Effects of hot dipping temperature on microstructure and mechanical properties of Pb40Sn60 alloy coating on copper wires

[1]  Xiaogang Li,et al.  Distinct beneficial effect of Sn on the corrosion resistance of Cr–Mo low alloy steel , 2021 .

[2]  X. Mi,et al.  Effects of strain rates on dynamic deformation behavior of Cu-20Ag alloy , 2021, Journal of Materials Science & Technology.

[3]  C. Dong,et al.  Study on corrosion behavior of β-Sn and intermetallic compounds phases in SAC305 alloy by in-situ EC-AFM and first-principles calculation , 2021 .

[4]  A. Alhozaimy,et al.  Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment , 2021 .

[5]  Yihang Fan,et al.  Study on staged work hardening mechanism of nickel-based single crystal alloy during atomic and close-to-atomic scale cutting , 2021 .

[6]  B. Lu,et al.  Microstructure evolution of wire-arc additively manufactured 2319 aluminum alloy with interlayer hammering , 2021 .

[7]  Lei Zheng,et al.  Microstructure evolution dependence of work-hardening characteristic in cold deformation of a difficult-to-deform nickel-based superalloy , 2021 .

[8]  T. Langdon,et al.  An examination of microstructural evolution in a Pb–Sn eutectic alloy processed by high-pressure torsion and subsequent self-annealing , 2021, Materials Science and Engineering: A.

[9]  T. Yagai,et al.  Microstructural study on Sn–Zn/Cu–Ti diffusion reaction for internal tin Nb3Sn conductor development , 2020 .

[10]  Abhay Gupta,et al.  Evolution of texture and strain in Sn coating with Cr addition and its effect on the coating corrosion behavior , 2020 .

[11]  H. Terryn,et al.  Electrochemical behaviour of 22MnB5 steel coated with hot-dip Al-Si before and after hot-stamping process investigated by means of scanning Kelvin probe microscopy , 2020 .

[12]  Chiung-Wen Hsu,et al.  Characterization of the FeAl intermetallic layer formed at Fe Zn interface of a hot-dip galvanized coating containing 5 wt.% Al , 2020 .

[13]  H. Terryn,et al.  The effect of time evolution and timing of the electrochemical data recording of corrosion inhibitor protection of hot-dip galvanized steel , 2020, Corrosion Science.

[14]  A. Volinsky,et al.  Effects of Cr addition on the constitutive equation and precipitated phases of copper alloy during hot deformation , 2020 .

[15]  Mingde Sun,et al.  Residual stresses of heat-treated and hot-dip galvanized RHS cold-formed by different methods , 2020 .

[16]  A. Hubin,et al.  Electrochemical and Raman analysis of the corrosion products formed over hot dip galvanised steel wires exposed in different environmental sites , 2020, Corrosion Engineering, Science and Technology.

[17]  W. Xiaodong,et al.  Online Electromagnetic Measurement of Molten Zinc Surface Velocity in Hot Galvanized Process , 2020 .

[18]  A. Królikowska,et al.  Pitting Corrosion of Hot-Dip Galvanized Coatings , 2020, Materials.

[19]  S. M. M. Khoei,et al.  High-temperature oxidation behaviors of plasma electrolytic oxidation coating on hot-dip aluminized HP40Nb alloy , 2020, Surface and Coatings Technology.

[20]  F. Goodwin,et al.  Morphology of Fe2Al5 particles and the interface to WC coating in the context of hot-dip galvanizing: An ab initio study , 2020 .

[21]  K. Bhat,et al.  Microstructural investigations on the hot-dip aluminized AISI 321 stainless steel after diffusion treatment , 2019, Surface and Coatings Technology.

[22]  F. Han,et al.  Improvement of corrosion resistance of twinning-induced plasticity steel by hot-dipping aluminum with subsequent thermal diffusion treatment , 2019, Materials Letters.

[23]  S. Khorsand,et al.  Electrochemical corrosion behaviour of Sn-Zn-xBi alloys used for miniature detonating cords , 2019, Journal of Materials Science & Technology.

[24]  A. Chakraborty,et al.  Microstructural investigation and corrosion behavior of hot-dipped Al-Si-Mg-Cu alloy coated steel , 2019, Surface and Coatings Technology.

[25]  M. Zasadzińska,et al.  Research on the drawing process of Cu and CuZn wires obtained in the cryogenic conditions , 2019, Cryogenics.

[26]  M. Baskes,et al.  Thermodynamics of solid Sn and Pb Sn liquid mixtures using molecular dynamics simulations , 2018, Acta Materialia.

[27]  T. Langdon,et al.  Comparisons of self-annealing behaviour of HPT-processed high purity Cu and a Pb–Sn alloy , 2017 .

[28]  Weiquan Cai,et al.  Optical characterization of mechanically alloyed PbSnS3 nanocrystals , 2017 .

[29]  Jei-Pil Wang,et al.  Recovery of Pb-Sn Alloy and Copper from Photovoltaic Ribbon in Spent Solar Module , 2017 .

[30]  Meng Meng,et al.  Creep-caused fracture of PbSn solder joint , 2017 .

[31]  C. Li,et al.  Thermoelectric properties of TiS2-xPbSnS3 nanocomposites , 2017 .

[32]  H. Qin,et al.  New type of quantum spin Hall insulators in hydrogenated PbSn thin films , 2017, Scientific Reports.

[33]  Weiqing Chen,et al.  Effect of permanent magnet stirring on solidification of Sn-Pb alloy , 2016 .

[34]  T. Langdon,et al.  Self-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion , 2016 .

[35]  O. Saray.  Biaxial deformation behavior and formability of precipitation hardened ultra-fine grained (UFG) Cu–Cr–Zr alloy , 2016 .

[36]  Z. Ren,et al.  Effect of a transverse magnetic field on solidification morphology and microstructures of pure Sn and Sn–15 wt% Pb alloys grown by a Czochralski method , 2015 .

[37]  K. Biswas,et al.  Formation and Stability of Pb-Sn Embedded Multiphase Alloy Nanoparticles via Mechanical Alloying , 2015, Metallurgical and Materials Transactions A.

[38]  Xionggang Lu,et al.  Effect of a transverse magnetic field on solidification structure in directionally solidified Sn–Pb hypoeutectic alloys , 2014 .

[39]  Dafan Du,et al.  Effect of an axial high magnetic field on Sn dendrite morphology of Pb–Sn alloys during directional solidification , 2014 .

[40]  Fan Yang,et al.  Study of the Microstructure and Mechanical Properties of Pbsn Alloys Deposited on Carbon Fiber Reinforced Epoxy Composites , 2014 .

[41]  V. Fadin,et al.  Changes in the electric conductance of sliding contacts under occurrence of a Pb–Sn melt in the contact space , 2013 .

[42]  Lei Wang,et al.  Effects of melt flow on the primary dendrite spacing of Pb–Sn binary alloy during directional solidification , 2011 .

[43]  Xiaodong He,et al.  Microstructure and mechanical properties of PbSn alloys deposited on carbon fiber reinforced epoxy composites , 2010 .