Emulation of Frequency and Mode Shape Variation of As-manufactured Airfoils with Eigenvalue Veering and Crossing

[1]  Joseph A. Beck,et al.  Component-Mode Reduced-Order Models for Geometric Mistuning of Integrally Bladed Rotors , 2013 .

[2]  Bogdan I. Epureanu,et al.  Reduced-Order Models of Blisks With Small Geometric Mistuning , 2017 .

[3]  E. Dowell,et al.  Localization of vibrations by structural irregularity , 1987 .

[4]  J. Griffin,et al.  Frequency Veering Effects on Mistuned Bladed Disk Forced Response , 2003 .

[5]  Joseph A. Beck,et al.  Probabilistic Mistuning Assessment Using Nominal and Geometry Based Mistuning Methods , 2013 .

[6]  Ernesto Benini,et al.  Surrogate-Based Shape Optimization of Stall Margin and Efficiency of a Centrifugal Compressor , 2015 .

[7]  Joseph A. Beck,et al.  Mistuned Rotor Reduced Order Modeling with Surrogate-Modeled Airfoil Substructures , 2017 .

[8]  P. Sagaut,et al.  Building Efficient Response Surfaces of Aerodynamic Functions with Kriging and Cokriging , 2008 .

[9]  Jerry H. Griffin,et al.  Sensitivity of Tuned Bladed Disk Response to Frequency Veering , 2005 .

[10]  Karen Willcox,et al.  Engineering Design with Digital Thread , 2018 .

[11]  Scott Bland,et al.  Mode-Tracking in Surrogate-Based Inverse Identification of Rotor Blade Geometry Using Campbell Diagram , 2016 .

[12]  Alok Sinha.  Reduced-Order Model of a Bladed Rotor With Geometric Mistuning , 2009 .

[13]  Alok Sinha,et al.  Vibratory Parameters of Blades From Coordinate Measurement Machine Data , 2008 .

[14]  Jerry H. Griffin,et al.  Maximum Bladed Disk Forced Response From Distortion of a Structural Mode , 2003 .

[15]  Joseph A. Beck,et al.  Uncertainties of an Automated Optical 3D Geometry Measurement, Modeling, and Analysis Process for Mistuned Integrally Bladed Rotor Reverse Engineering , 2013 .

[16]  Ramana V. Grandhi,et al.  Probabilistic Analysis of Geometric Uncertainty Effects on Blade-Alone Forced Response , 2004 .

[17]  Jerry H. Griffin,et al.  A Reduced-Order Model of Mistuning Using a Subset of Nominal System Modes , 2001 .

[18]  Matthew P. Castanier,et al.  Modeling and Analysis of Mistuned Bladed Disk Vibration: Status and Emerging Directions , 2006 .

[19]  W. J. Anderson,et al.  Mode Tracking Issues in Structural Optimization , 1995 .

[20]  Joseph A. Beck,et al.  Experimental Validation of an Optically Measured Geometric Mistuning Model Using a System ID Approach , 2015 .

[21]  Albert J. Sanders,et al.  Experimental Investigation of Rotor-Inlet Guide Vane Interactions in Transonic Axial-Flow Compressor , 2000 .

[22]  A. V. Srinivasan,et al.  Flutter and Resonant Vibration Characteristics of Engine Blades , 1997 .

[23]  Mark Blackburn,et al.  DEMONSTRATED BENEFITS OF A NASCENT DIGITAL TWIN , 2018 .

[24]  T. Ting,et al.  An automated mode tracking strategy (dynamic structural analysis of helicopter structures) , 1995 .

[25]  Jeffrey M. Brown,et al.  A Fleet Risk Prediction Methodology for Mistuned IBRs using Geometric Mistuning Models , 2015 .

[26]  Ramana V. Grandhi,et al.  Probabilistic Analysis of Geometric Uncertainty Effects on Blade Modal Response , 2003 .

[27]  Joseph A. Beck,et al.  Experimental Validation of a Mesh Quality Optimized Morphed Geometric Mistuning Model , 2015 .

[28]  David L. Darmofal,et al.  Impact of Geometric Variability on Axial Compressor Performance , 2003 .

[29]  Christophe Pierre,et al.  A reduced-order modeling technique for mistuned bladed disks , 1994 .

[30]  Alok Sinha,et al.  Reduced Order Modeling of a Bladed Rotor With Geometric Mistuning Via Estimated Deviations in Mass and Stiffness Matrices , 2013 .

[31]  Joseph A. Beck,et al.  Automated Finite Element Model Mesh Updating Scheme Applicable to Mistuning Analysis , 2014 .

[32]  Daniel L. Gillaugh,et al.  Accurate Strain Gauge Limits Through Geometry Mistuning Modeling , 2018, Journal of Propulsion and Power.

[33]  Andy J. Keane,et al.  Preliminary fan-blade design using intermediate response approximations , 2004 .

[34]  Ammon Hepworth,et al.  Rapid Visualization of Compressor Blade Finite Element Models Using Surrogate Modeling , 2018, Volume 7A: Structures and Dynamics.

[35]  C. Pierre.  Mode localization and eigenvalue loci veering phenomena in disordered structures , 1988 .

[36]  Kwang-Yong Kim,et al.  Multiple surrogate modeling for axial compressor blade shape optimization , 2008 .

[37]  A. Leissa.  On a curve veering aberration , 1974 .

[38]  Wei Shyy,et al.  Shape optimization of supersonic turbines using global approximation methods , 2002 .