Development and evaluation of vibration isolators for reducing hand transmitted vibration of walking and riding type power tillers.

The presence of a large number of small holdings in India has rendered the power tiller to be the most suitable farm equipment, in view of its compact size and versatility. Continuous use of the power tiller can involve the risk of vascular disorders of the hands even after relatively short periods under usual working conditions and the results suggest that it is necessary to reduce the vibration transmitted to the user's hands by providing adequate insulating systems. In this study, new types of vibration isolators for engine, handle bar and handle were developed to increase the safe exposure level of operators by reducing the vibration transmitted to the hands. Combined effect of the three stages of reduction in vibration was measured and analysed to know the reduction of machine vibration in walking and riding type power tillers at stationary condition. The results indicated that provision of vibration isolators reduced handle vibration by 50–60%. The effectiveness of vibration isolators in reducing the hand transmitted vibration (HTV) was also investigated during rototilling in untilled as well as tilled fields and in transport mode on farm and bitumen roads based on ISO standard ( ISO, 2001a , ISO, 2001b ). HTV was reduced from 4.55 m s−2 to 3.18 m s−2 for walking type whereas for riding type, it was reduced from 4.24 m s−2 to 2.85 m s−2 after incorporating vibration isolators during rototilling. Vibration transmitted to the hand was significantly reduced from 3.96 m s−2 to 2.67 m s−2 at 5 km h−1 in the transport mode of power tiller. The risk of vibration-induced white finger was prolonged from 5 years to 9 years in the case of rototilling at the forward speed of 2.4 km h−1, 7 years to 11 years during transport at the forward speed of 5.0 km h−1 respectively for the 10% of operators if the power tiller is used 8 h day−1. On mounting the vibration isolators, daily exposure limit was increased from

[1]  M. Daikoku,et al.  Hand-transmitted vibration reduction of agricultural machinery (Part 2). Design of vibration-isolating handle. , 1990 .

[2]  K. Kathirvel,et al.  Vibration Characteristics of Walking and Riding Type Power Tillers , 2006 .

[3]  Michael J Griffin,et al.  The diagnosis of disorders caused by hand-transmitted vibration: Southampton Workshop 2000 , 2002, International archives of occupational and environmental health.

[4]  Michael J. Griffin,et al.  A review of the effects of vibration on visual acuity and continuous manual control, part I: Visual acuity , 1978 .

[5]  E. Grandjean,et al.  Fitting the task to the man: An ergonomic approach , 1980 .

[6]  Qing-zu Su,et al.  Dynamic Modification Applied to the Design of the Handle of a Walking Tractor , 1988 .

[7]  M. Daikoku,et al.  Hand-transmitted vibration reduction of agricultural machinery (Part 1). Simulation method for vibration reduction. , 1990 .

[8]  Yibin Ying,et al.  Vibratory characteristics and hand-transmitted vibration reduction of walking tractor , 1998 .

[9]  Etienne Grandjean,et al.  Fitting the Task to the Man: A Textbook of Occupational Ergonomics , 1988 .

[10]  Michael J Griffin,et al.  Measurement, evaluation, and assessment of peripheral neurological disorders caused by hand-transmitted vibration , 2008, International archives of occupational and environmental health.

[11]  Vlado Goglia,et al.  Influence on operator's health of hand-transmitted vibrations from handles of a single-axle tractor. , 2006, Annals of agricultural and environmental medicine : AAEM.

[12]  Michael J. Griffin,et al.  A review of the effects of vibration on visual acuity and continuous manual control, part II: Continuous manual control , 1978 .