Control of higher order leaky modes in deep-ridge waveguides and application to low-crosstalk arrayed waveguide gratings

In a lightwave circuit using a strongly confined waveguide, higher order leaky modes must be suppressed to obtain ideal characteristics, especially in arrayed waveguide gratings (AWGs). Propagation loss for higher order leaky modes in InP-based deep-ridge waveguides was investigated by simulation and experiment. A highly sensitive loss measurement method based on optical low-coherence reflectometry was used to determine the loss, and the relationship between the loss for the higher order mode and AWG crosstalk was investigated. Optimizing the deep-ridge waveguide parameters, especially the core thickness, the refractive index of the core, and the etch depth under the core, significantly reduced the propagation loss for the higher order leaky mode. The effective elimination of the higher order modes will enable fabrication of low-crosstalk AWG routers.

[1]  R. van Roijen,et al.  Spectral behavior of InP-based ring lasers employing multimode interference devices , 1993, Proceedings of LEOS '93.

[2]  Y. Shibata,et al.  Controlled beam dry etching of InP by using Br2-N2 Gas , 1995 .

[3]  E.C.M. Pennings,et al.  Optical multi-mode interference devices based on self-imaging: principles and applications , 1995 .

[4]  Optimized offset to eliminate first-order mode excitation at the junction of straight and curved multimode waveguides , 1998, IEEE Photonics Technology Letters.

[5]  M. Kohtoku,et al.  Evaluation of the rejection ratio of an MMI-based higher order mode filter using optical low-coherence reflectometry , 2002, IEEE Photonics Technology Letters.

[6]  Yuzo Yoshikuni,et al.  Polarization-independent InP Arrayed Waveguide Grating Filter Using Deep Ridge Waveguide Structure , 1997, Technical Digest CLEO/Pacific Rim '97 Pacific Rim Conference on Lasers and Electro-Optics.

[7]  A. Sudbø,et al.  Film mode matching: a versatile numerical method for vector mode field calculations in dielectric waveguides , 1993 .

[8]  G. W. Smith,et al.  Optimization of deep-etched, single-mode GaAs-AlGaAs optical waveguides using controlled leakage into the substrate , 1999 .

[9]  E. C. Carr,et al.  Large electroabsorption effect in GaInAs/InP multiple quantum well (MQW) optical modulator grown by OMVPE , 1988 .

[10]  Mk Meint Smit,et al.  PHASAR-based WDM-devices: Principles, design and applications , 1996 .

[11]  Y. Hibino.  High contrast waveguide devices , 2001, OFC 2001. Optical Fiber Communication Conference and Exhibit. Technical Digest Postconference Edition (IEEE Cat. 01CH37171).

[12]  Yuzo Yoshikuni,et al.  Polarization Independent Semiconductor Arrayed Waveguide Gratings Using a Deep-Ridge Waveguide Structure , 1998 .

[13]  M.K. Smit,et al.  Extremely small multimode interference couplers and ultrashort bends on InP by deep etching , 1994, IEEE Photonics Technology Letters.

[14]  H. Melchior,et al.  Polarization insensitive, low-loss, low-crosstalk wavelength multiplexer modules , 1999 .

[15]  Singularity-corrected spectral index method , 1998 .

[16]  J. P. von der Weid,et al.  Optical low coherence reflectometry for characterization of optical devices , 1995, Proceedings of 1995 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference.

[17]  T. Shibata,et al.  400-channel 25-GHz spacing arrayed-waveguide grating covering a full range of C- and L-bands , 2001, OFC 2001. Optical Fiber Communication Conference and Exhibit. Technical Digest Postconference Edition (IEEE Cat. 01CH37171).

[18]  P.-T. Ho,et al.  Compact microring notch filters , 2000, IEEE Photonics Technology Letters.

[19]  Yuzo Yoshikuni,et al.  Polarisation-insensitive semiconductor arrayed waveguide grating integrated with spotsize converter , 2000 .