Improvement of the Adhesion Strength of MoSi2-ZrB2 Coating by Optimizing Particle Spraying and Subsequent Heat Treatment

[1]  S. Zwaag,et al.  On the use of B-alloyed MoSi2 particles as crack healing agents in yttria stabilized zirconia thermal barrier coatings , 2015 .

[2]  Hejun Li,et al.  Microstructure and oxidation behavior of C/C–ZrB2–SiC composites coated with SiC coating at high temperature , 2015 .

[3]  A. L. Ortiz,et al.  Contact-mechanical properties at intermediate temperatures of ZrB2 ultra-high-temperature ceramics pressureless sintered with Mo, Ta, or Zr disilicides , 2015 .

[4]  Sudarshan Kumar,et al.  Solution Precursor Plasma Spray (SPPS) technique of catalyst coating for hydrogen production in a single channel with cavities plate type methanol based microreformer , 2015 .

[5]  Z. Han,et al.  Particle in-flight behavior and its influence on the microstructure and properties of supersonic-atmospheric-plasma-sprayed nanostructured thermal barrier coatings , 2015 .

[6]  G. Montavon,et al.  Study of metallic powder behavior in very low pressure plasma spraying (VLPPS) — Application to the manufacturing of titanium–aluminum coatings , 2015 .

[7]  Ying Wang,et al.  Oxidation protection of carbon/carbon composites with a plasma-sprayed ZrB2–SiC–Si/Yb2SiO5/LaMgAl11O19 coating during thermal cycling , 2015 .

[8]  Hejun Li,et al.  Effect of pre-oxidation on the ablation resistance of ZrB2–SiC coating for SiC-coated carbon/carbon composites , 2015 .

[9]  Kun Liu,et al.  Particle in-flight behavior and its influence on the microstructure and mechanical property of plasma sprayed La2Ce2O7 thermal barrier coatings , 2015 .

[10]  M. Sohi,et al.  Effect of bond coat and post-heat treatment on the adhesion of air plasma sprayed WC-Co coatings , 2015 .

[11]  Hejun Li,et al.  Preparation of oxidation protective ZrB2-SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites , 2014 .

[12]  Hejun Li,et al.  Oxidation and Mechanical Properties of SiC/SiC–MoSi2–ZrB2 Coating for Carbon/Carbon Composites , 2014 .

[13]  William E Lee,et al.  Toward Oxidation-Resistant ZrB2-SiC Ultra High Temperature Ceramics , 2011 .

[14]  T. Clyne,et al.  Effects of Impurity Content on the Sintering Characteristics of Plasma-Sprayed Zirconia , 2007 .

[15]  D. Chicot,et al.  Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness , 2007 .

[16]  Donald M. Curry,et al.  Oxidation microstructure studies of reinforced carbon/carbon , 2006 .

[17]  Xiaohong Shi,et al.  Silicon carbide coating to protect carbon/carbon composites against oxidation , 2005 .

[18]  D. Sciti,et al.  Oxidation behavior of a pressureless sintered ZrB_2–MoSi_2 ceramic composite , 2005 .

[19]  F. Azarmi.  Vacuum plasma spraying , 2005 .

[20]  Christopher C. Berndt,et al.  The Adhesion of Flame and Plasma Spray Coatings , 1980 .