Investigation Into the Use of Commercial Sands and Fines to Replicate Oil Sands for Large-Scale Sand Control Testing

[1]  Matt Abram,et al.  Particle-Size Analysis for the Pike 1 Project, McMurray Formation , 2014 .

[2]  Vahidoddin Fattahpour,et al.  An experimental investigation on the effect of rock strength and perforation size on sand production , 2012 .

[3]  Tracey Ballard,et al.  An Investigation of Sand Retention Testing With a View To Developing Better Guidelines for Screen Selection , 2012 .

[4]  H. S. Fogler,et al.  Fines migration and formation damage; Influence of pH and ion exchange , 1992 .

[5]  D. Krinsley,et al.  Environmental Interpretation of Sand Grain Surface Textures by Electron Microscopy , 1968 .

[6]  Formation Wettability Studies that Incorporate the Dynamic Wilhelmy Plate Technique , 1989 .

[7]  K. Soga,et al.  Particle shape characterisation using Fourier descriptor analysis , 2001 .

[8]  Luis E. Vallejo,et al.  Fractal analysis of granular materials , 1995 .

[9]  Jacob Masliyah,et al.  Interaction forces in bitumen extraction from oil sands. , 2005, Journal of colloid and interface science.

[10]  U. Romanova,et al.  Thermal Formation Damage and Relative Permeability of Oil Sands of the Lower Cretaceous Formations in Western Canada , 2015 .

[11]  N. Kessler,et al.  The effect of anisotropic stress state on the stability of perforation cavities , 1993 .

[12]  Justine Odong,et al.  Evaluation of Empirical Formulae for Determination of Hydraulic Conductivity based on Grain-Size Analysis , 2007 .

[13]  Alireza Nouri,et al.  Oil Sand Characterization for Standalone Screen Design and Large-Scale Laboratory Testing for Thermal Operations , 2015 .

[14]  Kenichi Maeda,et al.  METHOD OF MEASUREMENT FOR THE ANGLE OF REPOSE OF SANDS , 1997 .

[15]  W. D. Kovacs,et al.  An Introduction to Geotechnical Engineering , 1981 .

[16]  L. Kotlyar,et al.  Athabasca oil sands: effect of organic coated solids on bitumen recovery and quality , 2003 .

[17]  Andjelko Soro,et al.  Determination of Hydraulic Conductivity of Porous Media from Grain-Size Composition , 1992 .

[18]  J. Tronvoll,et al.  Sand production: Mechanical failure or hydrodynamic erosion? , 1997 .

[19]  Taro Takahashi,et al.  APPLICATIONS OF ELECTRON MICROSCOPY TO GEOLOGY , 1962 .

[20]  G. Cascante,et al.  Effect of surface roughness on wave propagation parameters , 1998 .

[21]  Alireza Nouri,et al.  A comparison of two sanding criteria in physical and numerical modeling of sand production , 2006 .

[22]  C. Wentworth.  A Laboratory and Field Study of Cobble Abrasion , 1919, The Journal of Geology.

[23]  T. C. Kenney,et al.  Internal stability of granular filters , 1985 .

[24]  M. Diepenbroek,et al.  How round is round? A new approach to the topic ‘roundness’by Fourier grain shape analysis , 1992 .

[25]  Cheng Cheng,et al.  Evaluation of methods for determination of hydraulic properties in an aquifer–aquitard system hydrologically connected to a river , 2007 .

[26]  Alireza Nouri,et al.  An Experimental Investigation of the Effect of pH and Salinity on Sand Control Performance for Heavy Oil Thermal Production , 2016 .

[27]  J. Rodríguez.  Importance of the particle shape on mechanical properties of soil materials , 2013 .

[28]  M. Moosavi,et al.  An experimental investigation on the effect of grain size on oil-well sand production , 2012, Petroleum Science.

[29]  V. Rasouli,et al.  Proposing a sample preparation procedure for sanding experiments , 2012 .

[30]  James Irving,et al.  Impact of changes in grain size and pore space on the hydraulic conductivity and spectral induced polarization response of sand , 2011 .

[31]  N. Devere-Bennett.  Using Prepack Sand-Retention Tests (SRT's) to Narrow Down Liner/Screen Sizing in SAGD Wells , 2015 .

[32]  G. Kienitz,et al.  Seepage hydraulics, developments in water science, 10: G. Kovacs. Elsevier, Amsterdam/Oxford/New York, 1981. 730 pp., US$134.25/Dfl. 275. ISBN 0-444-99755-5 , 1982 .

[33]  J. Yamamuro,et al.  Effect of depositional method on the undrained behavior and microstructure of sand with silt , 2004 .

[34]  D. B. Bennion,et al.  Protocols for Slotted Liner Design for Optimum SAGD Operation , 2008 .