Cellular Therapy position statement. , 2006, Cytotherapy.

[19]  Xiaofeng Cui,et al.  Application of inkjet printing to tissue engineering , 2006, Biotechnology journal.

[20]  Hod Lipson,et al.  Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries , 2022 .

[21]  Ginger S Withers,et al.  New ways to print living cells promise breakthroughs for engineering complex tissues in vitro. , 2006, The Biochemical journal.

[22]  G McHale,et al.  Cassie and Wenzel: were they really so wrong? , 2007, Langmuir : the ACS journal of surfaces and colloids.

[23]  Sarit B. Bhaduri,et al.  Drop-on-demand printing of cells and materials for designer tissue constructs , 2007 .

[24]  W. Hennink,et al.  Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing. , 2007, Tissue engineering.

[25]  P. Calvert.  Printing Cells , 2007, Science.

[26]  Thomas P. Lozito,et al.  Human mesenchymal stem cells express vascular cell phenotypes upon interaction with endothelial cell matrix , 2009, Journal of cellular biochemistry.

[27]  R. Schneider,et al.  The role of biomaterials in the direction of mesenchymal stem cell properties and extracellular matrix remodelling in dermal tissue engineering. , 2010, Biomaterials.

[28]  Nan Ma,et al.  Laser printing of skin cells and human stem cells. , 2010, Tissue engineering. Part C, Methods.

[29]  J. Drelich,et al.  Superhydrophilic and superwetting surfaces: definition and mechanisms of control. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[30]  David J. Mooney,et al.  Harnessing Traction-Mediated Manipulation of the Cell-Matrix Interface to Control Stem Cell Fate , 2010, Nature materials.

[31]  P. Zandstra,et al.  The use of vascular endothelial growth factor functionalized agarose to guide pluripotent stem cell aggregates toward blood progenitor cells. , 2010, Biomaterials.

[32]  Vladimir Mironov,et al.  Towards organ printing: engineering an intra-organ branched vascular tree , 2010, Expert opinion on biological therapy.

[33]  Esther Novosel,et al.  Vascularization is the key challenge in tissue engineering. , 2011, Advanced drug delivery reviews.

[34]  Shintaroh Iwanaga,et al.  Three-dimensional inkjet biofabrication based on designed images , 2011, Biofabrication.

[35]  Andres Hilfiker,et al.  Mesenchymal stem cells and progenitor cells in connective tissue engineering and regenerative medicine: is there a future for transplantation? , 2011, Langenbeck's Archives of Surgery.

[36]  S. Powis,et al.  Use of Perfluorodecalin for Pancreatic Islet Culture Prior to Transplantation: A Liquid-Liquid Interface Culture System—Preliminary Report , 2011, Cell transplantation.

[37]  T. Hirth,et al.  Preparation and characterisation of dry thin native protein trehalose films on titanium-coated cyclo-olefin polymer (COP) foil generated by spin-coating/drying process and applied for protein transfer by Laser-Induced-Forward Transfer (LIFT) , 2011 .

[38]  Arnold Gillner,et al.  Fabrication of 2D protein microstructures and 3D polymer–protein hybrid microstructures by two-photon polymerization , 2011, Biofabrication.

[39]  Vladimir Mironov,et al.  Organ printing: from bioprinter to organ biofabrication line. , 2011, Current opinion in biotechnology.

[40]  David T Corr,et al.  Gelatin-based laser direct-write technique for the precise spatial patterning of cells. , 2011, Tissue engineering. Part C, Methods.

[41]  S. Soker,et al.  Cell and organ bioengineering technology as applied to gastrointestinal diseases , 2012, Gut.

[42]  H. Fischer,et al.  Supporting Biomaterials for Articular Cartilage Repair , 2012, Cartilage.