Magnetic Properties of FeNi3 Nanoparticle Modified Pinus radiata Wood Nanocomposites

Magnetic FeNi3 nanoparticles were synthesized in the internal structure of wood through an in situ fabrication approach. The morphology, crystalline phase and chemical composition of the FeNi3 modified wood was investigated by X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS). SEM confirmed that the magnetic nanoparticles were densely dispersed in the wood matrix. The magnetic hysteresis loops showed that the magnetism of composites is dependent on the amount of FeNi3 loading. The saturation magnetization of magnetic wood increases from 6.3 to 10.8 emu/g with an increase of FeNi3 loading from 12 to 18 wt %. Furthermore, magnetic wood showed significant directional dependence. The presented work will provide a feasible pathway for producing wood composite products.

[1]  S. Cha,et al.  Effect of Chemical Modification on Mechanical Properties of Wood-Plastic Composite Injection-Molded Parts , 2018, Polymers.

[2]  Wei-hong Wang,et al.  Ultraviolet Weathering Performance of High-Density Polyethylene/Wood-Flour Composites with a Basalt-Fiber-Included Shell , 2018, Polymers.

[3]  Jyh-Horng Wu,et al.  Effect of SiO2 Content on the Extended Creep Behavior of SiO2-Based Wood-Inorganic Composites Derived via the Sol-Gel Process Using the Stepped Isostress Method , 2018, Polymers.

[4]  Xiaojun Ma,et al.  Synthesis and Characterization of Wooden Magnetic Activated Carbon Fibers with Hierarchical Pore Structures , 2018, Polymers.

[5]  Jun He,et al.  Optimized microwave magnetic characteristics for patterned FeNi nanoparticle films manufactured by electric field-assisted deposition , 2018 .

[6]  Qingfeng Sun,et al.  Hydrothermal Synthesis of Nanooctahedra MnFe2O4 onto the Wood Surface with Soft Magnetism, Fire Resistance and Electromagnetic Wave Absorption , 2017, Nanomaterials.

[7]  Jingfei Liu,et al.  Acoustic Wood anomaly in transmitted diffraction field , 2017 .

[8]  Jingwu Zheng,et al.  Enhanced and broadband microwave absorption of flake-shaped Fe and FeNi composite with Ba ferrites , 2017 .

[9]  Qingfeng Sun,et al.  Biomimetic taro leaf-like films decorated on wood surfaces using soft lithography for superparamagnetic and superhydrophobic performance , 2017, Journal of Materials Science.

[10]  Wentao Gan,et al.  Transparent magnetic wood composites based on immobilizing Fe3O4 nanoparticles into a delignified wood template , 2017, Journal of Materials Science.

[11]  H Zhao,et al.  The effect of transverse magnetic field treatment on wave-absorbing properties of FeNi alloy powders , 2017 .

[12]  Andrey V. Svalov,et al.  Magnetoimpedance of FeNi-based asymmetric sensitive elements , 2016 .

[13]  Huifeng Li,et al.  FeNi3 alloy nanocrystals grown on graphene: Controllable synthesis, in-depth characterization and enhanced electromagnetic performance , 2016 .

[14]  G. Mantanis,et al.  Biological resistance of pine wood treated with nano-sized zinc oxide and zinc borate against brown-rot fungi , 2016, European Journal of Wood and Wood Products.

[15]  Jianzhang Li,et al.  Combined treatment for conversion of fast-growing poplar wood to magnetic wood with high dimensional stability , 2016, Wood Science and Technology.

[16]  A. Enayati,et al.  Use of amino silane coupling agent to improve physical and mechanical properties of UF-bonded wheat straw (Triticum aestivum L.) poplar wood particleboard , 2016, Journal of Forestry Research.

[17]  Y. Liu,et al.  The Magnetic, Mechanical, Thermal Properties and Uv Resistance of CoFe2O4/SiO2-Coated Film on Wood , 2016 .

[18]  Li Wang,et al.  Preparation of corrosion-resistant, EMI shielding and magnetic veneer-based composite via Ni–Fe–P alloy deposition , 2015, Journal of Materials Science: Materials in Electronics.

