Transient characteristics of proton exchange membrane fuel cells with different flow field designs

Abstract This work establishes three-dimensional transient numerical models of proton exchange membrane fuel cells (PEMFCs) with different cathode flow field designs. Exactly how flow field design and voltage loading affect the transient characteristics of the PEMFCs are examined. When the operating voltage instantaneously drops from 0.7 V to 0.5 V, the electrochemical reactions increase. To ensure sufficient oxygen supply for the fuel cell, the oxygen mass fractions are high in the cathode gas diffusion and cathode catalyst layers, causing overshoot of the local current density distribution. When the operating voltage suddenly increases from 0.5 V to 0.7 V, the electrochemical reactions become mild, and furthermore the oxygen mass fraction distribution becomes low, leading to undershoot of the local current density distribution. The transient response time required to reach the steady state for the parallel flow field with baffle design is longest in the event of overshoot or undershoot among the different cathode flow field designs. The overshoot or undershoot phenomena become more obvious with larger voltage loading variations. Moreover, the transient response time for the Z-type flow field with baffle design is longer than for the Z-type flow field design.

[1]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[2]  Wei-Mon Yan,et al.  Transient analysis of water transport in PEM fuel cells , 2006 .

[3]  Hongtan Liu,et al.  A two-phase flow and transport model for the cathode of PEM fuel cells , 2002 .

[4]  Hung-Yi Li,et al.  Three-Dimensional Analysis of PEMFCs with Different Flow Channel Designs , 2006 .

[5]  Sadik Kakac,et al.  Two‐dimensional model for proton exchange membrane fuel cells , 1998 .

[6]  Wang Ying,et al.  Three-dimensional analysis for effect of channel configuration on the performance of a small air-breathing proton exchange membrane fuel cell (PEMFC) , 2005 .

[7]  Anzhong Gu,et al.  Three dimensional, two phase flow mathematical model for PEM fuel cell: Part I. Model development , 2004 .

[8]  Song-Yul Choe,et al.  A high dynamic PEM fuel cell model with temperature effects , 2005 .

[9]  Trung Van Nguyen,et al.  A Gas Distributor Design for Proton‐Exchange‐Membrane Fuel Cells , 1996 .

[10]  Trung Van Nguyen,et al.  A Two-Dimensional, Two-Phase, Multicomponent, Transient Model for the Cathode of a Proton Exchange Membrane Fuel Cell Using Conventional Gas Distributors , 2001 .

[11]  Ned Djilali,et al.  THREE-DIMENSIONAL COMPUTATIONAL ANALYSIS OF TRANSPORT PHENOMENA IN A PEM FUEL CELL , 2002 .

[12]  Xianguo Li,et al.  Mathematical modeling of proton exchange membrane fuel cells , 2001 .

[13]  Sandip Mazumder,et al.  Rigorous 3-D mathematical modeling of PEM fuel cells. II. Model predictions with liquid water transport , 2003 .

[14]  Wei-Mon Yan,et al.  Reactant gas transport and cell performance of proton exchange membrane fuel cells with tapered flow field design , 2006 .

[15]  P. R. Pathapati,et al.  A new dynamic model for predicting transient phenomena in a PEM fuel cell system , 2005 .

[16]  Datong Song,et al.  Transient analysis for the cathode gas diffusion layer of PEM fuel cells , 2006 .

[17]  Ali Feliachi,et al.  Modeling and simulation of the dynamic behavior of a polymer electrolyte membrane fuel cell , 2003 .

[18]  Ramana G. Reddy,et al.  Effect of gas flow-field design in the bipolar/end plates on the steady and transient state performance of polymer electrolyte membrane fuel cells , 2006 .

[19]  Sirivatch Shimpalee,et al.  Predicting the transient response of a serpentine flow-field PEMFC: I. Excess to normal fuel and air , 2006 .

[20]  Massimo Ceraolo,et al.  Modelling static and dynamic behaviour of proton exchange membrane fuel cells on the basis of electro-chemical description , 2003 .

[21]  Wei-Mon Yan,et al.  Effects of flow distributor geometry and diffusion layer porosity on reactant gas transport and performance of proton exchange membrane fuel cells , 2004 .

[22]  Sirivatch Shimpalee,et al.  Predicting the transient response of a serpentine flow-field PEMFC: II: Normal to minimal fuel and AIR , 2006 .

[23]  T. Nguyen,et al.  Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells , 1998 .

[24]  Xianguo Li,et al.  Non-isothermal transient modeling of water transport in PEM fuel cells , 2007 .

[25]  Anzhong Gu,et al.  Three dimensional, two phase flow mathematical model for PEM fuel cell: Part II. Analysis and discussion of the internal transport mechanisms , 2004 .

[26]  H. Meng.  Numerical investigation of transient responses of a PEM fuel cell using a two-phase non-isothermal mixed-domain model , 2007 .

[27]  Wang Ying,et al.  Three-dimensional modeling and experimental investigation for an air-breathing polymer electrolyte membrane fuel cell (PEMFC) , 2005 .

[28]  Wei-Mon Yan,et al.  Effects of baffle-blocked flow channel on reactant transport and cell performance of a proton exchange membrane fuel cell , 2005 .

[29]  Shanhai Ge,et al.  A mathematical model for PEMFC in different flow modes , 2003 .

[30]  Chao-Yang Wang,et al.  Transient analysis of polymer electrolyte fuel cells , 2005 .

[31]  Trung Van Nguyen,et al.  Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell , 2003 .

[32]  B. Wetton,et al.  Water Management in PEM Fuel Cells , 2004 .

[33]  N. Djilali,et al.  Influence of heat transfer on gas and water transport in fuel cells , 2002 .

[34]  Suk Won Cha,et al.  The scaling behavior of flow patterns: a model investigation , 2004 .

[35]  Wei-Mon Yan,et al.  Transient analysis of reactant gas transport and performance of PEM fuel cells , 2005 .

[36]  Sirivatch Shimpalee,et al.  Prediction of transient response for a 25-cm2 PEM fuel cell , 2007 .

[37]  J. C. Amphlett,et al.  A model predicting transient responses of proton exchange membrane fuel cells , 1996 .

[38]  Guilin Hu,et al.  Transient computation fluid dynamics modeling of a single proton exchange membrane fuel cell with serpentine channel , 2007 .

[39]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[40]  S. Rael,et al.  Mathematical model and characterization of the transient behavior of a PEM fuel cell , 2004, IEEE Transactions on Power Electronics.

[41]  T. Nguyen,et al.  Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields , 2000 .