The effect of oxidated glucose on the performance and structures of polyamide resins synthesized by citric acid and hexanediamine

[1]  S. Vineeth,et al.  Sustainable Raw Materials in Hot Melt Adhesives: A Review , 2020 .

[2]  A. Pizzi,et al.  Tannin plywood bioadhesives with non-volatile aldehydes generation by specific oxidation of mono- and disaccharides , 2020, International Journal of Adhesion and Adhesives.

[3]  G. Du,et al.  Novel Highly Branched Polymer Wood Adhesive Resin , 2020 .

[4]  A. Pizzi,et al.  Soy protein isolate-based polyamides as wood adhesives , 2019, Wood Science and Technology.

[5]  S. Mhaske,et al.  Preparation and characterization of a polyester-etheramide hot melt adhesive system from renewable resources , 2019 .

[6]  Zhongyuan Zhao,et al.  Synthesis and Characterization of Sucrose and Ammonium Dihydrogen Phosphate (SADP) Adhesive for Plywood , 2019, Polymers.

[7]  Chuyang Y. Tang,et al.  The upper bound of thin-film composite (TFC) polyamide membranes for desalination , 2019, Journal of Membrane Science.

[8]  C. Frihart,et al.  Specific oxidants improve the wood bonding strength of soy and other plant flours , 2019, Journal of Polymer Science Part A: Polymer Chemistry.

[9]  L. B. Paiva,et al.  Advances in polyamide nanocomposites: A review , 2019 .

[10]  G. Du,et al.  Non-isocyanate polyurethane adhesive from sucrose used for particleboard , 2019, Wood Science and Technology.

[11]  James J. Steffes,et al.  3D printed polyamide membranes for desalination , 2018, Science.

[12]  Wentao Gan,et al.  Mussel Adhesive-Inspired Design of Superhydrophobic Nanofibrillated Cellulose Aerogels for Oil/Water Separation , 2018, ACS Sustainable Chemistry & Engineering.

[13]  Zhiwei Jiang,et al.  Water Transport through Ultrathin Polyamide Nanofilms Used for Reverse Osmosis , 2018, Advanced materials.

[14]  Yuchuan Cheng,et al.  Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling , 2018 .

[15]  Fernando Fraternali,et al.  On the recyclability of polyamide for sustainable composite structures in civil engineering , 2018 .

[16]  R. Palgrave,et al.  Probing the chemical structure of monolayer covalent-organic frameworks grown via Schiff-base condensation reactions. , 2016, Chemical communications.

[17]  Fei Meng,et al.  The Utilization of Amide Groups To Expand and Functionalize Metal-Organic Frameworks Simultaneously. , 2016, Chemistry.

[18]  O. Coronell,et al.  Investigating the void structure of the polyamide active layers of thin-film composite membranes , 2016 .

[19]  Manawwer Alam,et al.  Corn oil based poly(ether amide urethane) coating material—Synthesis, characterization and coating properties , 2014 .

[20]  S. Mhaske,et al.  Synthesis and Characterization of Polyesteramide Hot Melt Adhesive from Low Purity Dimer Acid, Ethylenediamine, and Ethanolamine , 2014 .

[21]  I. Demiate,et al.  Physicochemical properties of cassava starch oxidized by sodium hypochlorite , 2014, Journal of Food Science and Technology.

[22]  Xiu-li Wang,et al.  Preparation and properties of oxidized starch with high degree of oxidation , 2012 .

[23]  H. Mohamed,et al.  Poly(amidoamine) dendritic structures, bearing different end groups, as adhesion promoters for urea–formaldehyde wood adhesive system , 2011 .

[24]  A. Pizzi,et al.  Waste nylon fibre hardeners for improved UF wood adhesives water resistance , 1997, Holz als Roh- und Werkstoff.

[25]  A. Palanisamy,et al.  Photo-DSC and dynamic mechanical studies on UV curable compositions containing diacrylate of ricinoleic acid amide derived from castor oil , 2007 .

[26]  Ya‐Jane Wang,et al.  Structural characteristics and physicochemical properties of oxidized corn starches varying in amylose content. , 2006, Carbohydrate research.

[27]  D. Dukarska,et al.  Optimization of the process of pressing particleboards by means of modifying phenol-formaldehyde resin with amide polymers , 2006, Holz als Roh- und Werkstoff.

[28]  C. Frihart.  Specific adhesion model for bonding hot-melt polyamides to vinyl , 2004 .

[29]  M. Lecourt,et al.  Comparison of TMA and ABES as forecasting systems of wood bonding effectiveness , 2003, Holz als Roh- und Werkstoff.

[30]  A. Pizzi,et al.  Particleboard I.B. forecast by TMA bending in MUF adhesives curing , 2000, Holz als Roh- und Werkstoff.

[31]  Y. Kinoshita.  An investigation of the structures of polyamide series , 1959 .