[19]  A. A. Chlenova,et al.  FeNi-based flat magnetoimpedance nanostructures with open magnetic flux: New topological approaches , 2015 .

[20]  Wentao Gan,et al.  Hydrothermal synthesis of magnetic wood composites and improved wood properties by precipitation with CoFe2O4/hydroxyapatite , 2015 .

[21]  Yingying Li,et al.  Fabrication of magnetic response composite based on wood veneers by a simple in situ synthesis method , 2015, Wood Science and Technology.

[22]  P. Ripka,et al.  Electroplated FeNi ring cores for fluxgates with field induced radial anisotropy , 2015 .

[23]  Stacy M. Trey,et al.  Controlled deposition of magnetic particles within the 3-D template of wood: making use of the natural hierarchical structure of wood , 2014 .

[24]  I. Burgert,et al.  Hybrid wood materials with magnetic anisotropy dictated by the hierarchical cell structure. , 2014, ACS applied materials & interfaces.

[25]  B. N. Ugolev.  Wood as a natural smart material , 2014, Wood Science and Technology.

[26]  H. Guan,et al.  In situ preparation and magnetic properties of Fe3O4/wood composite , 2012 .

[27]  Bernard Thibaut,et al.  Anisotropy of wood vibrational properties: dependence on grain angle and review of literature data , 2011, Wood Science and Technology.

[28]  H. Oka,et al.  Electromagnetic Wave Absorption Characteristics of Half Carbonized Powder-Type Magnetic Wood , 2011, IEEE Transactions on Magnetics.

[29]  M. Sancelme,et al.  Enhancing atrazine biodegradation by Pseudomonas sp. strain ADP adsorption to Layered Double Hydroxide bionanocomposites. , 2011, Journal of hazardous materials.

[30]  G. Qiu,et al.  Synthesis and Magnetic Properties of Fe–Ni Alloy Nanoparticles Obtained by Hydrothermal Reaction , 2011 .

[31]  Y. Nishio,et al.  Preparation of Thermoplastic Magnetic Wood via Etherification and In-Situ Synthesis of Iron Oxide , 2010 .

[32]  Andrea R. Gerson,et al.  Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn , 2010 .

[33]  Andrea Polle,et al.  FTIR spectroscopy, chemical and histochemical characterisation of wood and lignin of five tropical timber wood species of the family of Dipterocarpaceae , 2010, Wood Science and Technology.

[34]  W. Focke,et al.  Mn2Al-LDH- and Co2Al-LDH-stearate as photodegradants for LDPE film , 2009 .

[35]  J. Johnston,et al.  Novel hybrid materials of magnetic nanoparticles and cellulose fibers. , 2009, Journal of colloid and interface science.

[36]  K. Paknikar,et al.  Iron-nickel bimetallic nanoparticles for reductive degradation of azo dye Orange G in aqueous solution , 2008 .

[37]  W. Pan,et al.  Electrospinning of Fe, Co, and Ni Nanofibers: Synthesis, Assembly, and Magnetic Properties , 2007 .

[38]  G. Liang,et al.  Synthesis and characterization of magnetic FeNi3 particles obtained by hydrazine reduction in aqueous solution , 2007 .

[39]  S. Ehrman,et al.  Synthesis of iron nanoparticles via chemical reduction with palladium ion seeds. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[40]  R. Hong,et al.  Preparation, characterization and application of bilayer surfactant-stabilized ferrofluids , 2006 .

[41]  Shang-Tzen Chang,et al.  Modification of wood with isopropyl glycidyl ether and its effects on decay resistance and light stability. , 2006, Bioresource technology.

[42]  H. Oka,et al.  Experimentally study on electromagnetic wave absorbing control of coating-type magnetic wood using a grooving process , 2005, INTERMAG Asia 2005. Digests of the IEEE International Magnetics Conference, 2005..

[43]  H. Oka,et al.  Manufacturing methods and magnetic characteristics of magnetic wood , 2004 .

[44]  H. Oka,et al.  Experimental study on actuation functions of coating-type magnetic wood , 2004 .

[45]  C. Biesingera,et al.  esolving surface chemical states in XPS analysis of first row transition metals , xides and hydroxides : Cr , Mn , Fe , 2010 .