Vibration power flow and force transmission behaviour of a nonlinear isolator mounted on a nonlinear base

The vibrational power flow and force transmission characteristics of a two-degree-of-freedom (TDOF) nonlinear system are investigated to examine the performance of a nonlinear isolator. The system consists of a harmonically-excited mass, mounted on a single-degree-of-freedom (SDOF) nonlinear flexible base structure through a nonlinear isolator. Both the isolator and the base exhibit damping and stiffness nonlinearities characterized by cubic damping and cubic restoring forces, respectively. The steady-state response of the system is obtained by using the method of averaging and numerical integrations. The bisection method is developed to solve coupled nonlinear frequency response equations. The time-averaged input, dissipated and transmitted powers of the system in the steady-state motion are formulated. Power transmission ratio is proposed as an isolation performance index and compared with force transmissibility. It is found that softening stiffness nonlinearity in the isolator can reduce power transmission ratio, and suppress the peak values of time-averaged power flow and force transmissibility. In comparison, the hardening stiffness in the isolator can lead to a larger power transmission ratio and larger force transmissibility in the high-frequency range. It is shown that power transmission ratio can be reduced by the damping nonlinearity in the isolator, but is enlarged by that in the base. It is also shown that softening nonlinear isolator may provide a better performance than a hardening isolator when the base is of either hardening or softening stiffness nonlinearity. The paper provides a better understanding of the effects of nonlinearities on the performance of nonlinear vibration isolators and demonstrates their potential application to enhance vibration mitigation.

[1]  Daniel J. Inman,et al.  ISOLATION DESIGN FOR A FLEXIBLE SYSTEM , 1998 .

[2]  Timothy P. Waters,et al.  Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness , 2012 .

[3]  Yeping Xiong,et al.  Nonlinear power flow analysis of the Duffing oscillator , 2014 .

[4]  Kris Sikorski,et al.  A bisection method for systems of nonlinear equations , 1984, TOMS.

[5]  W. G. Price,et al.  A power–flow analysis based on continuum dynamics , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[6]  Alexander F. Vakakis,et al.  Nonlinear normal modes, Part I: A useful framework for the structural dynamicist , 2009 .

[7]  B. Mace,et al.  Energy flow models from finite element analysis , 2000 .

[8]  W. Price,et al.  POWER FLOW ANALYSIS OF COMPLEX COUPLED SYSTEMS BY PROGRESSIVE APPROACHES , 2001 .

[9]  J. M. Cuschieri,et al.  Structural power‐flow analysis using a mobility approach of an L‐shaped plate , 1990 .

[10]  William H. Press,et al.  The Art of Scientific Computing Second Edition , 1998 .

[11]  R. G. White,et al.  Vibrational power flow from machines into built-up structures, part I: Introduction and approximate analyses of beam and plate-like foundations , 1980 .

[12]  E. Rivin.  Passive Vibration Isolation , 2003 .

[13]  Thomas J. Royston,et al.  Vibratory power flow through a nonlinear path into a resonant receiver , 1996 .

[14]  W. G. Price,et al.  A power flow mode theory based on a system's damping distribution and power flow design approaches , 2005, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[15]  Cyril M. Harris,et al.  Shock and vibration handbook , 1976 .

[16]  Raouf A. Ibrahim,et al.  Recent advances in nonlinear passive vibration isolators , 2008 .

[17]  Michael J. Brennan,et al.  An investigation of a two-stage nonlinear vibration isolation system , 2013 .

[18]  Robin S. Langley,et al.  A wave intensity technique for the analysis of high frequency vibrations , 1992 .

[19]  G. Kerschen,et al.  Nonlinear Targeted Energy Transfer in Mechanical and Structural Systems , 2008 .

[20]  Jian Yang.  Power flow analysis of nonlinear dynamical systems , 2013 .

[21]  Robin S. Langley,et al.  Analysis of power flow in beams and frameworks using the direct-dynamic stiffness method , 1990 .

[22]  Yeping Xiong,et al.  Dynamics and power flow behaviour of a nonlinear vibration isolation system with a negative stiffness mechanism , 2013 .

[23]  Qingjie Cao,et al.  Power flow characteristics of coupled linear and nonlinear oscillators with irrational nonlinear stiffness , 2011 .

[24]  Jing Tang Xing,et al.  A general linear mathematical model of power flow analysis and control for integrated structure-control systems , 2003 .

[25]  Thomas J. Royston,et al.  OPTIMIZATION OF PASSIVE AND ACTIVE NON-LINEAR VIBRATION MOUNTING SYSTEMS BASED ON VIBRATORY POWER TRANSMISSION , 1996 .

[26]  Jing Tang Xing,et al.  Interactive power flow characteristics of an integrated equipment—nonlinear isolator—travelling flexible ship excited by sea waves , 2005 .

[27]  Yeping Xiong,et al.  Power flow behaviour and dynamic performance of a nonlinear vibration absorber coupled to a nonlinear oscillator , 2015 .

[28]  R. J. Pinnington,et al.  Power flow through machine isolators to resonant and non-resonant beams , 1981 .

[29]  K. W. Wang,et al.  Investigation of a bistable dual-stage vibration isolator under harmonic excitation , 2014, Smart Materials and Structures.