论文信息 - Cooling efficiency of laminar cooling system for plate mill

Cooling efficiency of laminar cooling system for plate mill

Heat transfer was researched from a perspective of the industry application. On the basis of the first law of thermodynamics, the cooling efficiency was deduced from the change of enthalpy inside hot plate. The relationship between the cooling efficiency and its influencing parameters was regressed from plenty of data collected from the worksite and discussed in detail. The temperature profiles resulting from the online model and the model modified by regressed formulas were presented and compared. The results indicated that the control accuracy of the modified model was increased obviously.

Jun Wang | Ming Yu | Dianhua Zhang | Na Zhou | Bingxing Wang

[1] Siamak Serajzadeh,et al. Prediction of temperature variations and kinetics of austenite phase change on the run-out table , 2006 .

[2] C. G. Sun,et al. A finite element model for the prediction of thermal and metallurgical behavior of strip on run-out-table in hot rolling , 2002 .

[3] Ampere A. Tseng,et al. Cooling of a moving plate with an impinging circular water jet , 1991 .

[4] Ananya Mukhopadhyay,et al. Implementation of an on-line run-out table model in a hot strip mill , 2005 .

[5] R.-M. Guo. Heat transfer of laminar flow cooling during strip acceleration on hot strip mill runout tables , 1993 .

[6] Seikan Ishigai,et al. BOILING HEAT TRANSFER FOR A PLANE WATER JET IMPINGING ON A HOT SURFACE , 1978 .

[7] Javad Mostaghimi,et al. Cooling effectiveness of a water drop impinging on a hot surface , 2001 .

[8] Liu Zheng-dong,et al. Application of Cooling Water in Controlled Runout Table Cooling on Hot Strip Mill , 2004 .

[9] Ampere A. Tseng,et al. Spray and jet cooling in steel rolling , 1992 .

[10] D. A. Zumbrunnen,et al. Method and apparatus for measuring heat transfer distributions on moving and stationary plates cooled by a planar liquid jet , 1990 .