Clay in cement-based materials: Critical overview of state-of-the-art

Abstract Limitations in guidelines and standards on the amount of clay in sand and coarse aggregate micro-fines and the influence of such micro-fines on fresh and hardened concrete properties is often ambiguous for practitioners and quality control professionals. This is compounded by conflicting related data in the open literature and the inadequacy of some standard test procedures for capturing the real problems associated with the presence of clays in cement-based materials. This paper examines the various types of clay, limitations on clays in aggregates in various standards, and the test methods used to assess the presence of clays in aggregates. A critical overview of literature on the possible effects of clay in cement-based materials is provided, including effects on water demand, workability, mechanical strength, dimensional stability and chemical admixtures dosage. The problem of dimensional stability of aggregates bearing clay minerals is examined. Possible chemical treatment of clays to mitigate their detrimental effects in concrete is also outlined. Finally, emerging research on using nano-clays in cement-based materials is highlighted and recommendations to resolve ambiguity related to the presence of clays in cement-based materials are proposed.

[1]  G. Brown.  Crystal structures of clay minerals and related phyllosilicates , 1984, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[2]  Mark Beacraft,et al.  Effect of mineral admixtures on formwork pressure of self-consolidating concrete , 2010 .

[3]  Jong-Shin Huang,et al.  Effects of organo-modified montmorillonite on strengths and permeability of cement mortars , 2006 .

[4]  Luc Courard,et al.  Influence of clay in limestone fillers for self compacting cement based composites , 2011 .

[5]  R. Lopes,et al.  Effect of clay water interactions on clay swelling by X-ray diffraction , 2007 .

[6]  A. Yool,et al.  Improvements to the methylene blue dye test for harmful clay in aggregates for concrete and mortar , 1998 .

[7]  L. A. Wood,et al.  Adsorption of Water Vapor by Montmorillonite. II. Effect of Exchangeable Ions and Lattice Swelling as Measured by X-Ray Diffraction , 1952 .

[8]  James K. Mitchell,et al.  Fundamentals of soil behavior , 1976 .

[9]  L. Quintero.  An Overview of Surfactant Applications in Drilling Fluids for the Petroleum Industry , 2002 .

[10]  Qian Jue-shia.  Effects of clay on the dispersibility of cement paste mixed with polycarboxylate superplasticizer , 2012 .

[11]  D. Fowler,et al.  Influence of Clays and Clay-Sized Particles on Concrete Performance , 2007 .

[12]  C.M.L. Wu,et al.  Durability of concrete with high cement replacement , 2000 .

[13]  Mette Rica Geiker,et al.  Microstructure engineering of Portland cement pastes and mortars through addition of ultrafine layer silicates , 2008 .

[14]  W F Cole,et al.  A PROPOSED SECONDARY MINERAL RATING FOR BASALT ROAD AGGREGATE DURABILITY , 1980 .

[15]  Johann Plank,et al.  A concept for a polycarboxylate superplasticizer possessing enhanced clay tolerance , 2012 .

[16]  Pham Till Hang,et al.  Methylene Blue Absorption by Clay Minerals. Determination of Surface Areas and Cation Exchange Capacities (Clay-Organic Studies XVIII) , 1970 .

[17]  Nathan Tregger,et al.  Improving the slipform process via material manipulation , 2007 .

[18]  Surendra P. Shah,et al.  Rheology of extruded cement-based materials , 2007 .

[19]  Jeng-Ywan Shih,et al.  Material properties of portland cement paste with nano-montmorillonite , 2007 .

[20]  A. Shayan.  Aggregate selection for durability of concrete structures , 2011 .

[21]  B. Li,et al.  C60 High Performance Concrete Prepared from Manufactured Sand with a High Content of Microfines , 2009 .

[22]  I. Topcu,et al.  Relationship between methylene blue values of concrete aggregate fines and some concrete properties , 2008 .

[23]  Constantine D. Papaspyrides,et al.  A review on polymer–layered silicate nanocomposites , 2008 .

[24]  Liu Beixing,et al.  Effect of the Methylene Blue Value of Manufactured Sand on Performances of Concrete , 2011 .

[25]  Abdul-Ghani Olabi,et al.  Effect of nano clay particles on mechanical, thermal and physical behaviours of waste-glass cement mortars , 2011 .

[26]  Surendra P. Shah,et al.  Low Compaction Energy Concrete for Improved Slipform Casting of Concrete Pavements , 2007 .

[27]  Changhua Mu,et al.  Swelling Inhibition by Polyglycols in Montmorillonite Dispersions , 2004 .

[28]  P. Fairbairn.  Liquid Limit and Dye Adsorption , 1957 .

[29]  S. H. Alsayed,et al.  Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar , 2011 .

[30]  Sw Forster,et al.  Soundness, Deleterious Substances, and Coatings , 1994 .

[31]  P. Purnell,et al.  The effect of clay content in sands used for cementitious materials in developing countries , 2007 .

[32]  Etsuo Sakai,et al.  INTERACTION BETWEEN SUPERPLASTICIZERS AND CLAY MINERALS , 2005 .

[33]  Richard L. Anderson,et al.  Clay swelling — A challenge in the oilfield , 2010 .

[34]  Robert L. Lytton,et al.  Developing a Mixture Design Specification for Flexible Base Construction , 2011 .

[35]  S. Cramer,et al.  Effects of Coarse Aggregate Coatings on Concrete Performance , 2010 .

[36]  P. Hang.  Methylene Blue Adsorption by Clay Minerals, Determination of Surface Areas and Cation Exchange Capacities , 1970 .

[37]  J. Quirk,et al.  The adsorption of water from concentrated electrolyte solutions by montmorillonite and illite , 1964, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[38]  Kevin J. Folliard,et al.  Interaction of Superplasticizers with Clay-Bearing Aggregates , 2003, SP-217: Seventh CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in Concrete.

[39]  Serina Ng,et al.  Interaction mechanisms between Na montmorillonite clay and MPEG-based polycarboxylate superplasticizers , 2012 .

[40]  Surendra P. Shah,et al.  Using Fly Ash, Clay, and Fibers for Simultaneous Improvement of Concrete Green Strength and Consolidatability for Slip-Form Pavement , 2010 .