Temperature-Insensitive Refractive Index Sensor with Etched Microstructure Fiber

A Mach–Zehnder interferometer (MZI) based on an etched all-solid microstructure fiber (MOF) has been demonstrated. The MZI works on the basis of interference between the vibrant core and cladding modes in the MOF. The all-solid MOF has a heterostructure cladding composed of Ge-doped rod arrays and pure silica, and thus can support and propagate a vibrant cladding mode with a large mode area. When the outermost cladding of MOF is etched, the cladding mode becomes sensitive to the ambient refractive index (RI). The etched MOF can work as a sensing head for RI sensing. By comparing the interference spectra, the extinction ratio has remained stable at around 20 dB after the MOF was etched. The RI sensing characteristics of the MZI with an etched MOF have also been investigated. The results show that the RI sensitivity can reach up to 2183.6 nm/RIU with a low-temperature coefficient (<10 pm/°C).

[1]  Rodrigo Amezcua-Correa,et al.  Multicore fiber sensor for high-temperature applications up to 1000°C. , 2014, Optics letters.

[2]  H. Tsai,et al.  High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing. , 2011, Applied optics.

[3]  Fei Xu,et al.  Ultra-Sensitive Refractive Index Sensor With Slightly Tapered Photonic Crystal Fiber , 2012, IEEE Photonics Technology Letters.

[4]  H. Choi,et al.  All-fiber Mach-Zehnder type interferometers formed in photonic crystal fiber. , 2007, Optics express.

[5]  Guolu Yin,et al.  Temperature-insensitive refractive index sensor based on in-fiber Michelson interferometer , 2014 .

[6]  A. Zhang,et al.  Fiber-taper seeded long-period grating pair as a highly sensitive refractive-index sensor , 2005, IEEE Photonics Technology Letters.

[7]  Kunimasa Saitoh,et al.  Full-vectorial imaginary-distance beam propagation method based on a finite element scheme: application to photonic crystal fibers , 2002 .

[8]  Jinyan Li,et al.  Design and fabrication of a heterostructured cladding solid-core photonic bandgap fiber for construction of Mach-Zehnder interferometer and high sensitive curvature sensor. , 2018, Optics express.

[9]  B. Lee,et al.  Mach-Zehnder interferometer formed in a photonic crystal fiber based on a pair of long-period fiber gratings. , 2004, Optics letters.

[10]  W. Lukosz,et al.  Integrated optical chemical and direct biochemical sensors , 1995 .

[11]  B J Eggleton,et al.  Single scatterer Fano resonances in solid core photonic band gap fibers. , 2006, Optics express.

[12]  Byeong Ha Lee,et al.  Ultracompact in-line broadband Mach-Zehnder interferometer using a composite leaky hollow-optical-fiber waveguide. , 2008, Optics letters.

[13]  A. González-Cano,et al.  Measurement of the degree of salinity of water with a fiber-optic sensor. , 1999, Applied optics.

[14]  Ian Bennion,et al.  Sensitivity characteristics of long-period fiber gratings , 2002 .

[15]  B. Eggleton,et al.  Resonances in microstructured optical waveguides. , 2003, Optics express.

[16]  Tao Wang,et al.  Temperature-insensitive refractive index sensor based on tilted moiré FBG with high resolution. , 2017, Optics express.

[17]  J. Villatoro,et al.  Thermally stabilized PCF-based sensor for temperature measurements up to 1000 degrees C. , 2009, Optics express.

[18]  S. Yam,et al.  Refractive index sensor based on an abrupt taper Michelson interferometer in a single-mode fiber. , 2008, Optics letters.

[19]  Reginald K. Lee,et al.  Highly sensitive fiber Bragg grating refractive index sensors , 2005 .

[20]  Bai-Ou Guan,et al.  Microfiber interferometric acoustic transducers. , 2014, Optics express.

[21]  Peng Zu,et al.  A Temperature-Insensitive Twist Sensor by Using Low-Birefringence Photonic-Crystal-Fiber-Based Sagnac Interferometer , 2011, IEEE Photonics Technology Letters.

[22]  Zhaobing Tian,et al.  Refractive Index Sensing With Mach–Zehnder Interferometer Based on Concatenating Two Single-Mode Fiber Tapers , 2008, IEEE Photonics Technology Letters.

[23]  Bai-Ou Guan,et al.  Ultrasensitive refractive-index sensors based on rectangular silica microfibers. , 2011, Optics letters.

[24]  Han Chunyang,et al.  Temperature insensitive refractive index sensor based on single-mode micro-fiber Sagnac loop interferometer , 2014 .

[25]  Tao Zhu,et al.  Highly sensitive bend sensor based on Mach–Zehnder interferometer using photonic crystal fiber , 2011 .

[26]  Kai Zhang,et al.  High Sensitivity Refractometer Based on a Tapered-Single Mode-No Core-Single Mode Fiber Structure , 2019, Sensors.

[27]  Yan Yang,et al.  An Ultrasensitive Long-Period Fiber Grating-Based Refractive Index Sensor with Long Wavelengths , 2016, Sensors.

[28]  Jinyan Li,et al.  All fiber M-Z interferometer for high temperature sensing based on a hetero-structured cladding solid-core photonic bandgap fiber. , 2016, Optics express.

[29]  Li Zheng,et al.  Cladding modes in photonic crystal fiber: characteristics and sensitivity to surrounding refractive index , 2016 .