Improving high efficiency reactivity controlled compression ignition combustion with diesel and gasoline direct injection

Computational studies of heavy-duty diesel engine reactivity controlled compression ignition combustion employing both high pressure common rail diesel and low pressure gasoline direct injection were conducted to examine the benefits of using gasoline direct injection compared to port injected gasoline in improving engine performance. In the current study, multi-dimensional modeling using a discrete multi-component fuel vaporization version of the KIVA-3V code was used to examine gasoline direct injection strategies to improve CO and unburned hydrocarbon emissions while maintaining low indicated specific fuel consumption. For a 9 bar indicated mean effective pressure, 1300 r/min operating condition the engine-out CO and unburned hydrocarbonons were reduced by 27.1% and 7.1%, respectively, while engine-out NOx and soot emissions were maintained low. The predicted indicated specific fuel consumption was 159 g/kW h and the maximum pressure rise rate was 6.1 bar/°, which are comparable to or lower than those of the port injected reactivity controlled compression ignition combustion case. Although further study is needed to find optimum injection strategies to improve the combustion efficiency of reactivity controlled compression ignition combustion using gasoline direct injection, the current results show that direct-injecting both high and low reactivity fuels has the potential to reduce CO and unburned hydrocarbon emissions without sacrificing the thermal efficiency benefit of reactivity controlled compression ignition. Moreover, the reduced maximum pressure and pressure rise rate indicates the possibility of improved brake efficiency in reactivity controlled compression ignition combustion and lowered exhaust gas recirculation requirements. The study also explored the use of a low pressure gasoline direct injection injector for the diesel fuel and found that similar results were obtained to those with the high pressure common rail injector. This indicates that reactivity controlled compression ignition combustion is controlled by the global equivalence ratio and fuel reactivity stratification rather than by the location of the stratification in the combustion chamber. This indicates that the complexity and cost of the injection system can be reduced considerably.

[1]  Song-Charng Kong,et al.  Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model , 2007 .

[2]  Rolf D. Reitz,et al.  A combustion model for IC engine combustion simulations with multi-component fuels , 2011 .

[3]  Martin Tuner,et al.  Investigation of Partially Premixed Combustion Characteristics in Low Load Range with Regards to Fuel Octane Number in a Light-Duty Diesel Engine , 2012 .

[4]  John E. Dec,et al.  Boosted HCCI - Controlling Pressure-Rise Rates for Performance Improvements using Partial Fuel Stratification with Conventional Gasoline , 2011 .

[5]  Rolf D. Reitz,et al.  Modeling the Influence of Molecular Interactions on the Vaporization of Multi-component Fuel Sprays , 2011 .

[6]  A. A. Amsden,et al.  KIVA-3V, Release 2: Improvements to KIVA-3V , 1999 .

[7]  Rolf D. Reitz,et al.  An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine , 2010 .

[8]  Wanhua Su,et al.  Using Multiple Injection Strategies in Diesel PCCI Combustion: Potential to Extend Engine Load, Improve Trade-off of Emissions and Efficiency , 2011 .

[9]  Rolf D. Reitz,et al.  Fuel Effects on Reactivity Controlled Compression Ignition (RCCI) Combustion at Low Load , 2011 .

[10]  Bengt Johansson,et al.  Investigation and Comparison of Multi Cylinder Partially Premixed Combustion Characteristics for Diesel and Gasoline Fuels , 2011 .

[11]  D. Splitter,et al.  Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending , 2009 .

[12]  D. Splitter,et al.  Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustion , 2011 .

[13]  Rolf D. Reitz,et al.  Combustion Model for Biodiesel-Fueled Engine Simulations using Realistic Chemistry and Physical Properties , 2011 .

[14]  A. A. Amsden,et al.  KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves , 1997 .

[15]  A. A. Amsden,et al.  KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays , 1989 .

[16]  Rolf D. Reitz,et al.  Piston Bowl Optimization for RCCI Combustion in a Light-Duty Multi-Cylinder Engine , 2012 .

[17]  Derek A. Splitter,et al.  Improving Engine Performance by Optimizing Fuel Reactivity with a Dual Fuel PCCI Strategy , 2010 .

[18]  R. Reitz,et al.  A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels , 2008 .

[19]  R. Reitz,et al.  MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .

[20]  H. Husted,et al.  Full-Time Gasoline Direct-Injection Compression Ignition (GDCI) for High Efficiency and Low NOx and PM , 2012 .

[21]  Rolf D. Reitz,et al.  An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI Combustion , 2010 .

[22]  Rolf D. Reitz,et al.  A vaporization model for discrete multi-component fuel sprays , 2009 .

[23]  Rolf D. Reitz,et al.  Computational Optimization of Reactivity Controlled Compression Ignition in a Heavy-Duty Engine with Ultra Low Compression Ratio , 2011 .

[24]  Christopher J. Rutland,et al.  Numerical Investigation of High Powered Diesel Mode Transition Using Large Eddy Simulations , 2012 .

[25]  Choongsik Bae,et al.  Influence of EGR and Pilot Injection on PCCI Combustion in a Single-Cylinder Diesel Engine , 2011 .

[26]  Rolf D. Reitz,et al.  Effect of Compression Ratio and Piston Geometry on RCCI Load Limits and Efficiency , 2012 .

[27]  Zhen Huang,et al.  Fuel design and management for the control of advanced compression-ignition combustion modes , 2011 .

[28]  D. Richardson,et al.  Mixture Preparation and Combustion Variability in a Spray-Guided DISI Engine , 2007 .

[29]  Rolf D. Reitz,et al.  Computational Optimization of a Heavy-Duty Compression Ignition Engine Fueled with Conventional Gasoline , 2011 .

[30]  D. Splitter,et al.  Reactivity Controlled Compression Ignition (RCCI) Heavy-Duty Engine Operation at Mid-and High-Loads with Conventional and Alternative Fuels , 2011 .

[31]  D. Splitter,et al.  Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines , 2011 .