Automated Design of DC-Excited Flux-Switching In-Wheel Motor Using Magnetic Equivalent Circuits

DC-excited flux-switching motors (DCEFSMs) are increasingly considered as candidate traction motors for electric vehicles due to their robust and magnet-free structure with relatively high torque density and extendable speed range. In this paper, an automated design tool based on nonlinear magnetic equivalent circuits (MEC) is initiated for the preliminary design of a 6-stator-segment 5-rotor-tooth DCEFSM used for the indirect drive in-wheel traction of electric cars. This MEC-based design tool is configured using a versatile manner that reduces the workload involved in constructing elaborate MEC models. Using this design tool, parameter sweeping is performed on the split ratio and back iron height of the motor to maximize the torque production with different constraints of flux density. The accuracy of this design tool is validated using finite element analysis.

[1]  Elena A. Lomonova,et al.  Fast torque estimation of in-wheel parallel flux switching machines for hybrid trucks , 2010 .

[2]  Mehrdad Ehsani,et al.  Hybrid Electric Vehicles: Architecture and Motor Drives , 2007, Proceedings of the IEEE.

[3]  Thomas M. Jahns,et al.  A saturating lumped-parameter model for an interior PM synchronous machine , 2002 .

[4]  A. Miraoui,et al.  Use of permeance network method in the demagnetization phenomenon modeling in a permanent magnet motor , 2006, IEEE Transactions on Magnetics.

[5]  Elena A. Lomonova,et al.  Comparison of flux‐switching machines and permanent magnet synchronous machines in an in‐wheel traction application , 2012 .

[6]  I.J.M. Besselink,et al.  Influence of in-wheel motors on the ride comfort of electric vehicles , 2010 .

[7]  Vlado Ostović,et al.  Dynamics of Saturated Electric Machines , 1989 .

[8]  Arne Nysveen,et al.  Analytical design of a high-torque flux-switching permanent magnet machine by a simplified lumped parameter magnetic circuit model , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[9]  T.J.E. Miller,et al.  Validation of lumped-circuit and finite-element modelling of axially-laminated brushless motors , 1993 .

[10]  Kenji Nakamura,et al.  Electromagnetic and motion-coupled analysis for switched reluctance motor based on reluctance network analysis , 2005 .

[11]  E.A. Lomonova,et al.  Analysis and initial synthesis of a novel linear actuator with active magnetic suspension , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[12]  Johannes J. H. Paulides,et al.  Flux-Switching Machine With DC Excitation , 2012, IEEE Transactions on Magnetics.

[13]  J Juraj Makarovic.  Lightweight positioning : design and optimization of an actuator with two controlled degrees of freedom , 2006 .

[14]  S. E. Rauch,et al.  Design Principles of Flux-Switch Alternators [includes discussion] , 1955, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[15]  Johannes J. H. Paulides,et al.  General Formulation of the Electromagnetic Field Distribution in Machines and Devices Using Fourier Analysis , 2010, IEEE Transactions on Magnetics.

[16]  Zi-Qiang Zhu,et al.  Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[17]  A.J.A. Vandenput,et al.  Analysis of a Variable Reluctance Permanent Magnet Actuator , 2007, 2007 IEEE Industry Applications Annual Meeting.

[18]  Johannes J. H. Paulides,et al.  Analytical Hybrid Model for Flux Switching Permanent Magnet Machines , 2010, IEEE Transactions on Magnetics.

[19]  M.L. Liou,et al.  Computer-aided analysis of electronic circuits: Algorithms and computational techniques , 1977, Proceedings of the IEEE.

[20]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[21]  J. D'Angelo,et al.  Finite Element Applications in Electrical Engineering , 1992, Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation.

[22]  Xiaojing Huang,et al.  Nonlinear varying-network magnetic circuit analysis for doubly salient permanent-magnet motors , 2000 .

[23]  Elena A. Lomonova,et al.  In‐wheel PM motor: compromise between high power density and extended speed capability , 2011 .

[24]  Johannes J. H. Paulides,et al.  Modeling of Flux Switching Permanent Magnet Machines With Fourier Analysis , 2010, IEEE Transactions on Magnetics.

[25]  E. A. Lomonova,et al.  Indirect drive in-wheel system for HEV/EV traction , 2013, 2013 World Electric Vehicle Symposium and Exhibition (EVS27).

[26]  D. Howe,et al.  Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model , 2005, IEEE Transactions on Magnetics.