Multiwalled carbon nanotube based aromatic volatile organic compound sensor: sensitivity enhancement through 1-hexadecanethiol functionalisation

Aromatic volatile organic compound (VOC) sensors are attracting growing interest as a response to the pressing market need for sensitive, fast response, low power consumption and stable sensors. Benzene and toluene detection is subject to several potential applications such as air monitoring in chemical industries or even biosensing of human breath. In this work, we report the fabrication of a room temperature toluene and benzene sensor based on multiwall carbon nanotubes (MWCNTs) decorated with gold nanoparticles and functionalised with a long-chain thiol self-assembled monolayer, 1-hexadecanethiol (HDT). High-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared spectroscopy (FTIR) were performed to characterize the gold nanoparticle decoration and to examine the thiol monolayer bonding to the MWCNTs. The detection of aromatic vapours using Au-MWCNT and HDT/Au-MWCNT sensors down to the ppm range shows that the presence of the self-assembled layer increases the sensitivity (up to 17 times), selectivity and improves the response dynamics of the sensors.

[1]  Tamás Igricz,et al.  Decoration of Vertically Aligned Carbon Nanotubes with Semiconductor Nanoparticles Using Atomic Layer Deposition , 2019, Materials.

[2]  C. Bittencourt,et al.  Hydrophilicity and carbon chain length effects on the gas sensing properties of chemoresistive, self-assembled monolayer carbon nanotube sensors , 2019, Beilstein journal of nanotechnology.

[3]  Yu Ying,et al.  Nanomaterial-based gas sensors: A review , 2018 .

[4]  Laurent Spinelle,et al.  Review of Portable and Low-Cost Sensors for the Ambient Air Monitoring of Benzene and Other Volatile Organic Compounds , 2017, Sensors.

[5]  Eduard Llobet,et al.  MHDA-Functionalized Multiwall Carbon Nanotubes for detecting non-aromatic VOCs , 2016, Scientific Reports.

[6]  Jean-Louis Marty,et al.  One Step Assembly of Thin Films of Carbon Nanotubes on Screen Printed Interface for Electrochemical Aptasensing of Breast Cancer Biomarker , 2016, Sensors.

[7]  W. Ensinger,et al.  Electroless synthesis of cellulose-metal aerogel composites , 2016 .

[8]  Sung Yong Kang,et al.  Selective detection of low concentration toluene gas using Pt-decorated carbon nanotubes sensors , 2016 .

[9]  Jian Song,et al.  Preparation and Gas Sensing Properties of In2O3/Au Nanorods for Detection of Volatile Organic Compounds in Exhaled Breath , 2015, Scientific Reports.

[10]  V. Aroutiounian,et al.  P8.3 - Study of MWCNT/SnO2 Nanocomposite Acetone and Toluene Vapor Sensors , 2015 .

[11]  E. Llobet,et al.  Rhodium-decorated MWCNTs for detecting organic vapours , 2015 .

[12]  Eduard Llobet,et al.  Pt- and Pd-decorated MWCNTs for vapour and gas detection at room temperature , 2015, Beilstein journal of nanotechnology.

[13]  Y. Yoo,et al.  Single-carbon discrimination by selected peptides for individual detection of volatile organic compounds , 2015, Scientific Reports.

[14]  Eduard Llobet,et al.  Iron oxide and oxygen plasma functionalized multi-walled carbon nanotubes for the discrimination of volatile organic compounds , 2014 .

[15]  Qingzhong Li,et al.  Is there an attractive interaction between two methyl groups , 2014 .

[16]  Hossam Haick,et al.  Assessment, origin, and implementation of breath volatile cancer markers. , 2014, Chemical Society reviews.

[17]  E. Llobet,et al.  Multi-walled carbon nanotubes for volatile organic compound detection , 2013 .

[18]  E. Llobet,et al.  Functionalised multi–walled carbon nanotubes for chemical vapour detection , 2013 .

[19]  C. Bittencourt,et al.  Functionalization of vertically aligned carbon nanotubes , 2013, Beilstein journal of nanotechnology.

[20]  M. Temperini,et al.  SERS performance of gold nanotubes obtained by sputtering onto polycarbonate track-etched membranes. , 2013, Physical chemistry chemical physics : PCCP.

[21]  E. Llobet,et al.  Gas sensing with Au-decorated carbon nanotubes. , 2011, ACS nano.

[22]  D. Castner,et al.  Multi-technique Characterization of Self-assembled Carboxylic Acid Terminated Alkanethiol Monolayers on Nanoparticle and Flat Gold Surfaces. , 2011, The journal of physical chemistry. C, Nanomaterials and interfaces.

[23]  C. Wöll,et al.  Self-assembled monolayers of benzylmercaptan and para-cyanobenzylmercaptan on gold: surface infrared spectroscopic characterization. , 2010, Physical chemistry chemical physics : PCCP.

[24]  Yun Wang,et al.  A Review of Carbon Nanotubes-Based Gas Sensors , 2009, J. Sensors.

[25]  Wenhui Zhang,et al.  Carbon Nanotubes as Active Components for Gas Sensors , 2009, J. Sensors.

[26]  Tomoaki Ikegami,et al.  Fabrication and characterization of carbon nanotube based high sensitive gas sensors operable at room temperature , 2008 .

[27]  Eduard Llobet,et al.  Metal-decorated multi-wall carbon nanotubes for low temperature gas sensing , 2007 .

[28]  Jose Maria Kenny,et al.  Highly sensitive and selective sensors based on carbon nanotubes thin films for molecular detection , 2004 .

[29]  M. Meyyappan,et al.  Carbon Nanotube Sensors for Gas and Organic Vapor Detection , 2003 .

[30]  Zettl,et al.  Extreme oxygen sensitivity of electronic properties of carbon nanotubes , 2000, Science.

[31]  Saad A. Khan,et al.  Real-Time FTIR and in Situ Rheological Studies on the UV Curing Kinetics of Thiol-ene Polymers , 1997 .

[32]  N. Jaffrezic‐Renault,et al.  Study of self-assembled monolayers of n-alkanethiol on a surface plasmon resonance fibre optic sensor , 1996 .

[33]  E. Llobet,et al.  RF sputtering as a tool for plasma treating and metal decoration , 2011 .